{"title":"2011-2014 6.7L Powerstroke","description":"","products":[{"product_id":"s-and-b-filters-cold-air-intake-2011-2016-ford-powerstroke-6-7l","title":"S\u0026B Cold Air Intake 75-5104 | 2011-2016 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eMaximum Performance:\u003c\/strong\u003e This cold air intake for the 2011–2016 Ford Powerstroke 6.7L is engineered to minimize air restriction and flows 36.98% better than stock. A fully enclosed airbox protects the filter from dirt and helps keep engine heat out of the intake path.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eLarge Air Filter \u0026amp; Free-Flowing Design:\u003c\/strong\u003e Available with either a dry extendable or cotton cleanable air filter, both filtering at over 99.26% efficiency. The large surface area and high dirt-holding capacity suit demanding use, while a free-flowing intake tube improves performance and enhances turbo sound.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSnap-In Lid Design:\u003c\/strong\u003e A patent-pending snap-in lid requires no screws, allowing quick installation and easy inspection. The filter can be installed or removed without taking off the intake tube. A silicone edge trim forms an airtight seal to block unwanted engine heat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConfigurable Airflow Options (Kit 75-5104):\u003c\/strong\u003e The included silicone box plug allows two airflow configurations. With the plug removed, an additional air inlet draws from the passenger-side fender area. With the plug installed, the secondary side inlet is sealed so the front-facing grille inlet and front scoop become the primary airflow sources.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNo Check Engine Lights:\u003c\/strong\u003e Designed to operate correctly with stock calibration or performance tuning. An injection-molded MAF plate and foam MAF sensor gasket provide an OE-quality seal for accurate sensor readings.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Cotton Cleanable","offer_id":51011135045915,"sku":"75-5104","price":379.0,"currency_code":"USD","in_stock":true},{"title":"Dry Extendable","offer_id":51011135078683,"sku":"75-5104D","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/8_75-5104_0.webp?v=1757362804"},{"product_id":"s-and-b-filters-filter-wrap-kf-1050","title":"S\u0026B Filter Wrap WF-1031 | Fits KF-1050 Filter Replacement","description":"\u003cp\u003eThe S\u0026amp;B Filters WF-1031 filter wrap is designed to keep debris out of your vehicle’s air intake system. Engineered to fit securely over S\u0026amp;B air filters, this wrap provides an added layer of protection against harmful particles. By blocking debris before it reaches the filter, the WF-1031 helps extend the life of the air intake system and ensures cleaner airflow to the engine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Quality construction, blocks out debris, and extends air filter service life.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Default Title","offer_id":51011135111451,"sku":"WF-1031","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/pdp_WF-1031_1.webp?v=1757362958"},{"product_id":"s-and-s-diesel-cp4-6-7f-bp-g2-1-gen2-1-cp4-disaster-prevention-bypass-kit","title":"S\u0026S DIESEL GEN2.1 CP4 DISASTER PREVENTION BYPASS KIT CP4-6.7F-BP-G2.1 | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eProtect the fuel system in your Ford 6.7L Powerstroke from potential CP4 pump failure with the S\u0026amp;S Diesel Gen2.1 CP4 Disaster Prevention Bypass Kit (CP4-6.7F-BPG2.1). Developed by S\u0026amp;S Diesel Motorsport®, the original creator of the Disaster Prevention Kit, this improved second-generation version builds on years of engineering experience to deliver even greater reliability and protection.\u003c\/p\u003e\n\u003cp\u003eThe Gen2.1 kit uses OE-style quick connect lines, eliminating the need for cutting the factory supply line or using compression fittings—both of which can introduce debris or leaks. Threaded joints have also been eliminated, further reducing potential leak points and debris risks during installation. This design ensures a cleaner and more reliable installation process.\u003c\/p\u003e\n\u003cp\u003eThe main function of the bypass kit is to independently supply the CP4 case and metering unit\/plungers with clean, filtered fuel while rerouting case fuel back to the tank. The Gen2.1 kit improves on this design by splitting the fuel supply 25 inches away from the CP4, virtually eliminating the chance of contaminated case fuel feeding back into the clean line. It also incorporates a billet return filter head that accepts a standard spin-on fuel filter, preventing CP4 debris from reaching the tank, lines, and supply pump. This eliminates the need for dropping the fuel tank after a CP4 failure—something that was still required with the original bypass kit.\u003c\/p\u003e\n\u003cp\u003eThanks to efficient design and material use, these improvements come without a significant cost increase. The Gen2.1 kit fits all 2011 and newer Ford Super Duty F250\/F350\/F450\/F550 trucks with the 6.7L Powerstroke, removing the need to select by model year.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Made in the USA, validated in real-world testing, improves CP4 output past 3,000 RPM, OE-style quick connects for easy installation, one part number fits all 2011+ model years, safeguards injectors, rails, lines, and tank from debris, billet filter head accepts standard spin-on filters, includes Donaldson P550943 fuel filter (9-micron at 99% efficiency), and can extend truck range in the event of a CP4 failure.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Default Title","offer_id":51011136848155,"sku":"CP4-6.7F-BP-G2.1","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Cp4-6.7F-BP-G2.1-2025.jpg?v=1757363355"},{"product_id":"s-and-s-diesel-cp4-to-dcr-fuel-pump-conversion-kit","title":"S\u0026S DIESEL CP4 TO DCR FUEL PUMP CONVERSION KIT 6.7F-DCR-1 | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eUpgrade the reliability of your Ford 6.7L Powerstroke with the S\u0026amp;S Diesel CP4 to DCR fuel pump conversion kit (6.7F-DCR-1). The CP4 pump has a history of sudden failure, often leading to complete power loss and costly high-pressure fuel system damage exceeding $10,000. With recalls and lawsuits surrounding the CP4.2, replacing it is the best way to protect the engine and fuel system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Drop-In Solution:\u003c\/strong\u003e Developed by S\u0026amp;S Diesel Motorsport® in partnership with PurePower, this kit replaces the CP4 with a proven Stanadyne DCR high-pressure fuel pump. Specifically engineered for the 6.7 Powerstroke, the DCR pump matches the CP4 output curve and requires no ECU recalibration. The kit uses OE-grade braided hose and steel fuel lines for a factory-fit appearance and dependable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable DCR High-Pressure Fuel Pump:\u003c\/strong\u003e The two-piston DCR pump features a compact, modular design for seamless integration. It offers low hydraulic and acoustical noise, ultra-fast response times, and compatibility with biofuel and low-lubricity fuels. Its patented eccentric drive pumping technology, paired with a pressure-lubricated cam and bushings, delivers exceptional durability and efficiency. The corrosion-resistant fuel control actuator (FCA) prevents debris intrusion, ensuring long service life in harsh conditions. With a maximum fuel delivery of 1,250 mm³ per revolution—25% more than the CP4.2—the DCR pump provides ample flow, even for worn injectors with high return rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtect Productivity:\u003c\/strong\u003e By replacing the CP4 with the DCR pump, Ford Super Duty owners can avoid repair costs ranging from $10,000 to $15,000 while gaining peace of mind that their workhorse will stay reliable on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e OE fit and function, corrosion-resistant FCA, low noise operation, eccentric drive pumping technology, pressure-lubricated cam and bushings, no ECU calibration required, biofuel and low-lubricity fuel compatibility, two-piston DCR pump manufactured by Stanadyne, 1,250 mm³\/rev displacement (+25% over CP4.2), and a durable plug-and-play replacement for the CP4.2 injection pump. Compatible with Ford F250, F350, F450, F550, F650, and F750 trucks equipped with the 6.7L Powerstroke.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes:\u003c\/strong\u003e For 2011–2016 models, the vacuum pump gasket is one-time use and must be replaced. It is recommended to add this gasket to the order for a complete installation. Most other gaskets and seals can be reused if undamaged, but the MAHLE GS33697 fuel injection pump mounting gasket kit is available for those who prefer new gaskets and includes the required vacuum pump gasket.