{"title":"2017-2019 6.7L Powerstroke","description":"","products":[{"product_id":"s-and-b-filters-cold-air-intake-2017-2019-ford-powerstroke-6-7l","title":"S\u0026B Cold Air Intake 75-5085-1 | 2017-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eMaximum Performance:\u003c\/strong\u003e The cold air intake for the 2017–2019 Ford Powerstroke 6.7L is engineered to minimize air restriction and flows 57.30% better than stock. A fully enclosed airbox protects the filter from dirt while keeping engine heat out of the intake system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSnap-In Lid Design:\u003c\/strong\u003e The snap-in lid requires no screws, making installation and inspection quick and easy. It creates a secure seal to keep out engine heat and debris. This system includes a large, high-efficiency air filter that boosts performance and safeguards the engine. Filters are available in either 8-layer cotton cleanable or dry extendable media.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLess Restrictive Than Stock:\u003c\/strong\u003e The intake box and battery positions are swapped, moving the intake closer to and directly in line with the front air inlet. The intake tube uses minimal bends for a smoother path to the turbo inlet. These design improvements reduce restriction significantly compared to the stock intake system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNo Check Engine Lights:\u003c\/strong\u003e Designed for proper compatibility with both stock calibration and enhanced tuning. The system uses a properly mapped mass air flow sensor to prevent check engine lights and ensure smooth operation.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Cotton Cleanable","offer_id":51011135144219,"sku":"75-5085-1","price":399.0,"currency_code":"USD","in_stock":true},{"title":"Dry Extendable","offer_id":51011135176987,"sku":"75-5085-1D","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/75-5085-1Iso40144.webp?v=1757363063"},{"product_id":"s-and-b-filters-filter-wrap-kf-1085","title":"S\u0026B Filter Wrap WF-1071 | 2017-2019 Powerstroke 6.7L","description":"","brand":"S\u0026B Filters","offers":[{"title":"Default Title","offer_id":51011135209755,"sku":"WF-1071","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/wf-1071.webp?v=1757363155"},{"product_id":"s-and-s-diesel-cp4-6-7f-bp-g2-1-gen2-1-cp4-disaster-prevention-bypass-kit","title":"S\u0026S DIESEL GEN2.1 CP4 DISASTER PREVENTION BYPASS KIT (DPK) CP4-6.7F-BP-G2.1 | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eProtect the fuel system in your Ford 6.7L Powerstroke from potential CP4 pump failure with the S\u0026amp;S Diesel Gen2.1 CP4 Disaster Prevention Bypass Kit (CP4-6.7F-BPG2.1). Developed by S\u0026amp;S Diesel Motorsport®, the original creator of the Disaster Prevention Kit, this improved second-generation version builds on years of engineering experience to deliver even greater reliability and protection.\u003c\/p\u003e\n\u003cp\u003eThe Gen2.1 kit uses OE-style quick connect lines, eliminating the need for cutting the factory supply line or using compression fittings—both of which can introduce debris or leaks. Threaded joints have also been eliminated, further reducing potential leak points and debris risks during installation. This design ensures a cleaner and more reliable installation process.\u003c\/p\u003e\n\u003cp\u003eThe main function of the bypass kit is to independently supply the CP4 case and metering unit\/plungers with clean, filtered fuel while rerouting case fuel back to the tank. The Gen2.1 kit improves on this design by splitting the fuel supply 25 inches away from the CP4, virtually eliminating the chance of contaminated case fuel feeding back into the clean line. It also incorporates a billet return filter head that accepts a standard spin-on fuel filter, preventing CP4 debris from reaching the tank, lines, and supply pump. This eliminates the need for dropping the fuel tank after a CP4 failure—something that was still required with the original bypass kit.\u003c\/p\u003e\n\u003cp\u003eThanks to efficient design and material use, these improvements come without a significant cost increase. The Gen2.1 kit fits all 2011 and newer Ford Super Duty F250\/F350\/F450\/F550 trucks with the 6.7L Powerstroke, removing the need to select by model year.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Made in the USA, validated in real-world testing, improves CP4 output past 3,000 RPM, OE-style quick connects for easy installation, one part number fits all 2011+ model years, safeguards injectors, rails, lines, and tank from debris, billet filter head accepts standard spin-on filters, includes Donaldson P550943 fuel filter (9-micron at 99% efficiency), and can extend truck range in the event of a CP4 failure.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Default Title","offer_id":51011136848155,"sku":"CP4-6.7F-BP-G2.1","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Cp4-6.7F-BP-G2.1-2025.jpg?v=1757363355"},{"product_id":"s-and-s-diesel-cp4-to-dcr-fuel-pump-conversion-kit","title":"S\u0026S DIESEL CP4 TO DCR FUEL PUMP CONVERSION KIT 6.7F-DCR-1 | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eUpgrade the reliability of your Ford 6.7L Powerstroke with the S\u0026amp;S Diesel CP4 to DCR fuel pump conversion kit (6.7F-DCR-1). The CP4 pump has a history of sudden failure, often leading to complete power loss and costly high-pressure fuel system damage exceeding $10,000. With recalls and lawsuits surrounding the CP4.2, replacing it is the best way to protect the engine and fuel system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Drop-In Solution:\u003c\/strong\u003e Developed by S\u0026amp;S Diesel Motorsport® in partnership with PurePower, this kit replaces the CP4 with a proven Stanadyne DCR high-pressure fuel pump. Specifically engineered for the 6.7 Powerstroke, the DCR pump matches the CP4 output curve and requires no ECU recalibration. The kit uses OE-grade braided hose and steel fuel lines for a factory-fit appearance and dependable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable DCR High-Pressure Fuel Pump:\u003c\/strong\u003e The two-piston DCR pump features a compact, modular design for seamless integration. It offers low hydraulic and acoustical noise, ultra-fast response times, and compatibility with biofuel and low-lubricity fuels. Its patented eccentric drive pumping technology, paired with a pressure-lubricated cam and bushings, delivers exceptional durability and efficiency. The corrosion-resistant fuel control actuator (FCA) prevents debris intrusion, ensuring long service life in harsh conditions. With a maximum fuel delivery of 1,250 mm³ per revolution—25% more than the CP4.2—the DCR pump provides ample flow, even for worn injectors with high return rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtect Productivity:\u003c\/strong\u003e By replacing the CP4 with the DCR pump, Ford Super Duty owners can avoid repair costs ranging from $10,000 to $15,000 while gaining peace of mind that their workhorse will stay reliable on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e OE fit and function, corrosion-resistant FCA, low noise operation, eccentric drive pumping technology, pressure-lubricated cam and bushings, no ECU calibration required, biofuel and low-lubricity fuel compatibility, two-piston DCR pump manufactured by Stanadyne, 1,250 mm³\/rev displacement (+25% over CP4.2), and a durable plug-and-play replacement for the CP4.2 injection pump. Compatible with Ford F250, F350, F450, F550, F650, and F750 trucks equipped with the 6.7L Powerstroke.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes:\u003c\/strong\u003e For 2011–2016 models, the vacuum pump gasket is one-time use and must be replaced. It is recommended to add this gasket to the order for a complete installation. Most other gaskets and seals can be reused if undamaged, but the MAHLE GS33697 fuel injection pump mounting gasket kit is available for those who prefer new gaskets and includes the required vacuum pump gasket.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Default Title","offer_id":51011136880923,"sku":"6.7F-DCR-1","price":2400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6.7F-DCR-Line-Update-25.jpg?v=1757363575"},{"product_id":"spe-motorsport-2011-2024-6-7l-powerstroke-coolant-hose-reroute-kit","title":"SPE Motorsport Coolant Hose Reroute Kit SPE-S100163 | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eThe SPE Motorsport coolant hose reroute kit is engineered to replace and eliminate the factory heater coolant inlet tube and degas return hoses on 2011–2024 Ford 6.7L Powerstroke engines. Factory hoses often detract from the appearance of aftermarket upgrades such as intake piping and turbo kits. This kit provides a streamlined solution that follows the curvature of the engine, offering a clean, aesthetically pleasing look under the hood while improving durability and reliability.\u003c\/p\u003e\n\n\u003cp\u003eConstructed with 5-ply polyester-reinforced silicone capable of withstanding high temperatures and pressures, the kit also includes an anodized billet aluminum heater inlet fitting and factory-style quick connects. The long, continuous silicone lines eliminate the need for T-fittings or barbs, reducing potential leak points. As a plug-and-play system, it requires no cutting or adapting to factory lines, making installation straightforward and hassle-free.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e Simple, clean installation; designed to complement aftermarket engine bay upgrades; form-fitted specifically for the 6.7L Powerstroke; 5-ply reinforced silicone hoses for strength and longevity; billet aluminum heater inlet fitting; continuous hoses with no T-fittings or barbs; plug-and-play fitment; and improved durability over factory rubber hoses.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Billet aluminum heater inlet adapter, two 5-ply polyester reinforced silicone hoses, two 90° quick connect hose ends, four hose clamps, and O-ring with mounting hardware.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"Default Title","offer_id":51011136913691,"sku":"SPE-S100163","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/4_2000x_1907da6d-dab8-4cd0-b9a9-51993a66f06e.webp?v=1757363849"},{"product_id":"spe-motorsport-2011-2022-6-7l-powerstroke-injector-return-repair-kit","title":"SPE Motorsport Injector Return Repair Kit SPE-S100155 | 2011-2022 Powerstroke 6.7L","description":"\u003cp\u003eThe SPE Motorsport injector return repair kit is designed as a permanent upgrade for the brittle, failure-prone factory return line nipple on 2011–2022 Ford 6.7L Powerstroke engines. The OEM nipple is a known weak point due to its size and location near the upper fuel filter, where it can easily break during service or while under pressure. A failure results in fuel spraying under the hood, creating a fire hazard and leaving the truck inoperable until repaired.\u003c\/p\u003e\n\n\u003cp\u003eThis repair kit replaces the fragile plastic components with a billet aluminum, black anodized design that is built to last. For 2011–2016 Powerstroke models, the kit includes an injector return manifold with a reference port for diagnostic use, such as fuel pressure readings or a fuel pressure gauge. For 2017–2022 Powerstroke models, the kit provides a simplified return body with custom-designed nylon retainer inserts and O-rings to maintain a factory-style connection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e Simple, do-it-yourself installation; billet aluminum black anodized construction; diagnostic reference port included for 2011–2016 models; durable design that outlasts factory plastic; compact and clean appearance; compatible with all 6.7L Powerstroke generations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Injector return manifold (2011–2016 only), injector return body, quick connect fitting (2011–2016 only), NPT plug (2011–2016 only), pre-installed nylon retainer insert, pre-installed O-rings, and fuel injection clamp.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"11-16","offer_id":51188351369499,"sku":"SPE-S100155","price":69.0,"currency_code":"USD","in_stock":true},{"title":"17-22","offer_id":51505841799451,"sku":"SPE-S100156","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/1_2000x_b11c930c-bde0-4037-bd12-3e96ba88f0dd.webp?v=1757364009"},{"product_id":"spe-6-7l-powerstroke-low-temp-high-flow-thermostat","title":"SPE Low Temp, High Flow Thermostat SPE-S100119 | 2017–2019 Powerstroke 6.7L","description":"\u003cp\u003eHigh fluid temperatures are a common issue on 6.7L Powerstroke trucks, especially under load or during towing. The SPE low temp, high flow thermostat provides a simple, engineered solution that effectively reduces coolant, oil, and transmission temperatures (on 2017–2019 models).