{"product_id":"banks-power-monster-ram-intake-heater-grid-upgrade-natural-red-42806-2007-5-2012-6-7l-cummins-cab-chassis","title":"BANKS POWER MONSTER-RAM INTAKE \u0026 HEATER GRID UPGRADE NATURAL \u0026 RED 42806 | 2007.5-2012 6.7L CUMMINS CAB \u0026 CHASSIS","description":"\u003cp\u003eImprove intake airflow and address the factory grid heater design on your Cab \u0026amp; Chassis Ram 3500\/4500\/5500 6.7L Cummins with the Banks Power Monster-Ram Intake \u0026amp; Heater Grid Upgrade. This system combines the high-flow Monster-Ram intake manifold with a billet intake plate and Banks coil heater to significantly reduce intake restriction while retaining cold-weather starting capability.\u003c\/p\u003e\n\n\u003cp\u003eWith the Banks coil heater and high-flow billet intake plate installed, Banks reports airflow increases from 38.6 lbs\/min with the factory configuration to 72.7 lbs\/min, an improvement of approximately 88.3%. The larger, less restrictive intake tract improves airflow from the intercooler and is engineered to increase boost without increasing turbine drive pressure, supporting improved throttle response and engine breathing during daily driving, towing, and heavy hauling.\u003c\/p\u003e\n\n\u003cp\u003eThe system replaces the factory grid heater assembly with a CNC-machined high-flow billet intake plate and vertically positioned Banks coil heater. This eliminates the factory grid heater hardware that can loosen after prolonged exposure to heat, vibration, and mileage, potentially allowing components to enter the intake tract and cause severe engine damage. The Banks coil heater maintains factory-like cold-weather starting performance while creating significantly less airflow obstruction.\u003c\/p\u003e\n\n\u003cp\u003eA proprietary replacement fuel line provides additional clearance for the Monster-Ram's larger airflow path. Four 1\/8-inch NPT ports also provide convenient locations for compatible pressure, temperature, or other sensors, including monitoring equipment used with Banks iDash systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for Cab \u0026amp; Chassis Ram applications\u003c\/li\u003e\n  \u003cli\u003e3-3\/8\" intake inlet\u003c\/li\u003e\n  \u003cli\u003eFlows approximately 88.3% more air than the factory configuration\u003c\/li\u003e\n  \u003cli\u003eTested airflow of 72.7 lbs\/min compared to 38.6 lbs\/min stock\u003c\/li\u003e\n  \u003cli\u003eLarger and less restrictive than the factory intake manifold\u003c\/li\u003e\n  \u003cli\u003eImproves airflow from the intercooler into the engine\u003c\/li\u003e\n  \u003cli\u003eDesigned to increase boost without increasing turbine drive pressure\u003c\/li\u003e\n  \u003cli\u003eHelps improve throttle response and engine breathing\u003c\/li\u003e\n  \u003cli\u003eHigh-flow Banks coil heater maintains cold-weather starting capability\u003c\/li\u003e\n  \u003cli\u003eHigh-flow billet intake plate replaces the restrictive factory grid heater\u003c\/li\u003e\n  \u003cli\u003eEliminates factory grid heater hardware associated with potential intake-side engine damage\u003c\/li\u003e\n  \u003cli\u003eCNC port-matched billet intake plate minimizes airflow restriction\u003c\/li\u003e\n  \u003cli\u003eDesigned to optimize intake air pressure and distribution\u003c\/li\u003e\n  \u003cli\u003eIncludes proprietary replacement fuel line for improved intake clearance\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting locations\u003c\/li\u003e\n  \u003cli\u003e(4) 1\/8\" NPT ports for compatible pressure, temperature, or other sensors\u003c\/li\u003e\n  \u003cli\u003eAvailable in natural aluminum or red powder-coated finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonster-Ram Intake Manifold\u003c\/li\u003e\n  \u003cli\u003eBanks High-Flow Coil Heater\u003c\/li\u003e\n  \u003cli\u003eHigh-Flow Billet Intake Plate\u003c\/li\u003e\n  \u003cli\u003eProprietary Replacement Fuel Line\u003c\/li\u003e\n  \u003cli\u003eRequired Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRam 3500 Cab \u0026amp; Chassis equipped with the 6.7L Cummins diesel engine\u003c\/li\u003e\n  \u003cli\u003eRam 4500 Cab \u0026amp; Chassis equipped with the 6.7L Cummins diesel engine\u003c\/li\u003e\n  \u003cli\u003eRam 5500 Cab \u0026amp; Chassis equipped with the 6.7L Cummins diesel engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory MAP sensor is mounted to the intake elbow and must be transferred to the Banks Monster-Ram during installation. Replacement of a functioning MAP sensor is not required, but the sensor should be inspected for soot buildup while removed. Clean or replace the sensor as necessary to help maintain accurate pressure and temperature readings.\u003c\/p\u003e","brand":"Banks Power","offers":[{"title":"Natural","offer_id":53950543397147,"sku":"42806-N","price":868.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53950543429915,"sku":"42806-R","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-09-15at12.21.00PM.png?v=1789673917","url":"https:\/\/wwmperformance.com\/products\/banks-power-monster-ram-intake-heater-grid-upgrade-natural-red-42806-2007-5-2012-6-7l-cummins-cab-chassis","provider":"WWM Performance","version":"1.0","type":"link"}