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Default Title","offer_id":51011136880923,"sku":"6.7F-DCR-1","price":2400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6.7F-DCR-Line-Update-25.jpg?v=1757363575"},{"product_id":"spe-motorsport-2011-2024-6-7l-powerstroke-coolant-hose-reroute-kit","title":"SPE Motorsport Coolant Hose Reroute Kit SPE-S100163 | 2011-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe SPE Motorsport coolant hose reroute kit is engineered to replace and eliminate the factory heater coolant inlet tube and degas return hoses on 2011–2024 Ford 6.7L Powerstroke engines. Factory hoses often detract from the appearance of aftermarket upgrades such as intake piping and turbo kits. This kit provides a streamlined solution that follows the curvature of the engine, offering a clean, aesthetically pleasing look under the hood while improving durability and reliability.\u003c\/p\u003e\n\n\u003cp\u003eConstructed with 5-ply polyester-reinforced silicone capable of withstanding high temperatures and pressures, the kit also includes an anodized billet aluminum heater inlet fitting and factory-style quick connects. The long, continuous silicone lines eliminate the need for T-fittings or barbs, reducing potential leak points. As a plug-and-play system, it requires no cutting or adapting to factory lines, making installation straightforward and hassle-free.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e Simple, clean installation; designed to complement aftermarket engine bay upgrades; form-fitted specifically for the 6.7L Powerstroke; 5-ply reinforced silicone hoses for strength and longevity; billet aluminum heater inlet fitting; continuous hoses with no T-fittings or barbs; plug-and-play fitment; and improved durability over factory rubber hoses.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Billet aluminum heater inlet adapter, two 5-ply polyester reinforced silicone hoses, two 90° quick connect hose ends, four hose clamps, and O-ring with mounting hardware.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"Default Title","offer_id":51011136913691,"sku":"SPE-S100163","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/4_2000x_1907da6d-dab8-4cd0-b9a9-51993a66f06e.webp?v=1757363849"},{"product_id":"spe-motorsport-2011-2022-6-7l-powerstroke-injector-return-repair-kit","title":"SPE Motorsport Injector Return Repair Kit SPE-S100155 | 2011-2022 Powerstroke 6.7L","description":"\u003cp\u003eThe SPE Motorsport injector return repair kit is designed as a permanent upgrade for the brittle, failure-prone factory return line nipple on 2011–2022 Ford 6.7L Powerstroke engines. The OEM nipple is a known weak point due to its size and location near the upper fuel filter, where it can easily break during service or while under pressure. A failure results in fuel spraying under the hood, creating a fire hazard and leaving the truck inoperable until repaired.\u003c\/p\u003e\n\n\u003cp\u003eThis repair kit replaces the fragile plastic components with a billet aluminum, black anodized design that is built to last. For 2011–2016 Powerstroke models, the kit includes an injector return manifold with a reference port for diagnostic use, such as fuel pressure readings or a fuel pressure gauge. For 2017–2022 Powerstroke models, the kit provides a simplified return body with custom-designed nylon retainer inserts and O-rings to maintain a factory-style connection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits:\u003c\/strong\u003e Simple, do-it-yourself installation; billet aluminum black anodized construction; diagnostic reference port included for 2011–2016 models; durable design that outlasts factory plastic; compact and clean appearance; compatible with all 6.7L Powerstroke generations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e Injector return manifold (2011–2016 only), injector return body, quick connect fitting (2011–2016 only), NPT plug (2011–2016 only), pre-installed nylon retainer insert, pre-installed O-rings, and fuel injection clamp.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"11-16","offer_id":51188351369499,"sku":"SPE-S100155","price":69.0,"currency_code":"USD","in_stock":true},{"title":"17-22","offer_id":51505841799451,"sku":"SPE-S100156","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/1_2000x_b11c930c-bde0-4037-bd12-3e96ba88f0dd.webp?v=1757364009"},{"product_id":"spe-6-7l-powerstroke-low-temp-high-flow-thermostat","title":"SPE Low Temp, High Flow Thermostat SPE-S100119 | 2017–2019 Powerstroke 6.7L","description":"\u003cp\u003eHigh fluid temperatures are a common issue on 6.7L Powerstroke trucks, especially under load or during towing. The SPE low temp, high flow thermostat provides a simple, engineered solution that effectively reduces coolant, oil, and transmission temperatures (on 2017–2019 models).\u003c\/p\u003e\n\n\u003cp\u003eThe factory thermostat opens at 194\/201°F, while the SPE thermostat opens earlier at 175\/180°F. This 19–21 degree difference delivers noticeable improvements, with temperature drops of up to 30°F observed during operation. Extensive testing and development have resulted in a cost-effective and reliable upgrade for Powerstroke owners seeking better thermal management.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e Quick 15-minute installation, thermostat opens at 175\/180°F, reduces fluid temperatures by up to 30°F, lowers coolant temperatures, lowers oil temperatures, and lowers transmission temperatures on 2017–2019 models.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"Default Title","offer_id":51011137011995,"sku":"SPE-S100119","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/4_2000x_266a625b-30f3-49d0-adee-2dc6059d786c.webp?v=1757364097"},{"product_id":"spe-motorsport-6-7l-powerstroke-ccv-reroute-kit","title":"SPE Motorsport CCV Reroute Kit SPE-S100379 | 2011–2024 Powerstroke 6.7L","description":"\u003cp\u003eThe SPE CCV reroute kit is designed to prevent oil vapors from re-entering the intake system on 2011–2024 Ford 6.7L Powerstroke engines. By venting crankcase blow-by externally, this kit reduces the buildup of oil deposits that can cause valve gumming, intake sludge, and reduced engine performance. The venturi-style design eliminates the need for restrictive baffles and captures oil at the base of the nipple before it enters the hose, resulting in virtually no oil loss and no puddling under the truck.\u003c\/p\u003e\n\n\u003cp\u003eUnlike the OEM crankcase vent system, which recirculates gases back into the intake due to emissions standards, this kit provides a cleaner solution that improves engine longevity. The included ¾” 100% silicone reinforced hose is specifically designed for oil applications and offers a larger diameter than competing kits. Its streamlined routing over the brake booster ensures optimal pressure flow with no sharp angles, reducing the risk of oil dripping or restrictions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e Vents crankcase blow-by to reduce oil deposits, prevents boot soak and intake gumming, eliminates the factory crankcase box to free up space, venturi-style design for unrestricted flow, virtually no oil loss, streamlined routing with no sharp angles, and includes a durable ¾” silicone reinforced hose. Available in raw or black anodized finishes for enhanced durability.\u003c\/p\u003e","brand":"SPE Motorsport","offers":[{"title":"Default Title","offer_id":51011137044763,"sku":"SPE-S100379","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_1281_2000x_48c05858-a0b0-4a3c-bad2-84d55e392e37.webp?v=1757364204"},{"product_id":"fleece-fuel-filter-bypass-fpe-fmc-ffb-1124","title":"FLEECE FUEL FILTER BYPASS FPE-FMC-FFB-1124 | 2011-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe Fleece FPE-FMC-FFB-1124 fuel filter bypass is designed to simplify and clean up the engine bay of Ford 6.7L Powerstroke trucks. Ideal for applications using an aftermarket lift pump or auxiliary fuel filtration system, this bypass provides a direct-fit solution to eliminate the factory under-hood filter, which is prone to cracking. Installation is straightforward, requiring no cutting, splicing, or modification of the factory fuel lines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Quick-disconnect fittings, drop-in replacement for the factory under-hood filter, heavy-duty anodized billet aluminum construction, and no need to cut or modify lines. Shipping restrictions apply; not available in California.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Compatible with 2011–2024 Ford F250, F350, F450, and F550 trucks equipped with the 6.7L Powerstroke. 2011–2016 models use one inlet and one outlet fitting. 2017–2024 models require an additional quick-disconnect fitting (included) for the fuel return line.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product eliminates the OEM under-hood filtration and must be used only with auxiliary fuel filtration systems that meet or exceed the factory’s fuel filtration specifications.\u003c\/p\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51011137339675,"sku":"FPE-FMC-FFB-1124","price":148.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/fpe-fmc-ffb-1124-k1.png?v=1757364724"},{"product_id":"xdp-hd-intercooler-pipe-direct-fit-xd458","title":"XDP HD INTERCOOLER PIPE - DIRECT-FIT XD305","description":"\u003cp\u003eThe XDP HD intercooler pipe XD458 is a direct-fit replacement for the failure-prone factory pipe on 2011–2016 Ford 6.7L Powerstroke trucks. The stock plastic intercooler pipe is known to burst under heavy load or towing conditions, often leaving drivers stranded. The XD458 solves this issue by providing a stronger, more reliable upgrade.