\u003c\/p\u003e\n\n\u003cp\u003eThe factory thermostat opens at 194\/201°F, while the SPE thermostat opens earlier at 175\/180°F. This 19–21 degree difference delivers noticeable improvements, with temperature drops of up to 30°F observed during operation. Extensive testing and development have resulted in a cost-effective and reliable upgrade for Powerstroke owners seeking better thermal management.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e Quick 15-minute installation, thermostat opens at 175\/180°F, reduces fluid temperatures by up to 30°F, lowers coolant temperatures, lowers oil temperatures, and lowers transmission temperatures on 2017–2019 models.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"Default Title","offer_id":51011137011995,"sku":"SPE-S100119","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/4_2000x_266a625b-30f3-49d0-adee-2dc6059d786c.webp?v=1757364097"},{"product_id":"spe-motorsport-6-7l-powerstroke-ccv-reroute-kit","title":"SPE Motorsport CCV Reroute Kit SPE-S100379 | 2011–2024 Powerstroke 6.7L","description":"\u003cp\u003eThe SPE CCV reroute kit is designed to prevent oil vapors from re-entering the intake system on 2011–2024 Ford 6.7L Powerstroke engines. By venting crankcase blow-by externally, this kit reduces the buildup of oil deposits that can cause valve gumming, intake sludge, and reduced engine performance. The venturi-style design eliminates the need for restrictive baffles and captures oil at the base of the nipple before it enters the hose, resulting in virtually no oil loss and no puddling under the truck.\u003c\/p\u003e\n\n\u003cp\u003eUnlike the OEM crankcase vent system, which recirculates gases back into the intake due to emissions standards, this kit provides a cleaner solution that improves engine longevity. The included ¾” 100% silicone reinforced hose is specifically designed for oil applications and offers a larger diameter than competing kits. Its streamlined routing over the brake booster ensures optimal pressure flow with no sharp angles, reducing the risk of oil dripping or restrictions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e Vents crankcase blow-by to reduce oil deposits, prevents boot soak and intake gumming, eliminates the factory crankcase box to free up space, venturi-style design for unrestricted flow, virtually no oil loss, streamlined routing with no sharp angles, and includes a durable ¾” silicone reinforced hose. Available in raw or black anodized finishes for enhanced durability.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"Raw","offer_id":52195403923739,"sku":"SPE-S100379","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":52195403956507,"sku":"SPE-S100193","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_1281_2000x_48c05858-a0b0-4a3c-bad2-84d55e392e37.webp?v=1757364204"},{"product_id":"hot-side-intercooler-pipe-2016-2024-ford-powerstroke-6-7l","title":"S\u0026B Hot Side Intercooler Pipe 83-2004 | 2016-2026 Powerstroke 6.7L","description":"\u003cp\u003eThe S\u0026amp;B Filters 83-2004 hot-side intercooler pipe is designed to improve airflow into the engine of Ford pickup applications. This two-piece charge air pipe kit includes aramid-reinforced silicone hoses and heavy-duty clamps for reliable, long-term performance. The 4-ply silicone hose features an oil-resistant FKM liner, ensuring durability and longevity compared to factory components. Installation is straightforward with included spring-loaded T-bolt clamps featuring a 3\/4\" stainless-steel band and bridge for added strength.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaximized Performance:\u003c\/strong\u003e The S\u0026amp;B hot-side intercooler pipe replaces the weak factory pipe known for boost leaks and failures, delivering improved reliability and airflow.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLess Restriction \u0026amp; More Airflow:\u003c\/strong\u003e Featuring a 3.0\" diameter polished aluminum CAC pipe, this unit is 40% larger than stock, offering reduced restriction and enhanced airflow for better overall performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBetter, Stronger Material:\u003c\/strong\u003e The 4-ply aramid-reinforced silicone coupler with FKM lining is stronger and more resilient than the factory hose. Paired with heavy-duty spring-loaded T-bolt clamps, this kit is engineered for long-lasting durability under boost.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e TIG-welded upper coupler, oil-resistant FKM lining, 4-ply aramid-reinforced silicone hose, and 3\" diameter polished aluminum CAC intercooler pipe.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Default Title","offer_id":51011137110299,"sku":"83-2004","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/83-2004Iso40140.webp?v=1757364486"},{"product_id":"fleece-fuel-filter-bypass-fpe-fmc-ffb-1124","title":"FLEECE FUEL FILTER BYPASS FPE-FMC-FFB-1124 | 2011-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe Fleece FPE-FMC-FFB-1124 fuel filter bypass is designed to simplify and clean up the engine bay of Ford 6.7L Powerstroke trucks. Ideal for applications using an aftermarket lift pump or auxiliary fuel filtration system, this bypass provides a direct-fit solution to eliminate the factory under-hood filter, which is prone to cracking. Installation is straightforward, requiring no cutting, splicing, or modification of the factory fuel lines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Quick-disconnect fittings, drop-in replacement for the factory under-hood filter, heavy-duty anodized billet aluminum construction, and no need to cut or modify lines. Shipping restrictions apply; not available in California.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Compatible with 2011–2024 Ford F250, F350, F450, and F550 trucks equipped with the 6.7L Powerstroke. 2011–2016 models use one inlet and one outlet fitting. 2017–2024 models require an additional quick-disconnect fitting (included) for the fuel return line.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product eliminates the OEM under-hood filtration and must be used only with auxiliary fuel filtration systems that meet or exceed the factory’s fuel filtration specifications.\u003c\/p\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51011137339675,"sku":"FPE-FMC-FFB-1124","price":148.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/fpe-fmc-ffb-1124-k1.png?v=1757364724"},{"product_id":"xdp-hd-intercooler-pipe-billet-adapter-xd364","title":"XDP HD Intercooler Pipe W\/Billet Adapter XD364 | 2017-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe XDP HD intercooler pipe with billet adapter XD364 is a reliable upgrade for 2017–2024 Ford 6.7L Powerstroke trucks. The factory intercooler pipe, constructed from plastic and rubber, is prone to failure under heavy load and towing conditions. When it fails, it often does so while hauling, leaving the truck stranded. The XD364 eliminates this risk by replacing the weak factory pipe with a heavy-duty, long-lasting solution.\u003c\/p\u003e\n\u003cp\u003eThis upgrade features a 3\" mandrel-bent, bead-rolled steel pipe for maximum durability and flow. Reinforced silicone couplers and heavy-duty T-bolt clamps provide secure, leak-free connections. The included billet aluminum adapter is CNC-machined and black anodized, designed to snap into the OEM location for a simple, bolt-on installation. No tuning or modifications are required, and an O-ring (XD459) is included to complete the install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Increased reliability, 3\" mandrel-bent construction, reinforced silicone couplers, heavy-duty T-bolt clamps, black anodized CNC-machined billet adapter, includes XDP intercooler adapter O-ring seal (XD459), direct-fit installation, no tuning required, and backed by a 2-year\/unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Shipping restrictions apply; not available in California.\u003c\/p\u003e","brand":"Xtreme Diesel Performance","offers":[{"title":"Default Title","offer_id":51011137405211,"sku":"XD364","price":293.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at2.54.45PM.png?v=1757364929"},{"product_id":"synergy-8612-24-caster-sleeves","title":"Synergy Caster Sleeves  8612-24 | 2005-2023 Powerstroke 6.0L, 6.7L","description":"\u003cp\u003eThe Synergy 8612-24 caster sleeves are designed to improve suspension geometry when lifting or leveling 2005–2023 Ford F-250\/F-350 4WD trucks. Leveling or lifting can cause factory caster settings to decrease, which affects steering feel and return-to-center. These sleeves correct the issue by restoring caster to factory specifications, helping to minimize steering wander and maintain proper handling characteristics.\u003c\/p\u003e\n\u003cp\u003eEach Dana 60 ball joint sleeve shim provides 2.4 degrees of caster adjustment and -1 to +0.4 degrees of camber adjustment. Made from high-strength 1045 steel and zinc plated for corrosion resistance, the sleeves are durable and maintenance-free. No modifications are required for installation, making this an easy upgrade for leveled or lifted trucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Adds 2.4° of caster, camber adjustable from -1° to +0.4°, helps minimize steering wander, no modifications required, made from high-strength 1045 steel, zinc plated for corrosion protection, maintenance-free design, restores steering return-to-center, and backed by a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e (2) caster sleeves and (2) cotter pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Compatible with 2.5\" leveling kits. Only for use on 4x4 front axles.\u003c\/p\u003e","brand":"Synergy Manufacturing","offers":[{"title":"Default Title","offer_id":51011137437979,"sku":"8612-24","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/8612-24-MAIN-1200.jpg?v=1757365032"},{"product_id":"no-limit-fabrication-universal-venturi","title":"No Limit Fabrication Universal Venturi NLF-Uni-Venturi | 2000-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe No Limit venturi is a universal component designed for use with the No Limit catch can or other custom applications. Built from durable 409 stainless steel, this venturi is engineered for strength and longevity. Welding is required for installation, making it ideal for custom fabrication projects where a reliable and versatile venturi design is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e No Limit venturi, 409 stainless steel construction, compatible with catch can systems or other uses, universal application, welding required, sold individually. \u003cbr\u003e\u003cstrong\u003eSKU:\u003c\/strong\u003e VENTURI\u003c\/p\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51011137470747,"sku":"NLF-Uni-Venturi","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198752126.jpg?v=1757365169"},{"product_id":"no-limit-fabrication-raw-factory-replacement-primary-coolant-tank-67frpctr17","title":"No Limit Fabrication Raw Factory Replacement Primary Coolant Tank 67FRPCTR17 | 2017-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe No Limit Fabrication raw factory replacement primary coolant tank 67FRPCTR17 is a fully TIG-welded aluminum upgrade for 6.7 Powerstroke trucks. Designed as a direct replacement, this tank includes an integrated battery tray so there’s no need to reuse or modify the factory plastic tray. Built from durable aluminum, it improves both under-hood appearance and reliability compared to the OEM plastic tank that is prone to fading and dry rot.\u003c\/p\u003e\n\n\u003cp\u003eThis kit comes complete with a sight tube for easy fluid level checks, a 16 psi OE-style cap, and stainless hardware for installation. With its clean raw aluminum finish, this coolant tank delivers a polished and professional look under the hood while maintaining factory fitment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Direct-fit design, fully TIG welded construction, raw aluminum finish, includes sight tube, 16 psi OE-style cap, and stainless hardware.