{"product_id":"banks-power-monster-ram-intake-heater-grid-upgrade-natural-red-42805-2019-2024-6-7l-cummins-cab-chassis","title":"BANKS POWER MONSTER-RAM INTAKE \u0026 HEATER GRID UPGRADE NATURAL \u0026 RED 42805 | 2019-2024 6.7L CUMMINS CAB \u0026 CHASSIS","description":"\u003cp\u003eImprove intake airflow and address the factory grid heater design on your Ram 3500\/4500\/5500 6.7L Cummins with the Banks Power Monster-Ram Intake \u0026amp; Heater Grid Upgrade. The system combines the high-flow Monster-Ram intake manifold with a billet intake plate and Banks coil heater to reduce intake restriction while retaining cold-weather starting capability.\u003c\/p\u003e\n\n\u003cp\u003eWith the Banks coil heater and high-flow billet intake plate installed, Banks reports airflow increases from 38.6 lbs\/min with the factory configuration to 72.7 lbs\/min, an improvement of approximately 88.3%. The larger, less restrictive intake path improves airflow from the intercooler and is engineered to increase boost without increasing turbine drive pressure, supporting improved throttle response and engine breathing during daily driving, towing, and heavy hauling.\u003c\/p\u003e\n\n\u003cp\u003eThe system also replaces the factory grid heater assembly and its associated intake hardware. The factory heater's electrical connection hardware can loosen after exposure to heat, vibration, and extended service, creating the potential for components to enter the intake tract and cause engine damage. Banks replaces this assembly with a CNC-machined high-flow billet intake plate and vertically positioned coil heater, maintaining cold-start heating while minimizing airflow obstruction.\u003c\/p\u003e\n\n\u003cp\u003eA proprietary replacement fuel line provides the clearance necessary for the Monster-Ram's larger airflow path without requiring additional tuning. Four 1\/8-inch NPT ports provide convenient locations for compatible pressure, temperature, and other sensors, including monitoring configurations utilizing Banks iDash equipment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-3\/8\" intake inlet\u003c\/li\u003e\n  \u003cli\u003eFlows approximately 88.3% more air than the factory configuration\u003c\/li\u003e\n  \u003cli\u003eTested airflow of 72.7 lbs\/min compared to 38.6 lbs\/min stock\u003c\/li\u003e\n  \u003cli\u003eLarger and less restrictive than the factory intake manifold\u003c\/li\u003e\n  \u003cli\u003eImproves airflow from the intercooler into the engine\u003c\/li\u003e\n  \u003cli\u003eDesigned to increase boost without increasing turbine drive pressure\u003c\/li\u003e\n  \u003cli\u003eHelps improve throttle response and engine breathing\u003c\/li\u003e\n  \u003cli\u003eHigh-flow Banks coil heater maintains cold-weather starting capability\u003c\/li\u003e\n  \u003cli\u003eHigh-flow billet intake plate replaces the factory grid heater assembly\u003c\/li\u003e\n  \u003cli\u003eEliminates factory grid heater hardware associated with potential intake-side engine damage\u003c\/li\u003e\n  \u003cli\u003eCNC port-matched billet intake plate minimizes airflow restriction\u003c\/li\u003e\n  \u003cli\u003eDesigned to optimize intake air pressure and distribution\u003c\/li\u003e\n  \u003cli\u003eIncludes proprietary replacement fuel line for improved intake clearance\u003c\/li\u003e\n  \u003cli\u003eNo additional tuning required for installation\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting locations\u003c\/li\u003e\n  \u003cli\u003e(4) 1\/8\" NPT ports for compatible pressure, temperature, or other sensors\u003c\/li\u003e\n  \u003cli\u003eAvailable in natural aluminum or red powder-coated finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonster-Ram Intake Manifold\u003c\/li\u003e\n  \u003cli\u003eBanks High-Flow Coil Heater\u003c\/li\u003e\n  \u003cli\u003eHigh-Flow Billet Intake Plate\u003c\/li\u003e\n  \u003cli\u003eProprietary Replacement Fuel Line\u003c\/li\u003e\n  \u003cli\u003eRequired Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRam 3500 equipped with the 6.7L Cummins diesel engine\u003c\/li\u003e\n  \u003cli\u003eRam 4500 equipped with the 6.7L Cummins diesel engine\u003c\/li\u003e\n  \u003cli\u003eRam 5500 equipped with the 6.7L Cummins diesel engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory MAP sensor is mounted to the intake elbow and must be transferred to the Banks Monster-Ram during installation. Replacement of a functioning MAP sensor is not required, but the sensor should be inspected for soot buildup while removed. Clean or replace the sensor as necessary to help maintain accurate pressure and temperature readings.\u003c\/p\u003e","brand":"Banks Power","offers":[{"title":"Natural","offer_id":53950514069787,"sku":"42805-N","price":868.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":53950514102555,"sku":"42805-R","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-09-15at12.14.39PM.png?v=1789672948","url":"https:\/\/wwmperformance.com\/products\/banks-power-monster-ram-intake-heater-grid-upgrade-natural-red-42805-2019-2024-6-7l-cummins-cab-chassis","provider":"WWM Performance","version":"1.0","type":"link"}