\u003c\/p\u003e\n\n\u003cp\u003eDesigned to match the same fit, size, and layout as the factory component, the XDP HD intercooler pipe is constructed from durable steel and includes reinforced silicone couplers with heavy-duty T-bolt clamps. This combination ensures long-lasting performance and the ability to withstand the heat, pressure, and output of the Powerstroke engine. The pipe also features a factory-style connector that snaps into the OEM location, requiring no modifications for installation. An O-ring seal (XD459) is included for a secure, leak-free fit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Direct-fit installation, cold-side intercooler pipe design, reinforced silicone couplers, T-bolt clamps for secure connections, includes XDP intercooler adapter O-ring seal (XD459), and backed by a 2-year\/unlimited mileage warranty.\u003c\/p\u003e","brand":"Extreme Diesel Performance","offers":[{"title":"Default Title","offer_id":51011137372443,"sku":"XD458","price":295.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at2.52.57PM.png?v=1757364850"},{"product_id":"synergy-8612-24-caster-sleeves","title":"Synergy Caster Sleeves  8612-24 | 2005-2023 Powerstroke 6.0L, 6.7L","description":"\u003cp\u003eThe Synergy 8612-24 caster sleeves are designed to improve suspension geometry when lifting or leveling 2005–2023 Ford F-250\/F-350 4WD trucks. Leveling or lifting can cause factory caster settings to decrease, which affects steering feel and return-to-center. These sleeves correct the issue by restoring caster to factory specifications, helping to minimize steering wander and maintain proper handling characteristics.\u003c\/p\u003e\n\u003cp\u003eEach Dana 60 ball joint sleeve shim provides 2.4 degrees of caster adjustment and -1 to +0.4 degrees of camber adjustment. Made from high-strength 1045 steel and zinc plated for corrosion resistance, the sleeves are durable and maintenance-free. No modifications are required for installation, making this an easy upgrade for leveled or lifted trucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Adds 2.4° of caster, camber adjustable from -1° to +0.4°, helps minimize steering wander, no modifications required, made from high-strength 1045 steel, zinc plated for corrosion protection, maintenance-free design, restores steering return-to-center, and backed by a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e (2) caster sleeves and (2) cotter pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Compatible with 2.5\" leveling kits. Only for use on 4x4 front axles.\u003c\/p\u003e","brand":"Synergy Manufacturing","offers":[{"title":"Default Title","offer_id":51011137437979,"sku":"8612-24","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/8612-24-MAIN-1200.jpg?v=1757365032"},{"product_id":"no-limit-fabrication-universal-venturi","title":"No Limit Fabrication Universal Venturi NLF-Uni-Venturi | 2000-2024 Powerstroke 6.7L","description":"\u003cp\u003eThe No Limit venturi is a universal component designed for use with the No Limit catch can or other custom applications. Built from durable 409 stainless steel, this venturi is engineered for strength and longevity. Welding is required for installation, making it ideal for custom fabrication projects where a reliable and versatile venturi design is needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e No Limit venturi, 409 stainless steel construction, compatible with catch can systems or other uses, universal application, welding required, sold individually. \u003cbr\u003e\u003cstrong\u003eSKU:\u003c\/strong\u003e VENTURI\u003c\/p\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51011137470747,"sku":"NLF-Uni-Venturi","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198752126.jpg?v=1757365169"},{"product_id":"no-limit-fabrication-raw-stage-2-air-to-water-intercooler-67icr11162","title":"No Limit Fabrication Raw Stage 2 Air-to-Water Intercooler 67ICR11162 | 2011-2016 Powerstroke 6.7L","description":"\u003cp\u003eThe No Limit Fabrication 67ICR11162 raw stage 2 air-to-water intercooler provides the turbocharger in Ford 6.7L Powerstroke trucks with cooler, denser air for maximum performance. Designed to improve throttle response, this intercooler can deliver up to a 2 PSI boost increase, lower exhaust gas temperatures (EGTs), and reduce spool-up time. The result is better drivability, improved low-end torque, and increased horsepower. Customers have reported gains of up to 20 horsepower, 60 ft-lb of torque, and even up to 1 MPG fuel economy improvement. Field testing on a stock 2020 Power Stroke demonstrated an increase of 21 horsepower and 80 ft-lb of torque.\u003c\/p\u003e\n\n\u003cp\u003eThis intercooler is a major reliability upgrade over the factory unit, ensuring consistent performance under heavy loads. Independent testing indicates a cruising and peak EGT reduction of 50–100 degrees, along with noticeable improvements in throttle response and overall driving characteristics. Built with billet end tanks and a 55% larger core, it also provides a 31% increase in airflow. The intercooler is sold as a complete kit for easy installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Enhances throttle response, reduces EGTs, decreases spool-up times, increases low-end power and torque, 55% larger core, 31% increase in airflow, billet end tanks, and sold as a comprehensive kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Shipping restrictions apply. Not available for sale in California.\u003c\/p\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51011137569051,"sku":"67ICR11162","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at3.41.56PM.png?v=1757367781"},{"product_id":"xdp-fuel-system-contamination-kit-no-pump-stock-replacement-xd611","title":"XDP Fuel System Contamination Kit – No Pump (Stock Replacement) + DCR\/CP3 Conversion XD611 | 2011-2014 Powerstroke 6.7L","description":"\u003cp\u003eThe XDP fuel system contamination kit – no pump (stock replacement) XD611 is designed to restore proper operation after a CP4 pump failure or other contamination issues such as DEF or water intrusion. The factory CP4 injection pump in Ford Super Duty trucks is a well-known failure point, and when it fails, debris is sent throughout the fuel system. This debris can damage injectors, fuel rails, lines, and other critical components. Simply flushing the system is not enough to guarantee removal of all contaminants, so replacement of key parts is required.\u003c\/p\u003e\n\u003cp\u003eThis kit provides all of the major components necessary to get the truck back on the road while allowing the customer to select their own high-pressure pump, such as the S\u0026amp;S Diesel 6.7F-DCR CP4 to DCR conversion. By replacing injectors, lines, and rails, the risk of contaminating the new pump and components with debris from the failed unit is eliminated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes (1) fuel return line\u003c\/li\u003e\n\u003cli\u003eIncludes (8) fuel injector lines\u003c\/li\u003e\n\u003cli\u003eIncludes (1) CP4 pump installation kit\u003c\/li\u003e\n\u003cli\u003eIncludes (8) fuel injector hold-down bolts\u003c\/li\u003e\n\u003cli\u003eIncludes (2) genuine Bosch fuel rails with sensors\u003c\/li\u003e\n\u003cli\u003eIncludes (8) genuine Bosch remanufactured fuel injectors\u003c\/li\u003e\n\u003cli\u003eBacked by a 2-year\/unlimited mileage warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Core return applies only to fuel injectors and fuel rails. Contaminated fuel lines do not need to be returned.\u003c\/p\u003e","brand":"Extreme Diesel Performance","offers":[{"title":"Default Title","offer_id":51011137601819,"sku":"XD611","price":3270.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-09-08at3.43.47PM.png?v=1757367845"},{"product_id":"6-7l-ford-powerstroke-injectors-2011-2019","title":"S\u0026S Diesel Motorsport Injector Set 6.7F-SAC-SET | 2011-2019 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S Upgrades:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach S\u0026amp;S injector set is engineered with precision processes to deliver reliable and consistent performance. A proprietary nozzle honing process ensures clean, consistent holes, while nozzles are flow-matched to a 1% variance per set, using OE standards (Viscor SAE-J967 at 40°C, 100 bar). Injectors are flow-matched to within 3% variance per set (except TorqueMaster models) and tested across four different pressure and energizing points per injector. Injection profiles (rate shape) are carefully aligned, and injector build specifications are custom-matched to the nozzle flow rate for each size, including internal modifications such as piezo adjustments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe industry standard for nozzle sizing is based on percentage increases in flow over stock. Available sizes include: TorqueMaster, 30%, 45%, 60%, 80%, 100%, 150%, 200%, 250%, and 300%.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCore Policy:\u003c\/strong\u003e Core returns are required. A $150 charge applies if no core is returned after 30 days.