\u003c\/p\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51011137503515,"sku":"67FRPCTR17","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at3.00.54PM.png?v=1757365289"},{"product_id":"no-limit-fabrication-raw-stage-2-air-to-water-intercooler-67icr172","title":"No Limit Fabrication Raw Stage 2 Air-to-Water Intercooler 67ICR172 | 2017-2026 Powerstroke 6.7L","description":"\u003cp\u003eThe No Limit Fabrication 67ICR172 raw stage 2 air-to-water intercooler is designed to enhance turbocharger performance in Ford 6.7L Powerstroke trucks. Built with a 55% larger core and billet end tanks, this intercooler delivers improved airflow, throttle response, and reliability compared to the factory unit. It can provide up to a 2 PSI boost increase, faster spool-up times, and lower exhaust gas temperatures (EGTs), resulting in better drivability and performance.\u003c\/p\u003e\n\n\u003cp\u003eIndependent testing shows cruising and peak EGT reductions of 50–100 degrees, along with noticeable improvements in throttle response, low-end torque, and overall power. Gains of up to 20 horsepower, 60 ft-lb of torque, and even 1 MPG have been reported. This intercooler is sold as a complete kit for straightforward installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Enhances throttle response, reduces EGTs, decreases spool-up times, increases low-end power and torque, 55% larger core, 31% increase in flow, billet end tanks, and includes a comprehensive kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Shipping restrictions apply. Not available for sale in California.\u003c\/p\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51011137536283,"sku":"67ICR172","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at3.02.38PM.png?v=1757365418"},{"product_id":"xdp-fuel-system-contamination-kit-no-pump-stock-replacement-xd613","title":"XDP Fuel System Contamination Kit – No Pump (Stock Replacement) + DCR\/CP3 Conversion XD613 |  2017–2019 Powerstroke 6.7L","description":"\u003cp\u003eThe XDP fuel system contamination kit – no pump (stock replacement) XD613 is designed to restore proper fuel system function in 2017–2019 Ford 6.7L Powerstroke trucks. The factory CP4 injection pump is a known failure point, and when it fails, it often sends metal fragments throughout the entire system. Contamination affects injectors, rails, lines, and hoses, making replacement of these components the only reliable way to prevent future damage. Simply flushing the system does not ensure complete debris removal.\u003c\/p\u003e\n\u003cp\u003eThis kit provides all the major components required to get the truck back on the road, while allowing you to choose your own high-pressure pump, such as the S\u0026amp;S Diesel 6.7F-DCR CP4 to DCR conversion. Replacing the injectors, lines, and rails ensures that new components are not contaminated by debris from the failed pump, DEF contamination, or water intrusion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Fuel return line\u003c\/li\u003e\n\u003cli\u003e(8) Fuel injector lines\u003c\/li\u003e\n\u003cli\u003e(1) CP4 pump installation kit\u003c\/li\u003e\n\u003cli\u003e(8) Fuel injector hold-down bolts\u003c\/li\u003e\n\u003cli\u003e(2) Genuine Bosch fuel rails with sensors\u003c\/li\u003e\n\u003cli\u003e(8) Genuine Bosch remanufactured fuel injectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Xtreme Diesel Performance","offers":[{"title":"Default Title","offer_id":51011137667355,"sku":"XD613","price":4492.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at3.45.43PM.png?v=1757367950"},{"product_id":"6-7l-ford-powerstroke-injectors-2011-2019","title":"S\u0026S Diesel Motorsport Injector Set 6.7F-SAC-SET | 2011-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S Upgrades:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach S\u0026amp;S injector set is engineered with precision processes to deliver reliable and consistent performance. A proprietary nozzle honing process ensures clean, consistent holes, while nozzles are flow-matched to a 1% variance per set, using OE standards (Viscor SAE-J967 at 40°C, 100 bar). Injectors are flow-matched to within 3% variance per set (except TorqueMaster models) and tested across four different pressure and energizing points per injector. Injection profiles (rate shape) are carefully aligned, and injector build specifications are custom-matched to the nozzle flow rate for each size, including internal modifications such as piezo adjustments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe industry standard for nozzle sizing is based on percentage increases in flow over stock. Available sizes include: TorqueMaster, 30%, 45%, 60%, 80%, 100%, 150%, 200%, 250%, and 300%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCore Policy:\u003c\/strong\u003e Core returns are required. A $150 charge applies if no core is returned after 30 days.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Choose an option","offer_id":51188348977435,"sku":"6.7F-SAC-SET","price":3520.0,"currency_code":"USD","in_stock":true},{"title":"6.7 Ford TorqueMaster injector","offer_id":51503100526875,"sku":"6.7F-10SAC-SET","price":3520.0,"currency_code":"USD","in_stock":true},{"title":"30% over 6.7 Ford injector","offer_id":51503100559643,"sku":"6.7F-30SAC-SET","price":4664.0,"currency_code":"USD","in_stock":true},{"title":"45% over 6.7 Ford injector","offer_id":51503100592411,"sku":"6.7F-45SAC-SET","price":4800.0,"currency_code":"USD","in_stock":true},{"title":"60% over 6.7 Ford injector","offer_id":51503100625179,"sku":"6.7F-60SAC-SET","price":4904.0,"currency_code":"USD","in_stock":true},{"title":"80% over 6.7 Ford injector","offer_id":51503100657947,"sku":"6.7F-80SAC-SET","price":5216.0,"currency_code":"USD","in_stock":true},{"title":"100% over 6.7 Ford injector","offer_id":51503100690715,"sku":"6.7F-100SAC-SET","price":5216.0,"currency_code":"USD","in_stock":true},{"title":"150% over 6.7 Ford injector","offer_id":51503100723483,"sku":"6.7F-150SAC-SET","price":5712.0,"currency_code":"USD","in_stock":true},{"title":"200% over 6.7 Ford injector","offer_id":51503100756251,"sku":"6.7F-200SAC-SET","price":5712.0,"currency_code":"USD","in_stock":true},{"title":"250% over 6.7 Ford injector","offer_id":51503100789019,"sku":"6.7F-250SAC-SET","price":7064.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6.7F-SAC-SET.jpg?v=1757369949"},{"product_id":"2015-2019-ford-6-7-tts-gen2-62-64-ultimate-towmaster","title":"Titan Turbo GEN2 62\/64 Ultimate TowMaster | 2015-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eElevate Your Towing Experience\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titan Turbo Service GEN2 62\/64 UltimateTowmaster Turbo is designed to deliver unmatched towing performance, power, and reliability for Ford 6.7L Powerstroke trucks. Built from a brand-new unit and featuring a custom TTS race cover, this turbocharger is engineered to provide exceptional low-end spool, horsepower, and durability under heavy loads.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e62mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Precision-crafted to improve airflow and horsepower, maximizing towing capability and overall performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Provides exceptional exhaust flow, responsiveness, and strong low-end spool ideal for towing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Ensures enhanced durability and reliability, even under continuous heavy towing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes gaskets for the pedestal (2x) and filter, simplifying the installation process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Towing Power:\u003c\/strong\u003e Rated up to 650 rwhp with supporting modifications and tuning, delivering excellent performance and control on steep grades or with large loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Unit:\u003c\/strong\u003e Designed for straightforward installation in 2017–2019 Ford Powerstroke pickups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty covering manufacturer defects. Requires AMDP tuning for warranty coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2015–2016 Retrofit Compatibility:\u003c\/strong\u003e Includes pedestal retrofit kit with pedestal, bolts, gaskets, and coolant line for proper installation in 2015–2016 trucks. \u003cem\u003e(15–16 trucks add $225)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eElevate Your Towing Experience:\u003c\/strong\u003e The Titan Turbo Service GEN2 62\/64 UltimateTowmaster Turbo delivers exceptional power, low-end spool, and towing reliability, making it the ultimate upgrade for drivers who demand the best.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw \/ 2015-2016","offer_id":51011143794971,"sku":"TTS-1516-6.7-6264UTM","price":2960.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2017-2019","offer_id":51011143827739,"sku":"TTS-1719-6.7-6264UTM","price":2775.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2015-2016","offer_id":51011143860507,"sku":"TTS-1516-6.7-6264UTM-PC","price":3210.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2017-2019","offer_id":51011143893275,"sku":"TTS-1719-6.7-6264UTM-PC","price":3025.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2015-2016","offer_id":51011143926043,"sku":"TTS-1516-6.7-6264UTM-POL","price":3210.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2017-2019","offer_id":51011143958811,"sku":"TTS-1719-6.7-6264UTM-POL","price":3025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_1661_1350x1698_e0347a5d-fa9a-4296-a5c3-f24874e7e1cc.webp?v=1764625881"},{"product_id":"2015-2019-titan-turbo-6-7-gen2-62-67-towmaster","title":"Titan Turbo GEN2 62\/67 TowMaster | 2015-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eElevate Your Towing Power\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUnleash the full towing potential of your 2017–2019 Ford 6.7L Powerstroke with the Titan Turbo Service GEN2 62\/67 Towmaster Turbo. Built from a brand-new unit and featuring a custom TTS race cover, this turbocharger is designed to deliver outstanding towing capability, reliable performance, and a powerful exhaust note.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e62mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Precision-engineered to improve airflow and horsepower, optimized for towing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Provides exceptional responsiveness, low-end torque, and smooth acceleration under heavy loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Built for long-term durability, offering reliable performance in demanding towing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes pedestal gaskets (2x) and filter gasket for secure, hassle-free installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Towing Power:\u003c\/strong\u003e Capable of supporting up to 650 rwhp with supporting modifications and tuning, while maintaining drivability and towing performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Unit:\u003c\/strong\u003e Designed for straightforward installation on 2017–2019 Powerstroke pickups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty covering manufacturer defects. Requires AMDP tuning for warranty eligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2015–2016 Retrofit Compatibility:\u003c\/strong\u003e Includes pedestal retrofit kit (pedestal, bolts, gaskets, coolant line) for installation in 2015–2016 trucks. \u003cem\u003e(15–16 trucks add $225)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaximize Your Towing Potential:\u003c\/strong\u003e The Titan Turbo Service GEN2 62\/67 Towmaster Turbo is the perfect solution for unmatched towing strength, reliability, and sound. Elevate your Ford Powerstroke’s towing performance today.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw \/ 2015-2016","offer_id":51011143991579,"sku":"TTS-1516-6.7-6267TM","price":2960.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2017-2019","offer_id":51011144024347,"sku":"TTS-1719-6.7-6267TM","price":2775.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2015-2016","offer_id":51011144057115,"sku":"TTS-1516-6.7-6267TM-PC","price":3210.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2017-2019","offer_id":51011144089883,"sku":"TTS-1719-6.7-6267TM-PC","price":3025.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2015-2016","offer_id":51011144122651,"sku":"TTS-1516-6.7-6267TM-POL","price":3210.