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Choose an option","offer_id":51188348977435,"sku":"6.7F-SAC-SET","price":3450.0,"currency_code":"USD","in_stock":true},{"title":"6.7 Ford TorqueMaster injector","offer_id":51503100526875,"sku":"6.7F-10SAC-SET","price":3450.0,"currency_code":"USD","in_stock":true},{"title":"30% over 6.7 Ford injector","offer_id":51503100559643,"sku":"6.7F-30SAC-SET","price":3952.0,"currency_code":"USD","in_stock":true},{"title":"45% over 6.7 Ford injector","offer_id":51503100592411,"sku":"6.7F-45SAC-SET","price":4066.4,"currency_code":"USD","in_stock":true},{"title":"60% over 6.7 Ford injector","offer_id":51503100625179,"sku":"6.7F-60SAC-SET","price":4149.6,"currency_code":"USD","in_stock":true},{"title":"80% over 6.7 Ford injector","offer_id":51503100657947,"sku":"6.7F-80SAC-SET","price":4420.0,"currency_code":"USD","in_stock":true},{"title":"100% over 6.7 Ford injector","offer_id":51503100690715,"sku":"6.7F-100SAC-SET","price":4420.0,"currency_code":"USD","in_stock":true},{"title":"150% over 6.7 Ford injector","offer_id":51503100723483,"sku":"6.7F-150SAC-SET","price":4836.0,"currency_code":"USD","in_stock":true},{"title":"200% over 6.7 Ford injector","offer_id":51503100756251,"sku":"6.7F-200SAC-SET","price":4836.0,"currency_code":"USD","in_stock":true},{"title":"250% over 6.7 Ford injector","offer_id":51503100789019,"sku":"6.7F-250SAC-SET","price":5980.0,"currency_code":"USD","in_stock":true},{"title":"300% over 6.7 Ford injector","offer_id":51503100821787,"sku":"6.7F-300SAC-SET","price":5980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6.7F-SAC-SET.jpg?v=1757369949"},{"product_id":"2011-2014-ford-6-7-tts-gen2-59-63-billet-stock-plus","title":"Titan Turbo Service GEN2 59\/63 Billet Stock Plus Turbo TTS-1114-6.7-5963 | 2011-2014  Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eThe Ultimate Stock Replacement\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titan Turbo Service GEN2 59\/63 Billet Stock Plus Turbo is built to take 2011–2014 Ford 6.7L Powerstroke trucks to the next level of towing and daily driving performance. Featuring a precision-engineered race cover, this turbocharger delivers smooth, reliable power with a distinctive sound and exceptional durability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e59mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Provides increased airflow and horsepower with precise, efficient performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e63mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Produces a strong, versatile powerband and unique exhaust note, ideal for towing and daily use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Ensures long-lasting reliability under demanding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarrett VGT Solenoid:\u003c\/strong\u003e Provides precise control, improving turbo responsiveness and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes all necessary parts for seamless installation with no retrofit kits required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Performance:\u003c\/strong\u003e Supports up to 575 rwhp with proper modifications and tuning, while maintaining excellent drivability and towing power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Unit:\u003c\/strong\u003e Hassle-free installation designed for 2011–2014 Ford 6.7L pickups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e 1-year\/12,000-mile warranty protects against manufacturer defects (requires AMDP tuning; warranty void with alternative tuning).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e Available with custom powder coating and polishing for a personalized appearance (2+ week lead time).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eUnlock the Ultimate Towing Experience:\u003c\/strong\u003e With unmatched towing capability, smooth daily driving characteristics, and a bold exhaust note, the Titan Turbo Service GEN2 59\/63 Billet Stock Plus Turbo is the ultimate upgrade for any 2011–2014 Powerstroke owner.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw","offer_id":51011143270683,"sku":"TTS-1114-6.7-5963-Raw-9","price":2675.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead)","offer_id":51011143303451,"sku":"TTS-1114-6.7-5963-PC-9","price":2925.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead)","offer_id":51011143336219,"sku":"TTS-1114-6.7-5963-POL-9","price":2925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_5439_525x700_ab8f25b1-404c-4b32-aaf1-c67d2e726bf8.webp?v=1757516966"},{"product_id":"2011-2014-ford-6-7-tts-gen2-62-64","title":"Titan Turbo GEN2 62\/64 Ultimate TowMaster | 2011-2014 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eThe Ultimate Towing Companion\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titan Turbo Service GEN2 62\/64 Towmaster Turbo is built to enhance the towing and driving performance of 2011–2014 Ford 6.7L Powerstroke trucks. With a custom-engineered race cover and precision-crafted components, this turbocharger delivers smooth power, reliability, and the distinctive sound Titan is known for.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e62mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Designed for increased airflow and horsepower with exceptional efficiency and strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Provides an impressive powerband, quicker response, and a unique exhaust note, ideal for towing and daily driving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Offers full-circle lubrication for long-lasting durability under demanding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarrett VGT Solenoid:\u003c\/strong\u003e Ensures precise turbo control for consistent responsiveness and optimized performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes everything needed for a seamless installation with no retrofit kits required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Performance:\u003c\/strong\u003e Supports up to 600 rwhp with proper tuning and modifications, while maintaining stock-like drivability and towing capabilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Unit:\u003c\/strong\u003e Designed for hassle-free installation on 2011–2014 Powerstroke pickups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty against manufacturer defects. Requires AMDP tuning; warranty is void if alternative tuning is used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e Custom powder coating and polishing available (2+ week lead time) for a personalized finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eUnlock the Ultimate Towing Experience:\u003c\/strong\u003e The Titan Turbo Service GEN2 62\/64 Towmaster Turbo delivers unmatched towing performance, daily driving reliability, and a bold sound. Upgrade your Powerstroke with confidence and elevate your driving experience.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw","offer_id":51011143368987,"sku":"TTS-1114-6.7-6264","price":2775.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead)","offer_id":51011143401755,"sku":"TTS-1114-6.7-6264-PC","price":3025.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead)","offer_id":51011143434523,"sku":"TTS-1114-6.7-6264-POL","price":3025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/IMG_5439_1800x2400_200c77da-eb62-4ccd-8b5f-1c977380f0c5.webp?v=1757517663"},{"product_id":"2011-2014-ford-6-7-tts-gen2-62-67-towmaster","title":"Titan Turbo GEN2 62\/67 TowMaster | 2011-2014 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eUnleash Unrivaled Power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titan Turbo Service GEN2 62\/67 Turbo is a custom-built performance upgrade for 2011–2014 Ford 6.7L Powerstroke trucks. Featuring TTS’ exclusive race cover and precision-engineered components, this turbocharger is designed to deliver maximum power, reliability, and drivability, whether for towing, daily use, or high-performance applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e62mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Provides increased airflow and horsepower with precision-engineered design for peak performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Enhances flow and responsiveness, allowing the engine to operate at its highest efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Offers superior durability and reliability under demanding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarrett VGT Solenoid:\u003c\/strong\u003e Ensures precise turbocharger control and responsiveness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes all parts required for seamless integration with no retrofit kits needed. Kit includes:\n\u003cul\u003e\n\u003cli\u003eUpdated coolant feed line with billet riser\u003c\/li\u003e\n\u003cli\u003ePoly cap to block off the lower intake secondary inlet\u003c\/li\u003e\n\u003cli\u003eTransition boot from lower intake manifold to turbo inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Power:\u003c\/strong\u003e Rated for up to 650 rwhp with supporting mods and tuning. Compatible with stock to ’15+ CP4’s with 55% over plungers, delivering extra power, an aggressive exhaust note, and towing capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty covering manufacturer defects. Requires AMDP tuning for warranty coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Options:\u003c\/strong\u003e Available with powder coating and polishing (2+ week lead time).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Professional installation and custom tuning are recommended to maximize performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnleash the full potential of your 2011–2014 Ford 6.7L Powerstroke with the Titan Turbo Service GEN2 62\/67 Turbo.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw","offer_id":51011143500059,"sku":"TTS-1114-6.7-6267TM","price":2875.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead)","offer_id":51011143532827,"sku":"TTS-1114-6.7-6267TM-PC","price":3125.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead)","offer_id":51011143565595,"sku":"TTS-1114-6.7-6267TM-POL","price":3125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/4EEE5B12-89CF-4B2F-AEC8-471345547D65_1800x2400_992281e9-3420-4ba9-b005-74f973911216.webp?v=1757517761"},{"product_id":"2011-2014-ford-6-7-tts-gen2-64-67","title":"Titan Turbo GEN2 64\/67 | 2011-2014 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eUnleash Maximum Power with Confidence\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titan Turbo Service GEN2 64\/67 Turbo is built to elevate the performance of 2011–2014 Ford 6.7L Powerstroke trucks. Featuring a custom-engineered race cover and redesigned components, this brand-new unit delivers exceptional power, drivability, and reliability for both work and play.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e64mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Precision-crafted to maximize airflow and horsepower for peak performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Designed to provide exceptional flow, responsiveness, and efficiency under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Ensures superior lubrication and durability compared to factory components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarrett VGT Solenoid:\u003c\/strong\u003e Delivers precise turbocharger control for optimized response and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes all necessary parts for seamless installation without retrofit kits:\n\u003cul\u003e\n\u003cli\u003eUpdated coolant feed line with billet riser\u003c\/li\u003e\n\u003cli\u003ePoly cap to block off the lower intake secondary inlet\u003c\/li\u003e\n\u003cli\u003eTransition boot from lower intake manifold to turbo inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpressive Power:\u003c\/strong\u003e Rated for up to 700 rwhp with supporting modifications and tuning. Compatible with hot-tuned early CP4’s and 10mm stroker pumps, delivering maximum output while retaining towability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Backed by a 1-year\/12,000-mile warranty covering manufacturer defects. Requires AMDP tuning for warranty coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Options:\u003c\/strong\u003e Powder coating and polishing available with a 2+ week lead time for a tailored finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Professional installation and custom tuning are recommended to achieve full performance potential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnleash the true power of your 2011–2014 Ford 6.7L Powerstroke with the Titan Turbo Service GEN2 64\/67 Turbo.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw","offer_id":51011143598363,"sku":"TTS-1114-6.7-6467","price":2975.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead)","offer_id":51011143631131,"sku":"TTS-1114-6.7-6467-PC","price":3225.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead)","offer_id":51011143663899,"sku":"TTS-1114-6.7-6467-POL","price":3225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/7BE70EC5-72BB-4FA3-B4F0-5136C7E4317E_525x700_43691f78-9dfd-4727-a16e-ee50ed8eb58b.webp?v=1757517803"},{"product_id":"2011-2014-ford-6-7-tts-gen2-66-67","title":"Titan Turbo GEN2 66\/67 | 2011-2014 Powerstroke 6.7L","description":"\u003cp\u003e\u003cstrong\u003eUnleash Power and Versatility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titan Turbo Service GEN2 66\/67 Turbo is engineered to take 2011–2014 Ford 6.7L Powerstroke trucks to unparalleled levels of power, responsiveness, and towing capability. Featuring TTS’ exclusive race cover and precision-built components, this turbocharger is designed for drivers seeking both performance and reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e66mm Dual Plane Billet TTS Compressor Wheel:\u003c\/strong\u003e Provides exceptional airflow and horsepower, maximizing performance potential.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67mm Custom High Flow 9-Blade TTS Turbine Wheel:\u003c\/strong\u003e Delivers impressive torque, responsiveness, and optimized exhaust flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Thrust Bearing:\u003c\/strong\u003e Built for durability and longevity, ensuring reliable operation under high-performance demands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarrett VGT Solenoid:\u003c\/strong\u003e Provides precise turbocharger control, improving responsiveness and drivability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Includes all required parts for seamless integration without retrofit kits, simplifying installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnleash the Power:\u003c\/strong\u003e Capable of supporting up to 750 rwhp with supporting modifications and tuning, while retaining towing capability for practical use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Drop-In Unit:\u003c\/strong\u003e Designed for straightforward installation into 2011–2014 Powerstroke pickups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Warranty:\u003c\/strong\u003e Protected by a 1-year\/12,000-mile limited warranty covering manufacturer defects. Requires AMDP tuning for warranty coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e Powder coating and polishing available with a 2+ week lead time for a customized finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDiscover Unrivaled Performance:\u003c\/strong\u003e The Titan Turbo Service GEN2 66\/67 Turbo unlocks unmatched power and versatility, making it the ultimate upgrade for any 2011–2014 Ford 6.7L Powerstroke.\u003c\/p\u003e","brand":"Titan Turbo Service","offers":[{"title":"Raw","offer_id":51011143696667,"sku":"TTS-1114-6.7-6667","price":3075.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Coating (6-10 day lead)","offer_id":51011143729435,"sku":"TTS-1114-6.7-6667-PC","price":3325.0,"currency_code":"USD","in_stock":true},{"title":"Polished (5 day lead)","offer_id":51011143762203,"sku":"TTS-1114-6.7-6667-POL","price":3325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/4EEE5B12-89CF-4B2F-AEC8-471345547D65_1800x2400_a1336f98-4d09-470c-935c-2f12ea00bdb3.webp?v=1757517878"},{"product_id":"s-and-b-filters-intake-replacement-filter-kf-1050-kf-1050d","title":"S\u0026B Intake Replacement Filter KF-1050 \u0026 KF-1050D | 1994-1997, 2011-2016 \u0026 2020-2026 Powerstroke 7.3L \u0026 6.7L","description":"\u003cp\u003eThe S\u0026amp;B Filters KF-1050D Replacement Filter is designed for use with S\u0026amp;B Cold Air Intake Systems. Built with an innovative full round inlet radius, this filter ensures a smooth transition of airflow while accommodating a larger surface area for maximum efficiency. The result is improved airflow and superior filtration, helping to maintain engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Large inlet design, disposable dry filter construction, and ISO 5011 filtration testing for proven performance and durability.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe S\u0026amp;B Filters KF-1050 replacement filter (cleanable) is an 8-ply cotton filter designed for use with S\u0026amp;B cold air intake systems. Engineered with a full round inlet radius, this filter provides a smooth transition for airflow, allowing for a larger surface area. The result is improved airflow and superior filtration performance, ensuring optimal engine protection and efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Larger inlet for increased airflow, cleanable 8-ply cotton media, and ISO 5011 filtration testing for proven performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e S\u0026amp;B has updated and redesigned many intake systems over the years. Verify your original filter and intake system before purchasing to ensure proper fitment.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Cotton Cleanable","offer_id":51017474670875,"sku":"KF-1050","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Dry Extendable","offer_id":51017474703643,"sku":"KF-1050D","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/pdp_KF-1050M.webp?v=1757518802"},{"product_id":"2011-2014-ford-6-7l-powerstroke-engine-tuning-by-ppei","title":"2011 - 2014 Ford 6.7L Powerstroke | Engine Tuning by PPEI","description":"\u003cp\u003e\u003cstrong\u003eCARB EO Pending\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGain \u003cstrong\u003e100+ HP\u003c\/strong\u003e over stock, tow with confidence, and enjoy quicker acceleration. PPEI calibrations are engineered for optimal efficiency, balancing power, drivability, and reliability.\u003c\/p\u003e\n\u003ch3\u003ePower Levels\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLevel 1: +15 HP\u003c\/li\u003e\n\u003cli\u003eLevel 2: +35 HP\u003c\/li\u003e\n\u003cli\u003eLevel 3: +65 HP\u003c\/li\u003e\n\u003cli\u003eLevel 4: +85 HP\u003c\/li\u003e\n\u003cli\u003eLevel 5: +100 HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved throttle response and acceleration\u003c\/li\u003e\n\u003cli\u003eSmoother driving with optimized shift scheduling (when paired with transmission tuning)\u003c\/li\u003e\n\u003cli\u003eDesigned to maximize efficiency under daily driving and towing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired:\u003c\/strong\u003e EZ LYNK AutoAgent 2 (this package installs \u003cem\u003eonly\u003c\/em\u003e via AutoAgent 2).