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2017-2019","offer_id":51011144155419,"sku":"TTS-1719-6.7-6267TM-POL","price":3025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_1661_1350x1698_8960a830-466f-4d30-a81d-2b938af0bb50.webp?v=1764626255"},{"product_id":"2015-2019-titan-turbo-6-7-gen2-64-67","title":"Titan Turbo GEN2 64\/67 | 2015-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eUnleash the Power of Your 6.7L Powerstroke\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUnlock unmatched performance with the Titan Turbo Service GEN2 64\/67 Turbo for Ford 6.7L Powerstroke trucks. Built from a brand-new unit and featuring a custom TTS race cover, this turbocharger is engineered to deliver maximum power, durability, and reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e64mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Precision-engineered for increased airflow and horsepower, designed for peak performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Delivers exceptional exhaust flow, quick response, and optimal power output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Provides superior durability and reliability under demanding driving conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Gaskets Included:\u003c\/strong\u003e Comes with pedestal gaskets (2x) and filter gasket for a simplified installation process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Power:\u003c\/strong\u003e Rated for up to 700 rwhp with supporting modifications and tuning, while compatible with stroker pumps for even higher performance potential.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty covering manufacturer defects. Requires AMDP tuning for warranty eligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2015–2016 Retrofit Compatibility:\u003c\/strong\u003e Includes pedestal retrofit kit with pedestal, bolts, gaskets, and coolant line for proper installation in 2015–2016 trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Professional installation and custom tuning are recommended to achieve maximum performance and reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eElevate your 6.7L Powerstroke:\u003c\/strong\u003e The Titan Turbo Service GEN2 64\/67 Turbo is the perfect upgrade for those who demand exceptional horsepower, sound, and reliability.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw \/ 2015-2016","offer_id":51011144188187,"sku":"TTS-1516-6.7-6467","price":3060.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2017-2019","offer_id":51011144220955,"sku":"TTS-1719-6.7-6467","price":2875.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2015-2016","offer_id":51011144253723,"sku":"TTS-1516-6.7-6467-PC","price":3310.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2017-2019","offer_id":51011144286491,"sku":"TTS-1719-6.7-6467-PC","price":3125.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2015-2016","offer_id":51011144319259,"sku":"TTS-1516-6.7-6467-POL","price":3310.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2017-2019","offer_id":51011144352027,"sku":"TTS-1719-6.7-6467-POL","price":3125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_1661_1350x1698_e0347a5d-fa9a-4296-a5c3-f24874e7e1cc.webp?v=1764625881"},{"product_id":"2015-2019-titan-turbo-6-7-gen2-66-67","title":"Titan Turbo GEN2 66\/67 | 2015-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003ePower Beyond Limits\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTake your 2017–2019 Ford 6.7L Powerstroke to uncharted levels of performance with the Titan Turbo Service GEN2 66\/67 Turbo. Built from a brand-new unit and featuring a custom TTS race cover, this turbocharger is engineered to deliver unmatched horsepower, responsiveness, and durability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e66mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Maximizes airflow and horsepower, delivering exceptional performance and reliable power output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Provides fast spool, strong acceleration, and superior responsiveness under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Enhances durability and ensures reliability even under demanding operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes pedestal gaskets (2x) and filter gasket for a straightforward and secure installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Power:\u003c\/strong\u003e Rated up to 750 rwhp with supporting modifications and tuning. Compatible with stroker pumps for even greater power potential.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Covered by a 1-year\/12,000-mile warranty against manufacturer defects. Requires AMDP tuning for warranty eligibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2015–2016 Retrofit Compatibility:\u003c\/strong\u003e Includes pedestal retrofit kit with pedestal, bolts, gaskets, and coolant line for proper installation on 2015–2016 trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eUnleash Your Power:\u003c\/strong\u003e The Titan Turbo Service GEN2 66\/67 Turbo is the ultimate upgrade for achieving maximum horsepower, torque, and reliability in your Ford Powerstroke. Elevate your driving experience today.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw \/ 2015-2016","offer_id":51011144384795,"sku":"TTS-1516-6.7-6667","price":3160.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2017-2019","offer_id":51011144417563,"sku":"TTS-1719-6.7-6667","price":2975.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2015-2016","offer_id":51011144450331,"sku":"TTS-1516-6.7-6667-PC","price":3410.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ 2017-2019","offer_id":51011144483099,"sku":"TTS-1719-6.7-6667-PC","price":3225.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2015-2016","offer_id":51011144515867,"sku":"TTS-1516-6.7-6667-POL","price":3410.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ 2017-2019","offer_id":51011144548635,"sku":"TTS-1719-6.7-6667-POL","price":3225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_1661_1350x1698_e0347a5d-fa9a-4296-a5c3-f24874e7e1cc.webp?v=1764625881"},{"product_id":"2020-present-titan-turbo-6-7-gen2-62-63","title":"Titan Turbo GEN2 62\/63 | 2020-2022 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e62mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Precision-crafted to maximize airflow and horsepower, delivering exceptional towing performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e63mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Provides superior flow and responsiveness with outstanding low-end spool and reliable power output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Ensures long-term durability and reliability, even under heavy towing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Bearing Housing:\u003c\/strong\u003e Retrofitted with a proven journal bearing design, creating a stronger and more robust assembly without compromising performance or reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow Vane Cage:\u003c\/strong\u003e Exclusive custom design for peak low-end spool combined with maximum top-end power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes pedestal gaskets and pedestal-to-block bolts for a secure, hassle-free installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Towing Power:\u003c\/strong\u003e Rated up to 650 rwhp with proper tuning and supporting modifications, making it ideal for trucks that need both power and towing reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Unit:\u003c\/strong\u003e Designed as a direct replacement for 2020–2022 standard output Ford Powerstroke pickups for quick, straightforward installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty covering manufacturer defects for peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eElevate Your Towing Experience:\u003c\/strong\u003e The Titan Turbo Service GEN2 62\/63 Turbo for Ford 6.7L Powerstroke trucks combines towing strength, power, and durability. Perfect for those who demand exceptional reliability and performance.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw \/ Whistle","offer_id":51011144581403,"sku":"TTS-20\/22-6.7-6263-R-W","price":3075.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Non Whistle","offer_id":51874806333723,"sku":"TTS-20\/22-6.7-6263-R-NW","price":3075.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ Whistle","offer_id":51011144646939,"sku":"TTS-20\/22-6.7-6263-POL-W","price":3325.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead) \/ Non Whistle","offer_id":51874806300955,"sku":"TTS-20\/22-6.7-6263-POL-NW","price":3325.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ Whistle","offer_id":51011144614171,"sku":"TTS-20\/22-6.7-6263-PC-W","price":3325.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead) \/ Non Whistle","offer_id":51874806268187,"sku":"TTS-20\/22-6.7-6263-PC-NW","price":3325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/TitanTurboService-394643-Top-Performance-Upgrades-ImageA1_1000x997_73a993e1-1c8d-4a88-bc21-ef501b07ebe1.webp?v=1757518332"},{"product_id":"s-and-b-filters-intake-replacement-filter-kf-1085-kf-1085d","title":"S\u0026B Intake Replacement Filter KF-1085 \u0026 KF-1085D | 2017–2019 Powerstroke 6.7L","description":"\u003cp\u003eThe S\u0026amp;B Filters KF-1085 replacement filter (cleanable) is a direct-fit option for the S\u0026amp;B intake system on 2017–2019 Ford 6.7L Powerstroke trucks. Built with 8-layer oiled cotton media, this filter delivers excellent filtration and long service life while maintaining strong airflow. Both the top and bottom are constructed from durable silicone, which resists breakdown in harsh weather conditions, unlike traditional rubber filters. The smooth transition from the entry radius maximizes surface area, further enhancing airflow and filtration efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Silicone construction, washable and reusable design, and 8-layer oiled cotton filter media for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eQuantity of Oil: 190 grams\u003cbr\u003eType of Media: Oiled (Red)\u003cbr\u003eBase Color: Black\u003cbr\u003eBase OD: 8.25\"\u003cbr\u003eElement Height: 9.75\"\u003cbr\u003eFlange Height: 2.26\"\u003cbr\u003eFlange ID: 4.5\"\u003cbr\u003eTop Color: Black\u003cbr\u003eTop OD: 7.00\"\u003cbr\u003eType of Flange: Snap-in\u003cbr\u003eType of Top: Silicone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This filter is compatible only with intake kits that use a snap-in style lid. For intake kits with a clear lid secured by screws, use part #KF-1063 instead.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Cotton Cleanable","offer_id":51188350157083,"sku":"KF-1085","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Dry Disposable","offer_id":51503244509467,"sku":"KF-1085D","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/KF-1085DIso0360.webp?v=1757519289"},{"product_id":"2015-2019-ford-6-7l-powerstroke-engine-tuning-by-ppei","title":"PPEI Engine Tuning PP-15-19-67P-ET | 2015-2019 Powerstroke 6.7L","description":"\u003ch2\u003ePPEI Engine Calibration for Ford Powerstroke\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCARB EO Pending\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGet ready to experience the ultimate performance boost with \u003cstrong\u003ePPEI's Engine Calibrations\u003c\/strong\u003e for your Ford Powerstroke engine. Designed to enhance every aspect of your vehicle’s performance, PPEI’s tuning improves towing capabilities, throttle response, and fuel efficiency. Expect faster acceleration and a significant increase in horsepower and torque, allowing your Powerstroke to perform better than ever.\u003c\/p\u003e\n\u003cp\u003eWhether you’re towing heavy loads, daily driving, or looking for added power on demand, PPEI’s calibrations deliver smooth, reliable, and efficient performance with gains of up to \u003cstrong\u003e+150 HP over stock\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003ePower Levels\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLevel 1: +15 HP\u003c\/li\u003e\n\u003cli\u003eLevel 2: +35 HP\u003c\/li\u003e\n\u003cli\u003eLevel 3: +65 HP\u003c\/li\u003e\n\u003cli\u003eLevel 4: +100 HP\u003c\/li\u003e\n\u003cli\u003eLevel 5: +150 HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced acceleration and throttle response\u003c\/li\u003e\n\u003cli\u003eImproved towing power and drivability\u003c\/li\u003e\n\u003cli\u003eOptimized fuel efficiency under all load conditions\u003c\/li\u003e\n\u003cli\u003eSmoother power delivery and reduced turbo lag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional Transmission Calibration Upgrade\u003c\/h3\u003e\n\u003cp\u003eFor an additional fee, take your Ford Powerstroke’s transmission to the next level with \u003cstrong\u003ePPEI’s Transmission Calibration\u003c\/strong\u003e. This advanced programming enhances shift strategy for smoother, more precise gear changes, improving drivability and efficiency. Optimized shift points also help reduce transmission wear and enhance towing performance by refining torque converter lockup for better power transfer.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose PPEI?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProven horsepower and torque increases through precision-engineered calibrations\u003c\/li\u003e\n\u003cli\u003eImproved towing capability and overall performance\u003c\/li\u003e\n\u003cli\u003eReduced transmission strain and improved fuel economy\u003c\/li\u003e\n\u003cli\u003eEngineered and tested for reliability and long-term use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231856427291,"sku":"PP-15-19-67P-ET","price":356.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2015-2019Ford6.7LPowerstroke_EngineTuning_800x_8e7bb6bb-3b0d-4e57-9da4-344fdb659fca.webp?v=1764722617"},{"product_id":"2011-2019-ford-6-7l-powerstroke-6r140-transmission-tuning-by-ppei","title":"PPEI Transmission Tuning PP-6R140-TT | 2011-2019 Powerstroke 6.7L 6R140","description":"\u003ch2\u003ePPEI Transmission Calibration\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eExtend your transmission life\u003c\/strong\u003e and \u003cstrong\u003eincrease fuel economy\u003c\/strong\u003e with \u003cstrong\u003ePPEI Transmission Tuning\u003c\/strong\u003e — a must-have upgrade for tuned trucks with added torque and power.\u003c\/p\u003e\n\n\u003cp\u003ePPEI’s transmission tuning completely transforms how your truck drives by optimizing shift points, torque converter lockup, and line pressure — ensuring smoother, stronger, and more efficient operation both on and off the road.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefined Shift Points:\u003c\/strong\u003e Eliminates the low-RPM “lazy” feel that forces unnecessary downshifts, improving responsiveness and fuel economy.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized for Larger Turbos:\u003c\/strong\u003e Keeps your engine in the ideal RPM range to match your upgraded turbo’s torque curve.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorque Converter Lockup Refinement:\u003c\/strong\u003e Delivers power to the ground more efficiently by reducing slip, improving fuel economy, and lowering transmission temperatures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom Fit Calibration:\u003c\/strong\u003e PPEI’s team can tailor your transmission tuning to match your exact driving style and performance needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose PPEI Transmission Tuning?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhances drivability and performance under load or during towing\u003c\/li\u003e\n  \u003cli\u003eReduces heat and wear for a longer transmission lifespan\u003c\/li\u003e\n  \u003cli\u003eMaximizes efficiency for both tuned and stock vehicles\u003c\/li\u003e\n  \u003cli\u003eProvides smoother, smarter shifting for a better driving experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis calibration can be installed using the following supported tuning devices:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003ePPEI RTD\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEZ LYNK AutoAgent\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHP Tuners MPVI2 \/ MPVI3 \/ MPVI4\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eRTD4\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEvery PPEI Transmission Tune is backed by precision engineering and years of testing — ensuring your truck performs stronger, lasts longer, and drives better than ever.\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231856525595,"sku":"PP-6R140-TT","price":284.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2015-2019Ford6.7LPowerstroke_TransTuning_800x_f5ec6336-3a29-4f3e-9641-73859b6400a0.webp?v=1765396726"},{"product_id":"2015-2019-ford-powerstroke-dst-switch","title":"PPEI DST Switch PP-FDST-S | 2015-2019 Powerstroke 6.7L","description":"\u003ch3\u003e2015 - 2019 Ford Powerstroke DST Switch\u003c\/h3\u003e\n\u003cp\u003ePlugs directly into the fuel temperature sensor, allowing seamless switching between power levels while driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e For use with EZ LYNK only.\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231857213723,"sku":"PP-FDST-S","price":54.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/FordDSTSwitch-115750_800x_b1372b82-4036-4bf9-bb53-36c2d1947295.webp?v=1764893584"},{"product_id":"dogbone-head-stud-kit-2011-2023-ford-6-7l-powerstroke","title":"DogBone Head Stud Kit for 2011-2023 Ford 6.7L Powerstroke","description":"\u003ch3\u003eDogBone by UnderDog Diesel – 6.7L Powerstroke Head Stud Kit (2011–2023)\u003c\/h3\u003e\n\u003cp\u003eDogBone Head Studs are engineered to exceed OEM strength and deliver uncompromising durability for high-performance diesel applications. Rated at \u003cstrong\u003e220,000 PSI tensile strength\u003c\/strong\u003e, our in-house testing revealed an \u003cstrong\u003eaverage tensile strength of 228,000 PSI\u003c\/strong\u003e, ensuring superior clamping force and long-term reliability under extreme boost and load conditions.\u003c\/p\u003e\n\u003cp\u003eEach stud is \u003cstrong\u003ethread-rolled after heat treatment\u003c\/strong\u003e, providing a smoother, stronger thread that resists fatigue and ensures optimal performance over time. Every stud also features a \u003cstrong\u003ebroached Allen head\u003c\/strong\u003e for precise and easy installation, guaranteeing accurate height setup and consistent torque.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003e8740 chromoly steel\u003c\/strong\u003e and finished with a \u003cstrong\u003eblack oxide coating\u003c\/strong\u003e for corrosion resistance, DogBone Head Studs are the ideal upgrade for towing, competition builds, or stock engines needing dependable strength and stability.\u003c\/p\u003e\n\u003ch4\u003eVehicle Fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2011–2023 Ford 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision parallel-ground washers\u003c\/li\u003e\n\u003cli\u003e12-point flange nuts\u003c\/li\u003e\n\u003cli\u003eBlack oxide corrosion-resistant finish\u003c\/li\u003e\n\u003cli\u003e220,000+ PSI 8740 chromoly construction\u003c\/li\u003e\n\u003cli\u003eBroached Allen heads for accurate installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStuds\u003c\/li\u003e\n\u003cli\u003eNuts\u003c\/li\u003e\n\u003cli\u003eWashers\u003c\/li\u003e\n\u003cli\u003eInstallation lube\u003c\/li\u003e\n\u003cli\u003eTorque specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DogBone","offers":[{"title":"Default Title","offer_id":51313876664603,"sku":"DogBone-HSK-1123-FORD-6.7L","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198847613.png?v=1762901963"},{"product_id":"ppe-316119515-replacement-up-pipes","title":"PPE 316119515 Replacement Up-Pipes","description":"\u003cp\u003eThe PPE 316119515 High Flow Replacement Up-Pipes are designed as a direct bolt-on upgrade for the factory up-pipes commonly known to crack on Ford trucks. Built from high-grade 304 stainless steel, these up-pipes deliver exceptional strength, corrosion resistance, and long-term reliability even in demanding exhaust environments.\u003c\/p\u003e\n\u003cp\u003eFeaturing a two-inch diameter design, these up-pipes provide a flow path that is 50% larger than stock, allowing exhaust gases to move more freely. This improved flow helps significantly lower exhaust back pressure, promoting more efficient turbo operation and improved overall engine performance.\u003c\/p\u003e\n\u003cp\u003eInternally sleeved bellows are incorporated to add both flexibility and durability, ensuring the up-pipes can handle extreme temperatures and high exhaust pressures without failure. Provisions for the factory EGT (Exhaust Gas Temperature) and EBP (Exhaust Back Pressure) sensors are included, allowing for a simple, factory-style installation.\u003c\/p\u003e\n\u003cp\u003eHigh-quality stainless steel gaskets are included to ensure a proper seal and trouble-free installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes New Stainless Steel Gaskets\u003c\/li\u003e\n\u003cli\u003eConstructed Entirely from 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Installation with OEM Sensor Ports\u003c\/li\u003e\n\u003cli\u003eReduces Exhaust Backpressure by Up to 65%\u003c\/li\u003e\n\u003cli\u003eImproves Turbo Efficiency and Engine Torque\u003c\/li\u003e\n\u003cli\u003e50% Larger Internal Flow Area for Enhanced Exhaust Flow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Default Title","offer_id":51525597593883,"sku":"316119515","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2015-2019-Ford-6.7-Up-pipe-Kit-Pacific-Performance-Engineering-866975.webp?v=1766525691"},{"product_id":"xdp-engine-oil-pan-bolt-kit-black-phosphate-xd622","title":"XDP Engine Oil Pan Bolt Kit (Black-Phosphate) XD622","description":"\u003cp\u003eThe XDP XD622 Engine Oil Pan Bolt Kit is designed to replace worn or damaged fasteners on the steel oil pan of 2011–2024 Ford 6.7L Powerstroke engines. This direct-fit hardware kit provides a reliable solution when factory bolts become rounded or compromised during service.\u003c\/p\u003e\n\u003cp\u003eEach kit includes fifteen Class 10.9 fasteners engineered for strength and longevity. The bolts feature a black phosphate finish that acts as an anti-galling coating while also offering corrosion resistance. With a tensile strength rated at 150,000 PSI, these fasteners are built to handle the demands of diesel engine operation.\u003c\/p\u003e\n\u003cp\u003eAn integrated flange design helps evenly distribute clamping force at the mounting surface, eliminating the need for separate washers and ensuring a secure, consistent seal during installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClass 10.9 High-Strength Fasteners\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement for Factory Oil Pan Bolts\u003c\/li\u003e\n\u003cli\u003eBlack Phosphate Coating for Reduced Galling\u003c\/li\u003e\n\u003cli\u003e150,000 PSI Tensile Strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Xtreme Diesel Performance","offers":[{"title":"Default Title","offer_id":51525597659419,"sku":"XD622","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.38.12PM.png?v=1766525918"},{"product_id":"ppe-heavy-duty-cast-aluminum-engine-oil-pan","title":"PPE Heavy-Duty Cast Aluminum Engine Oil Pan | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eEnhance both cooling performance and appearance on your Ford 6.7L Powerstroke with the PPE Cast Aluminum Engine Oil Pan. Designed as an upgrade over the factory pan, this unit is constructed from high-strength cast aluminum to improve durability while aiding in heat dissipation.\u003c\/p\u003e\n\u003cp\u003eIntegrated external cooling fins help reduce oil temperatures, supporting longer oil life and more consistent engine performance. The increased capacity adds one additional quart of oil, further contributing to improved thermal control during demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003eA stainless steel drain plug equipped with a powerful neodymium magnet is included to capture harmful ferrous particles circulating in the oil. Zinc-plated Allen head mounting hardware is also provided for a clean, secure installation. This oil pan is available in multiple finishes to match your build, including raw, black, and brushed.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-Strength Cast Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eExternal Cooling Fins for Improved Oil Temperature Control\u003c\/li\u003e\n\u003cli\u003eAdds One Quart of Oil Capacity\u003c\/li\u003e\n\u003cli\u003eStainless Steel Magnetic Drain Plug\u003c\/li\u003e\n\u003cli\u003eZinc-Plated Allen Head Mounting Hardware Included\u003c\/li\u003e\n\u003cli\u003eAvailable in Raw, Black, or Brushed Finishes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Raw","offer_id":51525626528027,"sku":"314052100","price":242.99,"currency_code":"USD","in_stock":true},{"title":"Brushed","offer_id":51525626560795,"sku":"314052110","price":260.