\u003c\/li\u003e\n\u003cli\u003eSimple cloud-based delivery and updates through the EZ LYNK platform.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEmissions status: \u003cstrong\u003eCARB EO Pending\u003c\/strong\u003e. Check local and state regulations before installation.\u003c\/li\u003e\n\u003cli\u003eFor best results when towing or with added power, consider pairing with PPEI transmission tuning (if applicable to your platform).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231856394523,"sku":"PP-11-14-P-ET","price":356.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2011-2016Ford6.7LPowerstroke_EngineTuning_800x_1513d6dc-3950-4291-bb5b-fa51fff939a7.webp?v=1764717457"},{"product_id":"2011-2019-ford-6-7l-powerstroke-6r140-transmission-tuning-by-ppei","title":"2011 - 2019 Ford 6.7L Powerstroke 6R140 | Transmission Tuning by PPEI","description":"\u003ch2\u003ePPEI Transmission Calibration\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eExtend your transmission life\u003c\/strong\u003e and \u003cstrong\u003eincrease fuel economy\u003c\/strong\u003e with \u003cstrong\u003ePPEI Transmission Tuning\u003c\/strong\u003e — a must-have upgrade for tuned trucks with added torque and power.\u003c\/p\u003e\n\n\u003cp\u003ePPEI’s transmission tuning completely transforms how your truck drives by optimizing shift points, torque converter lockup, and line pressure — ensuring smoother, stronger, and more efficient operation both on and off the road.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefined Shift Points:\u003c\/strong\u003e Eliminates the low-RPM “lazy” feel that forces unnecessary downshifts, improving responsiveness and fuel economy.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized for Larger Turbos:\u003c\/strong\u003e Keeps your engine in the ideal RPM range to match your upgraded turbo’s torque curve.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTorque Converter Lockup Refinement:\u003c\/strong\u003e Delivers power to the ground more efficiently by reducing slip, improving fuel economy, and lowering transmission temperatures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom Fit Calibration:\u003c\/strong\u003e PPEI’s team can tailor your transmission tuning to match your exact driving style and performance needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose PPEI Transmission Tuning?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhances drivability and performance under load or during towing\u003c\/li\u003e\n  \u003cli\u003eReduces heat and wear for a longer transmission lifespan\u003c\/li\u003e\n  \u003cli\u003eMaximizes efficiency for both tuned and stock vehicles\u003c\/li\u003e\n  \u003cli\u003eProvides smoother, smarter shifting for a better driving experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis calibration can be installed using the following supported tuning devices:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003ePPEI RTD\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEZ LYNK AutoAgent\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHP Tuners MPVI2 \/ MPVI3 \/ MPVI4\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eRTD4\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEvery PPEI Transmission Tune is backed by precision engineering and years of testing — ensuring your truck performs stronger, lasts longer, and drives better than ever.\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231856525595,"sku":"PP-6R140-TT","price":284.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2015-2019Ford6.7LPowerstroke_TransTuning_800x_f5ec6336-3a29-4f3e-9641-73859b6400a0.webp?v=1765396726"},{"product_id":"dogbone-head-stud-kit-2011-2023-ford-6-7l-powerstroke","title":"DogBone Head Stud Kit for 2011-2023 Ford 6.7L Powerstroke","description":"\u003ch3\u003eDogBone by UnderDog Diesel – 6.7L Powerstroke Head Stud Kit (2011–2023)\u003c\/h3\u003e\n\u003cp\u003eDogBone Head Studs are engineered to exceed OEM strength and deliver uncompromising durability for high-performance diesel applications. Rated at \u003cstrong\u003e220,000 PSI tensile strength\u003c\/strong\u003e, our in-house testing revealed an \u003cstrong\u003eaverage tensile strength of 228,000 PSI\u003c\/strong\u003e, ensuring superior clamping force and long-term reliability under extreme boost and load conditions.\u003c\/p\u003e\n\u003cp\u003eEach stud is \u003cstrong\u003ethread-rolled after heat treatment\u003c\/strong\u003e, providing a smoother, stronger thread that resists fatigue and ensures optimal performance over time. Every stud also features a \u003cstrong\u003ebroached Allen head\u003c\/strong\u003e for precise and easy installation, guaranteeing accurate height setup and consistent torque.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003e8740 chromoly steel\u003c\/strong\u003e and finished with a \u003cstrong\u003eblack oxide coating\u003c\/strong\u003e for corrosion resistance, DogBone Head Studs are the ideal upgrade for towing, competition builds, or stock engines needing dependable strength and stability.\u003c\/p\u003e\n\u003ch4\u003eVehicle Fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2011–2023 Ford 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision parallel-ground washers\u003c\/li\u003e\n\u003cli\u003e12-point flange nuts\u003c\/li\u003e\n\u003cli\u003eBlack oxide corrosion-resistant finish\u003c\/li\u003e\n\u003cli\u003e220,000+ PSI 8740 chromoly construction\u003c\/li\u003e\n\u003cli\u003eBroached Allen heads for accurate installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStuds\u003c\/li\u003e\n\u003cli\u003eNuts\u003c\/li\u003e\n\u003cli\u003eWashers\u003c\/li\u003e\n\u003cli\u003eInstallation lube\u003c\/li\u003e\n\u003cli\u003eTorque specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DogBone","offers":[{"title":"Default Title","offer_id":51313876664603,"sku":"DogBone-HSK-1123-FORD-6.7L","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198847613.png?v=1762901963"},{"product_id":"ppe-316119511-replacement-high-flow-up-pipes","title":"PPE 316119511 Replacement High-Flow Up-Pipes","description":"\u003cp\u003eUpgrade the factory up-pipes on your Ford 6.7L Powerstroke with the PPE 316119511 High-Flow Replacement Up-Pipes. Designed to address the common failure points of the stock components, these up-pipes are built from premium 304 stainless steel and fully TIG-welded for superior strength and long-lasting performance.\u003c\/p\u003e\n\u003cp\u003eWith a two-inch diameter that is larger than the factory up-pipes, this design allows exhaust gases to flow more freely. The increased flow helps minimize exhaust back pressure, supporting improved turbo response and enhanced engine torque.\u003c\/p\u003e\n\u003cp\u003eInternally sleeved bellows provide the ideal balance of flexibility and durability, allowing the up-pipes to handle extreme heat and high exhaust pressures without compromising reliability. These up-pipes are engineered to retain compatibility with the factory EGT (Exhaust Gas Temperature) and EBP (Exhaust Back Pressure) sensors, making installation straightforward and hassle-free.\u003c\/p\u003e\n\u003cp\u003eStainless steel gaskets are included to ensure a secure seal and proper fit during installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel Gaskets Included\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty 304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003e50% Larger Diameter for Improved Exhaust Flow\u003c\/li\u003e\n\u003cli\u003eEnhances Turbo Efficiency and Engine Torque\u003c\/li\u003e\n\u003cli\u003eReduces Exhaust Back Pressure by Up to 65%\u003c\/li\u003e\n\u003cli\u003eRetains Compatibility with Factory EGT and EBP Sensors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Default Title","offer_id":51525597626651,"sku":"316119511","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Ford_Up_Pipe_Kit_316119511_1_72dpi.webp?v=1766525838"},{"product_id":"xdp-engine-oil-pan-bolt-kit-black-phosphate-xd622","title":"XDP Engine Oil Pan Bolt Kit (Black-Phosphate) XD622","description":"\u003cp\u003eThe XDP XD622 Engine Oil Pan Bolt Kit is designed to replace worn or damaged fasteners on the steel oil pan of 2011–2024 Ford 6.7L Powerstroke engines. This direct-fit hardware kit provides a reliable solution when factory bolts become rounded or compromised during service.\u003c\/p\u003e\n\u003cp\u003eEach kit includes fifteen Class 10.9 fasteners engineered for strength and longevity. The bolts feature a black phosphate finish that acts as an anti-galling coating while also offering corrosion resistance. With a tensile strength rated at 150,000 PSI, these fasteners are built to handle the demands of diesel engine operation.