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51525626593563,"sku":"314052120","price":260.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Heavy-Duty-Cast-Aluminum-OilPan_314052100.webp?v=1766526371"},{"product_id":"mahle-cs54886a-lower-engine-gasket-set","title":"Mahle CS54886A Lower Engine Gasket Set","description":"\u003cp\u003eThe MAHLE CS54886A Lower Engine Gasket Set is designed to provide the necessary gaskets and seals for resealing the lower portion of the engine on 2015–2019 Ford 6.7L Powerstroke applications. This set is well-suited for engine service or repair where maintaining proper sealing is essential.\u003c\/p\u003e\n\u003cp\u003eAll MAHLE gaskets and seals are produced to meet strict manufacturing standards and are engineered to match or exceed original equipment specifications. This ensures consistent fitment, reliable sealing performance, and long-term durability.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Lower Engine Gasket Set\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds Original Equipment Specifications\u003c\/li\u003e\n\u003cli\u003eDesigned for Reliable Sealing and Proper Fit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525597790491,"sku":"CS54886A","price":119.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.50.36PM.png?v=1766526642"},{"product_id":"mahle-vs50658-valve-cover-gasket-set","title":"MAHLE VS50658 Valve Cover Gasket Set","description":"\u003cp\u003e\nRestore proper sealing on your 2011–2020 Ford 6.7L Powerstroke with the MAHLE VS50658 Valve Cover Gasket Set. Designed to replace worn or leaking valve cover gaskets, this kit is manufactured using OE-equivalent materials and built to factory specifications for dependable fit and performance.\n\u003c\/p\u003e\n\u003cp\u003e\nThis valve cover gasket set installs as a direct replacement for the original components and is engineered to maintain stock engine operation. MAHLE’s precision manufacturing ensures reliable sealing and long-term durability in demanding diesel applications.\n\u003c\/p\u003e\n\u003cp\u003e\nIn addition to the valve cover gasket, this comprehensive kit includes a wide range of related seals, gaskets, and hardware to support a thorough and efficient repair.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOE-Quality Construction\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Factory Replacement\u003c\/li\u003e\n\u003cli\u003eMaintains Original Engine Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eValve Cover Gasket\u003c\/li\u003e\n\u003cli\u003eCrankcase Breather Gaskets\u003c\/li\u003e\n\u003cli\u003eEGR Inlet and Outlet Tube Gaskets\u003c\/li\u003e\n\u003cli\u003eEGR Cooler to Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003eFuel Injector Crush Washers\u003c\/li\u003e\n\u003cli\u003eFuel Injector Hold-Down Bolts\u003c\/li\u003e\n\u003cli\u003eFuel Injector O-Rings\u003c\/li\u003e\n\u003cli\u003eFuel Injector Supply Tubes\u003c\/li\u003e\n\u003cli\u003eFuel Injector Valve Cover Seals\u003c\/li\u003e\n\u003cli\u003eHeater Return Tube O-Ring\u003c\/li\u003e\n\u003cli\u003eIntake Manifold Gaskets\u003c\/li\u003e\n\u003cli\u003eLow-Pressure Fuel Line to High-Pressure Fuel Pump O-Rings\u003c\/li\u003e\n\u003cli\u003eOil Filler Tube O-Ring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525597823259,"sku":"VS50658","price":516.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.51.13PM.png?v=1766526678"},{"product_id":"mahle-vs50658sl-valve-cover-gasket-set-left","title":"MAHLE VS50658SL Valve Cover Gasket Set (Left)","description":"\u003cp\u003e\nThe MAHLE VS50658SL Valve Cover Gasket Set is designed to replace the factory sealing components on the left side of 2011–2020 Ford 6.7L Powerstroke engines. This set restores proper sealing where leaks or worn gaskets may be present.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured to match original equipment standards, MAHLE gasket sets deliver the same form, fit, and function as factory-installed components. OE-equivalent or higher-quality materials are used to ensure consistent sealing performance and long service life.\n\u003c\/p\u003e\n\u003cp\u003e\nThis valve cover gasket set installs as a stock-style replacement and is engineered to meet or exceed original equipment specifications. It is a direct-fit solution for the left-side valve cover and cross-references to part number BC3Z-6584-C.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Stock Replacement Valve Cover Gasket Set\u003c\/li\u003e\n\u003cli\u003eDesigned for Left-Side Engine Application\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds OE Specifications\u003c\/li\u003e\n\u003cli\u003eCross-Reference: BC3Z-6584-C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525597856027,"sku":"VS50658SL","price":277.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.51.40PM.png?v=1766526705"},{"product_id":"mahle-vs50658sr-valve-cover-gasket-set-right","title":"MAHLE VS50658SR Valve Cover Gasket Set (Right)","description":"\u003cp\u003e\nThe MAHLE VS50658SR Valve Cover Gasket Set is designed to replace the factory sealing components on the right side of 2011–2020 Ford 6.7L Powerstroke engines. This set provides a reliable solution for addressing leaks caused by worn or damaged valve cover gaskets.\n\u003c\/p\u003e\n\u003cp\u003e\nBuilt to match original equipment standards, MAHLE gasket sets deliver factory-correct fitment, sealing performance, and durability. OE-equivalent or higher-quality materials are used to ensure long-lasting reliability in demanding diesel engine environments.\n\u003c\/p\u003e\n\u003cp\u003e\nThis valve cover gasket set installs as a stock-style replacement and is engineered to meet or exceed original equipment specifications. It is intended for use on the right (passenger) side of the engine.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Stock Replacement Valve Cover Gasket Set\u003c\/li\u003e\n\u003cli\u003eDesigned for Right-Side Engine Application\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds OE Specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525597987099,"sku":"VS50658SR","price":284.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.59.30PM.png?v=1766527175"},{"product_id":"mahle-hs54886a-head-set","title":"Mahle HS54886A Head Set","description":"\u003cp\u003e\nThe MAHLE HS54886A Head Gasket Set is designed to simplify head gasket service on 2015–2019 Ford 6.7L Powerstroke engines. This set includes the essential sealing components needed to properly reseal the cylinder heads during engine repair or maintenance.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured to original equipment standards, MAHLE head sets deliver factory-correct fitment and dependable sealing performance. Each component is produced using OE-equivalent or higher-quality materials to ensure durability and consistent results under demanding diesel operating conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nThis head gasket set has been quality tested and is engineered to meet or exceed OE specifications. Please note that head bolts and the fuel rail supply tube are not included and must be purchased separately if required for your application.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOE-Style Replacement Head Gasket Set\u003c\/li\u003e\n\u003cli\u003eQuality Tested for Reliable Sealing Performance\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds Original Equipment Specifications\u003c\/li\u003e\n\u003cli\u003eDesigned for Proper Fit and Long-Term Durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525598019867,"sku":"HS54886A","price":1062.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.00.08PM.png?v=1766527213"},{"product_id":"no-limit-fabrication-67op-billet-aluminum-deep-oil-pan","title":"No Limit Fabrication 67OP Billet Aluminum Deep Oil Pan With Drain","description":"\u003cp\u003e\nUpgrade the factory oil pan on your Ford 6.7L Powerstroke with the No Limit Fabrication 67OP Billet Aluminum Deep Oil Pan with Drain. Designed to replace the failure-prone plastic OEM pan, this heavy-duty upgrade improves durability, oil capacity, and thermal control.\n\u003c\/p\u003e\n\u003cp\u003e\nMachined from high-quality 6061 billet aluminum, this oversized oil pan helps reduce oil temperatures while significantly increasing strength and reliability. An integrated -12 ORB secondary drain port makes it ideal for compound turbocharger setups, while the included -12 ORB magnetic drain plug helps capture metallic debris circulating in the oil.\n\u003c\/p\u003e\n\u003cp\u003e\nThis deep oil pan increases total oil capacity by three quarts, providing added lubrication and improved temperature stability for demanding driving and performance applications.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision Machined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eImproves Oil Cooling and Overall Reliability\u003c\/li\u003e\n\u003cli\u003e-12 ORB Secondary Drain Port for Compound Turbo Applications\u003c\/li\u003e\n\u003cli\u003eIncludes Magnetic -12 ORB Drain Plug\u003c\/li\u003e\n\u003cli\u003eAdds Three Quarts of Additional Oil Capacity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51525598150939,"sku":"67OP","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.02.47PM.png?v=1766527437"},{"product_id":"wagler-crf671-connecting-rod-set","title":"Wagler CRF6.7.1 Connecting Rod Set","description":"\u003cp\u003eThe Wagler CRF6.7.1 Connecting Rod Set is engineered to strengthen the bottom end of 2016.5–2019 Ford 6.7L Powerstroke engines, with proven capability to support 1,750+ horsepower. Designed for high-horsepower and competition-level builds, these rods provide the durability needed for extreme performance applications.\u003c\/p\u003e\n\u003cp\u003eWagler Competition Products performs all engineering, design, machining, assembly, and quality control in-house to ensure precise fitment and consistency. Each connecting rod is honed to factory specifications and is compatible with OE pistons without the need for additional clearancing.\u003c\/p\u003e\n\u003cp\u003eThis set features an updated H-beam design enhanced with added material thickness, strengthening ribs, and larger radii to reduce stress concentrations. A state-of-the-art dual angled tongue-and-groove design eliminates offset caps while maintaining a true bore. Manufactured in the USA from 4340ACQ certified material, these rods are shot peened for added strength and come balanced to a tight tolerance. ARP L19 3\/8-inch fasteners are included for secure installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRated to Handle 1,750+ Horsepower\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli\u003eForged from 4340ACQ Certified Material\u003c\/li\u003e\n\u003cli\u003eUpdated H-Beam Design with Added Strengthening Ribs\u003c\/li\u003e\n\u003cli\u003eDual Angled Tongue-and-Groove Design for True Bore Retention\u003c\/li\u003e\n\u003cli\u003eStandard Shot Peened Finish\u003c\/li\u003e\n\u003cli\u003eBalanced to ±1 Gram Per Set\u003c\/li\u003e\n\u003cli\u003eIncludes ARP L19 3\/8\"; Fasteners\u003c\/li\u003e\n\u003cli\u003eCompatible with Factory Replacement Bearings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wagler Competition Products","offers":[{"title":"Default Title","offer_id":51525598216475,"sku":"CRF6.7.1","price":4695.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.04.34PM.png?v=1766527490"},{"product_id":"cp-carrillo-ps6716hd6969h-67-powerstroke-pro-h-rods","title":"CP-Carrillo PS6716HD6969H 6.7 Powerstroke Pro-H Connecting Rods (H-11)","description":"\u003cp\u003eThe CP-Carrillo PS6716HD6969H Pro-H Connecting Rod Set is engineered for high-performance engine rebuilds in 2016–2019 Ford 6.7L Powerstroke applications. Designed for strength, consistency, and long-term durability, these connecting rods are built to meet the demands of both street-driven and competition-focused diesel engines.\u003c\/p\u003e\n\u003cp\u003eCP-Carrillo has been a respected name in the performance engine industry since 1963, with components used across a wide range of motorsports and high-horsepower applications. These connecting rods are manufactured from a proprietary alloy blend containing chrome, nickel, molybdenum, and vanadium. The vanadium alloy meets stringent VAR (vacuum arc remelt) ASTM standards, with material properties verified through both supplier validation and independent metallurgical testing.\u003c\/p\u003e\n\u003cp\u003eEach rod begins as an oversized forging to promote optimal grain flow and eliminate potential surface imperfections. Precision CNC machining with in-process probing ensures dimensional accuracy, while multiple inspection stages—including magnaflux testing and Rockwell hardness checks—verify structural integrity and proper heat treatment. A final shot-peening process completes the manufacturing cycle for added fatigue resistance. This set features H-11 tool steel fasteners and is suitable for a wide range of performance applications.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePro-H Connecting Rod Design\u003c\/li\u003e\n\u003cli\u003eSold as a Complete Set of 8\u003c\/li\u003e\n\u003cli\u003eManufactured from Proprietary High-Strength Alloy\u003c\/li\u003e\n\u003cli\u003eOversized Forging for Proper Grain Flow\u003c\/li\u003e\n\u003cli\u003ePrecision CNC Machined and Multi-Stage Inspected\u003c\/li\u003e\n\u003cli\u003eMagnafluxed and Rockwell Tested\u003c\/li\u003e\n\u003cli\u003eFinal Shot-Peened Finish\u003c\/li\u003e\n\u003cli\u003eIncludes H-11 Tool Steel Bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CP-Carrillo","offers":[{"title":"Default Title","offer_id":51525598282011,"sku":"PS6716HD6969H","price":3494.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.05.21PM.png?v=1766527528"},{"product_id":"ppe-318034800-head-stud-kit","title":"PPE 318034800 Head Stud Kit","description":"\u003cp\u003eWhen maximum strength and precision matter, the PPE 318034800 Head Stud Kit is engineered to meet the demands of high-performance diesel engine builds. Designed for builders who expect more than factory hardware can provide, this stud kit delivers superior clamping force, durability, and long-term reliability in both stock and high-output applications.\u003c\/p\u003e\n\u003cp\u003eEach head stud is centerless ground for exceptional dimensional accuracy and thread rolled to Mil-S-8879 specifications. This manufacturing process improves thread strength while reducing stress concentrations, resulting in a fastener that outperforms OEM hardware. Independent testing has verified a tensile strength exceeding 231,900 PSI, making these studs well-suited for engines subjected to increased cylinder pressure.\u003c\/p\u003e\n\u003cp\u003eThe kit includes all necessary installation components, such as hardened parallel washers, nuts, and a specially formulated assembly lubricant to promote even load distribution and accurate torque readings. For best results, properly cleaned threads are critical during installation. XDP thread cleaning chasers are recommended to help ensure accurate torque values and long-term engine reliability.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from High-Strength Chromoly Alloy Steel\u003c\/li\u003e\n\u003cli\u003eTensile Strength Rated at Over 230,000 PSI\u003c\/li\u003e\n\u003cli\u003eSuitable for High-Performance and Stock Engine Applications\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Finish for Corrosion Resistance\u003c\/li\u003e\n\u003cli\u003ePrecision Thread Rolled for Reduced Stress and Increased Durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Default Title","offer_id":51525598413083,"sku":"318034800","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.11.05PM.png?v=1766527889"},{"product_id":"mahle-hs54887a-cylinder-head-gasket-set","title":"MAHLE HS54887A Cylinder Head Gasket Set","description":"\u003cp\u003e\nThe MAHLE HS54887A Cylinder Head Gasket Set is designed to support top-end engine rebuilds by providing dependable sealing components built to OEM standards. This head set is ideal for restoring proper engine sealing during repair or overhaul without compromising long-term reliability.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured to strict original equipment tolerances, MAHLE gasket sets are produced using high-quality materials engineered for durability and consistent performance. Each component is designed to fit precisely, ensuring proper sealing and dependable operation throughout the service life of the engine.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from High-Quality Materials\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement for Factory Components\u003c\/li\u003e\n\u003cli\u003eBuilt to Meet OEM Specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525598445851,"sku":"HS54887A","price":692.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.11.54PM.png?v=1766527923"},{"product_id":"bd-diesel-exhaust-manifold-kit-gaskets-studs-1043008","title":"BD Diesel Exhaust Manifold Kit With Gaskets \u0026 Studs 1043008","description":"\u003cp\u003eResolve common exhaust manifold failures on the Ford 6.7L Powerstroke with the BD Diesel Exhaust Manifold Kit with Gaskets \u0026amp; Studs, part number 1043008. Engineered for improved durability and long-term reliability, this manifold set is designed to withstand the extreme heat conditions that often cause factory manifolds to crack or warp.\u003c\/p\u003e\n\u003cp\u003eEach manifold is cast from high-silicon ductile iron with a 0.275-inch thick wall construction, resulting in walls that are approximately 75% thicker than stock. This added material strength helps retain heat, reduce warping, and improve overall thermal stability. Machined, reinforced mounting flanges further enhance sealing strength and durability.\u003c\/p\u003e\n\u003cp\u003eTo improve thermal expansion control, this kit includes longer exhaust studs and thick spacers finished with a black oxide coating. Gasket-matched exhaust ports help promote smooth exhaust flow, while a high-temperature POR-15 black coating provides corrosion resistance. The system is fully compatible with factory EGR components and includes all required gaskets, studs, spacers, and an M8 stud installation tool for a complete installation solution.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-Silicon Ductile Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eApproximately 75% Thicker Walls Than Stock\u003c\/li\u003e\n\u003cli\u003eGasket-Matched Exhaust Ports\u003c\/li\u003e\n\u003cli\u003eMachined, Reinforced Mounting Flanges\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature POR-15 Black Coating\u003c\/li\u003e\n\u003cli\u003eLonger Exhaust Studs for Improved Thermal Durability\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Coated Thick Spacers\u003c\/li\u003e\n\u003cli\u003eDesigned Using Computational Fluid Dynamics\u003c\/li\u003e\n\u003cli\u003eIncludes Exhaust Manifold, Crossover Tube, and EGR Port Gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes Long Stud and Spacer Kit for All 8 Cylinders\u003c\/li\u003e\n\u003cli\u003eIncludes M8 Stud Installation Tool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51525598511387,"sku":"1043008","price":541.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.13.13PM.png?v=1766528012"},{"product_id":"bd-diesel-right-side-exhaust-manifold-kit-1043009","title":"BD Diesel Right Side Exhaust Manifold Kit With Gaskets \u0026 Studs 1043009","description":"\u003cp\u003eRestore durability and reliability to your exhaust system by replacing the factory manifold with the BD Diesel Right Side Exhaust Manifold, part number 1043009. Designed for 2015–2019 Ford 6.7L Powerstroke pickups and 2017–2019 cab \u0026amp; chassis applications, this manifold addresses one of the most common failure points on the 6.7L platform.\u003c\/p\u003e\n\u003cp\u003eConstructed from high-silicon ductile cast iron with a heavy-duty 0.275-inch thick wall design, this manifold is approximately 75% thicker than the factory unit. The added material strength helps resist cracking, retain heat, and prevent warping under extreme exhaust temperatures. Reinforced, machined mounting flanges further improve sealing and long-term durability.\u003c\/p\u003e\n\u003cp\u003eThermal performance is enhanced through the use of longer exhaust studs and thick spacers that better manage expansion during heat cycles. The manifold features gasket-matched exhaust ports for improved flow and is fully compatible with factory EGR components. Finished with a high-temperature POR-15 black coating, this kit includes all necessary gaskets, studs, spacers, and an M8 stud installation tool for a complete passenger-side replacement.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight (Passenger) Side Exhaust Manifold\u003c\/li\u003e\n\u003cli\u003eHigh-Silicon Ductile Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eApproximately 75% Thicker Walls to Reduce Warping\u003c\/li\u003e\n\u003cli\u003eMachined, Reinforced Mounting Flanges\u003c\/li\u003e\n\u003cli\u003eGasket-Matched Exhaust Ports\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature POR-15 Black Coating\u003c\/li\u003e\n\u003cli\u003eLonger Exhaust Studs for Improved Thermal Durability\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Coated Thick Spacers\u003c\/li\u003e\n\u003cli\u003eDesigned Using Computational Fluid Dynamics\u003c\/li\u003e\n\u003cli\u003eIncludes Exhaust Manifold, Crossover Tube, and EGR Port Gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes Long Stud and Spacer Kit for All 8 Cylinders\u003c\/li\u003e\n\u003cli\u003eM8 Stud Installation Tool Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51525598544155,"sku":"1043009","price":310.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.14.25PM.png?v=1766528073"},{"product_id":"bd-diesel-left-side-exhaust-manifold-kit-1043006","title":"BD Diesel Left Side Manifold With Gaskets \u0026 Studs 1043006","description":"\u003cp\u003eEliminate a common failure point on the Ford 6.7L Powerstroke by replacing the factory exhaust manifold with the BD Diesel Driver Side Exhaust Manifold, part number 1043006. Engineered as a heavy-duty upgrade, this manifold is designed to withstand extreme exhaust temperatures that often lead to cracking and warping in OEM components.\u003c\/p\u003e\n\u003cp\u003eThe manifold is cast from high-silicon ductile iron using a robust 0.275-inch thick wall design, making it approximately 75% thicker than the factory unit. This increased material thickness improves heat retention, resists deformation, and enhances long-term durability. Reinforced, machined mounting flanges further strengthen the sealing surface for dependable performance.\u003c\/p\u003e\n\u003cp\u003eThermal durability is improved through the use of longer exhaust studs and thick spacers that better manage expansion during heat cycles. Gasket-matched exhaust ports help maintain smooth exhaust flow, and the manifold is fully compatible with factory EGR systems. Finished with a high-temperature POR-15 black coating, this kit includes the left (driver side) manifold, studs, spacers, and required gaskets for a complete installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft (Driver Side) Exhaust Manifold\u003c\/li\u003e\n\u003cli\u003eHigh-Silicon Ductile Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eApproximately 75% Thicker Walls to Prevent Warping\u003c\/li\u003e\n\u003cli\u003eGasket-Matched Exhaust Ports\u003c\/li\u003e\n\u003cli\u003eMachined, Reinforced Mounting Flanges\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature POR-15 Black Coating\u003c\/li\u003e\n\u003cli\u003eLonger Exhaust Studs for Improved Thermal Durability\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Coated Thick Spacers\u003c\/li\u003e\n\u003cli\u003eDesigned Using Computational Fluid Dynamics\u003c\/li\u003e\n\u003cli\u003eIncludes Exhaust Manifold and Crossover Tube Gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes Long Stud and Spacer Kit for All 8 Cylinders\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51525598576923,"sku":"1043006","price":351.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.14.52PM.png?v=1766528104"},{"product_id":"mahle-gs33703-fuel-injector-seal-kit","title":"MAHLE GS33703 Fuel Injector Seal Kit","description":"\u003cp\u003e\nThe MAHLE GS33703 Fuel Injector Seal Kit provides the essential sealing components needed to service four fuel injectors on Ford 6.7L Powerstroke engines. This kit is designed for injector maintenance or replacement where proper sealing is critical to engine performance and reliability.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured to original equipment standards, MAHLE OE gaskets and seals deliver factory-correct fitment, finish, and sealing performance. Each seal is produced using high-quality materials engineered to meet or exceed the durability of the original components, making MAHLE a trusted choice among professional technicians and engine builders.