\u003c\/p\u003e\n\u003cp\u003eAn integrated flange design helps evenly distribute clamping force at the mounting surface, eliminating the need for separate washers and ensuring a secure, consistent seal during installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClass 10.9 High-Strength Fasteners\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement for Factory Oil Pan Bolts\u003c\/li\u003e\n\u003cli\u003eBlack Phosphate Coating for Reduced Galling\u003c\/li\u003e\n\u003cli\u003e150,000 PSI Tensile Strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Extreme Diesel Performance","offers":[{"title":"Default Title","offer_id":51525597659419,"sku":"XD622","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.38.12PM.png?v=1766525918"},{"product_id":"ppe-heavy-duty-cast-aluminum-engine-oil-pan","title":"PPE Heavy-Duty Cast Aluminum Engine Oil Pan | 2011-2026 Powerstroke 6.7L","description":"\u003cp\u003eEnhance both cooling performance and appearance on your Ford 6.7L Powerstroke with the PPE Cast Aluminum Engine Oil Pan. Designed as an upgrade over the factory pan, this unit is constructed from high-strength cast aluminum to improve durability while aiding in heat dissipation.\u003c\/p\u003e\n\u003cp\u003eIntegrated external cooling fins help reduce oil temperatures, supporting longer oil life and more consistent engine performance. The increased capacity adds one additional quart of oil, further contributing to improved thermal control during demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003eA stainless steel drain plug equipped with a powerful neodymium magnet is included to capture harmful ferrous particles circulating in the oil. Zinc-plated Allen head mounting hardware is also provided for a clean, secure installation. This oil pan is available in multiple finishes to match your build, including raw, black, and brushed.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-Strength Cast Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eExternal Cooling Fins for Improved Oil Temperature Control\u003c\/li\u003e\n\u003cli\u003eAdds One Quart of Oil Capacity\u003c\/li\u003e\n\u003cli\u003eStainless Steel Magnetic Drain Plug\u003c\/li\u003e\n\u003cli\u003eZinc-Plated Allen Head Mounting Hardware Included\u003c\/li\u003e\n\u003cli\u003eAvailable in Raw, Black, or Brushed Finishes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Raw","offer_id":51525626528027,"sku":"314052100","price":242.99,"currency_code":"USD","in_stock":true},{"title":"Brushed","offer_id":51525626560795,"sku":"314052110","price":260.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51525626593563,"sku":"314052120","price":260.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Heavy-Duty-Cast-Aluminum-OilPan_314052100.webp?v=1766526371"},{"product_id":"mahle-cs54886-lower-engine-gasket-set","title":"MAHLE CS54886 Lower Engine Gasket Set","description":"\u003cp\u003eThe MAHLE CS54886 Lower Engine Gasket Set provides the essential gaskets and seals required to reseal the lower portion of the engine on 2011–2014 Ford 6.7L Powerstroke models. This kit is ideal for service or repair situations where maintaining a proper oil seal is critical.\u003c\/p\u003e\n\u003cp\u003eEngineered to match original equipment specifications, MAHLE gasket sets are designed to deliver the same fit, function, and sealing performance as factory components. Each gasket is manufactured using OE-equivalent or higher-quality materials to ensure dependable sealing and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eThis set includes lower oil pan gaskets compatible with both plastic and steel oil pans. When paired with a cylinder head gasket set, it can be used as part of a complete engine reseal solution.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect OE-Style Replacement Gasket Set\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds Original Equipment Specifications\u003c\/li\u003e\n\u003cli\u003eDesigned for Proper Fit and Reliable Sealing\u003c\/li\u003e\n\u003cli\u003eIncludes Lower Oil Pan Gaskets for Plastic or Steel Oil Pans\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":51525597724955,"sku":"CS54886","price":165.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.48.29PM.png?v=1766526514"},{"product_id":"mahle-hs54886-head-set","title":"MAHLE HS54886 Head Set","description":"\u003cp\u003e\nThe MAHLE HS54886 Cylinder Head Gasket Set simplifies head gasket service on 2011–2014 Ford 6.7L Powerstroke engines by providing the critical sealing components needed for the job. Designed as a direct OE-style replacement, this set ensures proper fitment and dependable sealing performance.\n\u003c\/p\u003e\n\u003cp\u003e\nMAHLE head sets are manufactured using OE-equivalent or higher-grade materials to match factory specifications for form, fit, and function. This attention to quality helps ensure long-term durability and reliable sealing under demanding diesel engine conditions.\n\u003c\/p\u003e\n\u003cp\u003e\nThis kit includes fuel injector lines for added convenience during installation. Please note that head bolts are not included and must be sourced separately if required for your application.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOE-Style Replacement Head Gasket Set\u003c\/li\u003e\n\u003cli\u003eManufactured to Meet Stringent OE Specifications\u003c\/li\u003e\n\u003cli\u003eDesigned for Proper Fit and Reliable Sealing\u003c\/li\u003e\n\u003cli\u003eIncludes Fuel Injector Lines\u003c\/li\u003e\n\u003cli\u003eHead Bolts Not Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":51525597757723,"sku":"HS54886","price":811.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.49.15PM.png?v=1766526561"},{"product_id":"mahle-vs50658-valve-cover-gasket-set","title":"MAHLE VS50658 Valve Cover Gasket Set","description":"\u003cp\u003e\nRestore proper sealing on your 2011–2020 Ford 6.7L Powerstroke with the MAHLE VS50658 Valve Cover Gasket Set. Designed to replace worn or leaking valve cover gaskets, this kit is manufactured using OE-equivalent materials and built to factory specifications for dependable fit and performance.\n\u003c\/p\u003e\n\u003cp\u003e\nThis valve cover gasket set installs as a direct replacement for the original components and is engineered to maintain stock engine operation. MAHLE’s precision manufacturing ensures reliable sealing and long-term durability in demanding diesel applications.\n\u003c\/p\u003e\n\u003cp\u003e\nIn addition to the valve cover gasket, this comprehensive kit includes a wide range of related seals, gaskets, and hardware to support a thorough and efficient repair.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOE-Quality Construction\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Factory Replacement\u003c\/li\u003e\n\u003cli\u003eMaintains Original Engine Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eValve Cover Gasket\u003c\/li\u003e\n\u003cli\u003eCrankcase Breather Gaskets\u003c\/li\u003e\n\u003cli\u003eEGR Inlet and Outlet Tube Gaskets\u003c\/li\u003e\n\u003cli\u003eEGR Cooler to Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003eFuel Injector Crush Washers\u003c\/li\u003e\n\u003cli\u003eFuel Injector Hold-Down Bolts\u003c\/li\u003e\n\u003cli\u003eFuel Injector O-Rings\u003c\/li\u003e\n\u003cli\u003eFuel Injector Supply Tubes\u003c\/li\u003e\n\u003cli\u003eFuel Injector Valve Cover Seals\u003c\/li\u003e\n\u003cli\u003eHeater Return Tube O-Ring\u003c\/li\u003e\n\u003cli\u003eIntake Manifold Gaskets\u003c\/li\u003e\n\u003cli\u003eLow-Pressure Fuel Line to High-Pressure Fuel Pump O-Rings\u003c\/li\u003e\n\u003cli\u003eOil Filler Tube O-Ring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":51525597823259,"sku":"VS50658","price":516.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.51.13PM.png?v=1766526678"},{"product_id":"mahle-vs50658sl-valve-cover-gasket-set-left","title":"MAHLE VS50658SL Valve Cover Gasket Set (Left)","description":"\u003cp\u003e\nThe MAHLE VS50658SL Valve Cover Gasket Set is designed to replace the factory sealing components on the left side of 2011–2020 Ford 6.7L Powerstroke engines. This set restores proper sealing where leaks or worn gaskets may be present.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured to match original equipment standards, MAHLE gasket sets deliver the same form, fit, and function as factory-installed components. OE-equivalent or higher-quality materials are used to ensure consistent sealing performance and long service life.\n\u003c\/p\u003e\n\u003cp\u003e\nThis valve cover gasket set installs as a stock-style replacement and is engineered to meet or exceed original equipment specifications. It is a direct-fit solution for the left-side valve cover and cross-references to part number BC3Z-6584-C.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Stock Replacement Valve Cover Gasket Set\u003c\/li\u003e\n\u003cli\u003eDesigned for Left-Side Engine Application\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds OE Specifications\u003c\/li\u003e\n\u003cli\u003eCross-Reference: BC3Z-6584-C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":51525597856027,"sku":"VS50658SL","price":277.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.51.40PM.png?v=1766526705"},{"product_id":"powerstroke-products-loaded-stock-67l-cylinder-head-left","title":"Powerstroke Products Loaded Stock 6.7L Cylinder Head (Left)","description":"\u003cp\u003eEnsure the reliability of your Ford 6.7L Powerstroke engine by replacing damaged or compromised cylinder heads with the Powerstroke Products Loaded Stock Cylinder Head (Left), part number PP-6.7FHOEMLeft. This component is designed as a stock-style replacement to restore proper engine function without relying on questionable or reused parts.