\n\u003c\/p\u003e\n\u003cp\u003e\nThis kit services four injectors; two kits are required to complete a full engine.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Injector Seal Kit\u003c\/li\u003e\n\u003cli\u003eServices (4) Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eOE-Quality Fit, Finish, and Performance\u003c\/li\u003e\n\u003cli\u003eTwo Kits Required Per Engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525598707995,"sku":"GS33703","price":238.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.18.12PM.png?v=1766528296"},{"product_id":"fleece-billet-under-hood-fuel-filter-assembly-uhfa-1123","title":"Fleece Billet Under Hood Fuel Filter Assembly FPE-FMC-UHFA-1123 | 2011-2025 6.7L Powerstroke","description":"\u003cp\u003e\nUpgrade the factory under-hood fuel filter on your Ford 6.7L Powerstroke with the Fleece Billet Under Hood Fuel Filter Assembly (FPE-FMC-UHFA-1123). Designed to replace the failure-prone plastic OE filter housing, this assembly eliminates the risk of cracking and fuel leaks while improving durability and serviceability.\n\u003c\/p\u003e\n\u003cp\u003e\nThis drop-in replacement installs directly into the factory filter location and features a heavy-duty anodized billet aluminum cap along with billet aluminum quick-disconnect fittings. A replaceable spin-on Donaldson fuel filter is used in place of the OEM plastic unit, making routine maintenance quick and straightforward.\n\u003c\/p\u003e\n\u003cp\u003e\nTo extend service intervals even further, the kit includes an additional Donaldson fuel filter. A steel adapter fitting is also included to ensure a secure, reliable connection. This billet filter assembly is an ideal upgrade for trucks running performance fuel system components where reliability is critical.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrop-In Replacement for Factory Under-Hood Fuel Filter\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Anodized Billet Aluminum Filter Cap\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Quick-Disconnect Fittings\u003c\/li\u003e\n\u003cli\u003eSteel Adapter Fitting for Secure Filter Mounting\u003c\/li\u003e\n\u003cli\u003eIncludes Extra Donaldson Fuel Filter (9 Micron @ 99% Efficiency)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Notes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces under-hood factory filters found in Motorcraft kits FD-4615 and FD-4625AA\u003c\/li\u003e\n\u003cli\u003eFits 2011–2024 Ford 6.7L Powerstroke equipped with S\u0026amp;S Diesel Motorsport DCR or CP4 Disaster Prevention kits\u003c\/li\u003e\n\u003cli\u003e2011–2016 models use one inlet and one outlet fitting\u003c\/li\u003e\n\u003cli\u003e2017–2024 models include an additional quick-disconnect fitting for fuel return\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFleece Performance Billet Filter Cap and Adapter Components\u003c\/li\u003e\n\u003cli\u003eDonaldson Spin-On Fuel Filter\u003c\/li\u003e\n\u003cli\u003eAdditional Donaldson Replacement Fuel Filter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51525598904603,"sku":"FPE-FMC-UHFA-1123","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.25.35PM.png?v=1766528792"},{"product_id":"fleece-water-in-fuel-sensor-pigtail","title":"Fleece Water In Fuel (WIF) Sensor Pigtail","description":"\u003cp\u003e\nThe Fleece Performance Water-In-Fuel (WIF) Sensor Pigtail (FPE-HAR-FMC-WIF-PT-1116) is a direct replacement wiring harness designed specifically for the Water-In‐Fuel sensor on 2011-2019 Ford 6.7L Powerstroke trucks. This pigtail provides a reliable and secure electrical connection to ensure accurate sensor readings and long-term performance.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured in-house by Fleece Performance Engineering, this replacement harness features precision wire cutting and terminal crimping to ensure durability and dependable operation in harsh engine bay conditions. The kit includes heat-sealable butt-splice connectors for a secure installation and a 6-inch pigtail length for easy routing and connection to the factory sensor and engine wiring.\n\u003c\/p\u003e\n\u003cp\u003e\nThis replacement pigtail is an ideal service part for trucks experiencing WIF sensor electrical issues due to broken, corroded, or damaged factory wiring, helping restore proper fuel system diagnostics and warning functions.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement Water-In-Fuel (WIF) Sensor Wiring Pigtail\u003c\/li\u003e\n\u003cli\u003eDesigned for 2011–2019 6.7L Powerstroke Vehicles\u003c\/li\u003e\n\u003cli\u003e6-Inch Pigtail Length for Easy Fitment\u003c\/li\u003e\n\u003cli\u003eIncludes Heat-Sealable Butt-Splice Connectors\u003c\/li\u003e\n\u003cli\u003eDurable Construction for Reliable Long-Term Service\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51525600084251,"sku":"FPE-HAR-FMC-WIF-PT-1116","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at4.05.06PM.png?v=1766531129"},{"product_id":"sb-filters-82-1004-map-sensor-spacer-kit","title":"S\u0026B Filters 82-1004 MAP Sensor Spacer Kit","description":"\u003cp\u003e\nThe S\u0026amp;B Filters 82-1004 MAP Sensor Spacer Kit is designed to reduce soot buildup on the MAP (Manifold Absolute Pressure) sensor in your 2011–2019 Ford 6.7L Powerstroke. The factory sensor location, exposed to exhaust gas recirculation, can cause excessive soot and oil contamination that affects sensor accuracy and performance over time.\n\u003c\/p\u003e\n\u003cp\u003e\nThis spacer relocates the MAP sensor away from the contaminated air stream, keeping it cleaner and helping extend the sensor’s service life. Built with a durable billet aluminum spacer and finished in black anodize, this kit is engineered for longevity and straightforward installation using existing hardware.\n\u003c\/p\u003e\n\u003cp\u003e\nBy reducing soot buildup, the 82-1004 MAP Sensor Spacer helps maintain accurate sensor readings and reduces the frequency of maintenance or sensor replacement. This simple upgrade can contribute to smoother engine operation and better combustion efficiency.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMAP Sensor Spacer Kit for 2011–2019 Ford 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003eHelps Reduce Soot and Oil Buildup on MAP Sensor\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eAnodized Black Finish\u003c\/li\u003e\n\u003cli\u003eStraightforward Installation Using Factory Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026B Filters","offers":[{"title":"Default Title","offer_id":51525600346395,"sku":"82-1004","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at4.07.42PM.png?v=1766531295"},{"product_id":"readylift-46-2728-25-inch-coil-spring-lift-kit","title":"ReadyLift 46-2728 2.5\" Coil Spring Lift Kit","description":"\u003cp\u003eThe Banks Power Intercooler Boot Kit (46-2728) is designed to replace the factory charge air boots on your Ford 6.7L Powerstroke with heavy-duty silicone couplers for improved durability and boost retention. Factory rubber boots can weaken over time from heat and pressure, increasing the risk of boost leaks or failures under load.\u003c\/p\u003e\n\u003cp\u003eThis boot kit is constructed from reinforced, multi-layer silicone that is built to withstand higher boost pressures, elevated temperatures, and oil exposure commonly seen in both stock and modified trucks. Precision-molded for a proper fit, these boots help maintain consistent airflow while reducing the chance of blowing a boot during towing or hard acceleration.\u003c\/p\u003e\n\u003cp\u003eDesigned as a direct-fit replacement, the kit installs easily using the included high-strength clamps and requires no cutting or modification. This upgrade is ideal for daily-driven, towing, or performance-focused Powerstroke applications looking to eliminate a known weak point in the intercooler system.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty silicone intercooler boot upgrade\u003c\/li\u003e\n\u003cli\u003eImproves reliability over factory rubber boots\u003c\/li\u003e\n\u003cli\u003eResists heat, oil, and high boost pressure\u003c\/li\u003e\n\u003cli\u003eHelps prevent boost leaks and power loss\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation with included clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ReadyLift Suspension","offers":[{"title":"Default Title","offer_id":51525601689883,"sku":"46-2728","price":629.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at4.33.44PM.png?v=1766532830"},{"product_id":"readylift-46-2727-25-inch-coil-spring-lift-kit-bilstein","title":"ReadyLift 46-2727 2.5\" Coil Spring Lift Kit With Bilstein Shocks","description":"\u003cp\u003eThe ReadyLift 46-2727 2.5\" Coil Spring Lift Kit with Bilstein Shocks is designed to give your Ford Super Duty an aggressive stance while maintaining factory ride quality and handling. This complete suspension system provides approximately 2.5 inches of front lift, allowing for improved tire clearance and a leveled appearance without compromising drivability.\u003c\/p\u003e\n\u003cp\u003eThis kit features heavy-duty replacement front coil springs engineered to deliver the lift while retaining proper spring rates for comfort and control. Paired with Bilstein shocks, the suspension benefits from improved damping, stability, and performance both on-road and off-road. The Bilstein shocks are specifically tuned for lifted applications, helping to control body roll and absorb harsh impacts.\u003c\/p\u003e\n\u003cp\u003eDesigned as a bolt-on system, the ReadyLift 46-2727 lift kit installs without cutting or welding and maintains factory suspension geometry. It is ideal for daily driving, towing, and light off-road use while delivering a noticeable improvement in stance and capability.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides approximately 2.5 inches of front lift\u003c\/li\u003e\n\u003cli\u003eHeavy-duty front coil springs\u003c\/li\u003e\n\u003cli\u003eIncludes Bilstein shocks for improved ride control\u003c\/li\u003e\n\u003cli\u003eMaintains factory ride quality and handling\u003c\/li\u003e\n\u003cli\u003eIncreases tire clearance and aggressive stance\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no cutting or welding required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ReadyLift Suspension","offers":[{"title":"Default Title","offer_id":51525601755419,"sku":"46-2727","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at4.34.19PM.png?v=1766532864"},{"product_id":"alliant-power-ap0221-turbo-installation-kit","title":"Alliant Power Turbocharger Installation Kit With Clamps AP0221","description":"\u003cp\u003eThe Alliant Power AP0221 Turbocharger Installation Kit with Clamps is a complete hardware kit designed to support a proper turbocharger install on your Ford 6.7L Powerstroke. This installation kit includes all of the essential gaskets, seals, and heavy-duty clamps needed to mount and secure a replacement or upgraded turbocharger without having to source multiple parts individually.\u003c\/p\u003e\n\u003cp\u003eManufactured with durable materials and engineered for a precise fit, this kit helps ensure leak-free connections at the turbo inlet and outlet, as well as secure mounting to the engine and associated plumbing. Proper installation hardware plays a critical role in maintaining boost integrity, preventing exhaust leaks, and supporting long-term performance of your turbo system.\u003c\/p\u003e\n\u003cp\u003eIdeal for turbocharger service, replacement, or upgrade projects, the Alliant Power AP0221 kit simplifies installation and gives you confidence that all necessary sealing and mounting components are included for a clean, professional result.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete turbocharger installation hardware kit\u003c\/li\u003e\n\u003cli\u003eIncludes gaskets, seals, and heavy-duty clamps\u003c\/li\u003e\n\u003cli\u003eDurable construction for leak-free performance\u003c\/li\u003e\n\u003cli\u003eEnsures proper turbo fitment and sealing\u003c\/li\u003e\n\u003cli\u003eIdeal for turbo replacement or upgrade projects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alliant Power","offers":[{"title":"Default Title","offer_id":51525601984795,"sku":"AP0221","price":206.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at4.36.33PM.png?v=1766533019"}],"url":"https:\/\/wwmperformance.com\/collections\/2015-2016-6-7l-powerstroke-copy.oembed?page=6","provider":"WWM Performance","version":"1.0","type":"link"}