\u003c\/p\u003e\n\u003cp\u003eThis fully assembled cylinder head arrives ready for installation and includes new valves, valve springs, and seals. Designed specifically for the left (driver) side of the engine, it provides a straightforward solution for engine repair or rebuild applications.\u003c\/p\u003e\n\u003cp\u003eBacked by a one-year, unlimited mileage warranty, this loaded cylinder head offers confidence and peace of mind once installed.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoaded Cylinder Head Assembly\u003c\/li\u003e\n\u003cli\u003eIncludes Valves, Springs, and Seals\u003c\/li\u003e\n\u003cli\u003eDesigned for Left (Driver) Side Installation\u003c\/li\u003e\n\u003cli\u003eDirect Stock Replacement for 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e1-Year Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Powerstroke Products","offers":[{"title":"Default Title","offer_id":51525597921563,"sku":"PP-6.7FHOEMLeft","price":1027.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.52.18PM.png?v=1766526779"},{"product_id":"powerstroke-products-loaded-o-ring-67l-head-hd-springs-left","title":"Powerstroke Products Loaded O-Ring 6.7L Head With HD Springs (Left)","description":"\u003cp\u003eThe Powerstroke Products Loaded O-Ring Cylinder Head with Heavy-Duty Valve Springs (Left), part number PP-6.7FHhdvsLeft-O, is engineered for performance-focused 2011–2016 Ford 6.7L Powerstroke builds. This upgraded cylinder head is ideal for drivers planning future power increases while maintaining long-term reliability.\u003c\/p\u003e\n\u003cp\u003eFeaturing a precision-machined O-Ring design and upgraded heavy-duty valve springs, this head is built to support higher cylinder pressures and advanced engine modifications. It allows compatibility with performance upgrades such as larger injectors, aftermarket turbochargers, and more aggressive tuning strategies.\u003c\/p\u003e\n\u003cp\u003eThis unit arrives fully assembled with valves, seals, and heavy-duty valve springs installed, making it ready for installation on the left (driver) side of the engine. A one-year unlimited mileage warranty provides added confidence once installed. Please note that o-ring cylinder heads are not compatible with Fel-Pro head gaskets.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eO-Ringed Cylinder Head Design\u003c\/li\u003e\n\u003cli\u003eLoaded Assembly with Valves, Seals, and Heavy-Duty Valve Springs\u003c\/li\u003e\n\u003cli\u003eDesigned for Left (Driver) Side Installation\u003c\/li\u003e\n\u003cli\u003eSupports High-Performance Engine Modifications\u003c\/li\u003e\n\u003cli\u003e1-Year Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Powerstroke Products","offers":[{"title":"Default Title","offer_id":51525597954331,"sku":"PP-6.7FHhdvsLeft-O","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.57.56PM.png?v=1766527111"},{"product_id":"mahle-vs50658sr-valve-cover-gasket-set-right","title":"MAHLE VS50658SR Valve Cover Gasket Set (Right)","description":"\u003cp\u003e\nThe MAHLE VS50658SR Valve Cover Gasket Set is designed to replace the factory sealing components on the right side of 2011–2020 Ford 6.7L Powerstroke engines. This set provides a reliable solution for addressing leaks caused by worn or damaged valve cover gaskets.\n\u003c\/p\u003e\n\u003cp\u003e\nBuilt to match original equipment standards, MAHLE gasket sets deliver factory-correct fitment, sealing performance, and durability. OE-equivalent or higher-quality materials are used to ensure long-lasting reliability in demanding diesel engine environments.\n\u003c\/p\u003e\n\u003cp\u003e\nThis valve cover gasket set installs as a stock-style replacement and is engineered to meet or exceed original equipment specifications. It is intended for use on the right (passenger) side of the engine.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Stock Replacement Valve Cover Gasket Set\u003c\/li\u003e\n\u003cli\u003eDesigned for Right-Side Engine Application\u003c\/li\u003e\n\u003cli\u003eMeets or Exceeds OE Specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mahle","offers":[{"title":"Default Title","offer_id":51525597987099,"sku":"VS50658SR","price":284.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at2.59.30PM.png?v=1766527175"},{"product_id":"powerstroke-products-loaded-stock-67l-cylinder-head-right","title":"Powerstroke Products Loaded Stock 6.7L Cylinder Head (Right)","description":"\u003cp\u003e\nRestore proper engine performance on your Ford 6.7L Powerstroke by replacing worn or damaged cylinder heads with the Powerstroke Products Loaded Stock Cylinder Head (Right), part number PP-6.7FHOEMRight. This component is designed as a direct stock-style replacement for reliable engine repair or rebuild applications.\n\u003c\/p\u003e\n\u003cp\u003e\nEach cylinder head begins as a brand-new casting and comes fully assembled for convenience. Valves, valve springs, and seals are pre-installed, allowing for a straightforward installation without additional assembly. This unit is engineered specifically for the right (passenger) side of the engine.\n\u003c\/p\u003e\n\u003cp\u003e\nBacked by a one-year unlimited mileage warranty, this loaded cylinder head delivers confidence, durability, and factory-style performance once installed.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoaded Cylinder Head Assembly\u003c\/li\u003e\n\u003cli\u003eIncludes Valves, Springs, and Seals\u003c\/li\u003e\n\u003cli\u003eDesigned for Right (Passenger) Side Installation\u003c\/li\u003e\n\u003cli\u003eDirect Stock Replacement\u003c\/li\u003e\n\u003cli\u003e1-Year Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Powerstroke Products","offers":[{"title":"Default Title","offer_id":51525598052635,"sku":"PP-6.7FHOEMRight","price":1027.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.00.44PM.png?v=1766527277"},{"product_id":"powerstroke-products-loaded-o-ring-67l-head-hd-springs-right","title":"Powerstroke Products Loaded O-Ring 6.7L Head With HD Springs (Right)","description":"\u003cp\u003e\nThe Powerstroke Products Loaded O-Ring Cylinder Head with Heavy-Duty Valve Springs (Right), part number PP-6.7FHhdvsRight-O, is designed for high-performance 2011–2016 Ford 6.7L Powerstroke builds. This upgraded cylinder head offers a “build it once” solution for drivers planning future engine modifications.\n\u003c\/p\u003e\n\u003cp\u003e\nA precision o-ringed sealing surface combined with upgraded heavy-duty valve springs allows this head to support increased cylinder pressure and aggressive performance upgrades. It is well-suited for applications running larger injectors, aftermarket turbochargers, and advanced tuning while maintaining reliability.\n\u003c\/p\u003e\n\u003cp\u003e\nThis cylinder head arrives fully assembled with valves, seals, and heavy-duty valve springs installed, making it ready for installation on the right (passenger) side of the engine. It is backed by a one-year unlimited mileage warranty. Please note that o-ring cylinder heads are not compatible with Fel-Pro head gaskets.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eO-Ringed Cylinder Head Design\u003c\/li\u003e\n\u003cli\u003eLoaded Assembly with Valves, Seals, and Heavy-Duty Valve Springs\u003c\/li\u003e\n\u003cli\u003eDesigned for Right (Passenger) Side Installation\u003c\/li\u003e\n\u003cli\u003eBuilt to Support High-Performance Engine Upgrades\u003c\/li\u003e\n\u003cli\u003e1-Year Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Powerstroke Products","offers":[{"title":"Default Title","offer_id":51525598085403,"sku":"PP-6.7FHhdvsRight-O","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.01.44PM.png?v=1766527334"},{"product_id":"no-limit-fabrication-67op-billet-aluminum-deep-oil-pan","title":"No Limit Fabrication 67OP Billet Aluminum Deep Oil Pan With Drain","description":"\u003cp\u003e\nUpgrade the factory oil pan on your Ford 6.7L Powerstroke with the No Limit Fabrication 67OP Billet Aluminum Deep Oil Pan with Drain. Designed to replace the failure-prone plastic OEM pan, this heavy-duty upgrade improves durability, oil capacity, and thermal control.\n\u003c\/p\u003e\n\u003cp\u003e\nMachined from high-quality 6061 billet aluminum, this oversized oil pan helps reduce oil temperatures while significantly increasing strength and reliability. An integrated -12 ORB secondary drain port makes it ideal for compound turbocharger setups, while the included -12 ORB magnetic drain plug helps capture metallic debris circulating in the oil.\n\u003c\/p\u003e\n\u003cp\u003e\nThis deep oil pan increases total oil capacity by three quarts, providing added lubrication and improved temperature stability for demanding driving and performance applications.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision Machined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eImproves Oil Cooling and Overall Reliability\u003c\/li\u003e\n\u003cli\u003e-12 ORB Secondary Drain Port for Compound Turbo Applications\u003c\/li\u003e\n\u003cli\u003eIncludes Magnetic -12 ORB Drain Plug\u003c\/li\u003e\n\u003cli\u003eAdds Three Quarts of Additional Oil Capacity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"No Limit Fabrication","offers":[{"title":"Default Title","offer_id":51525598150939,"sku":"67OP","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.02.47PM.png?v=1766527437"},{"product_id":"wagler-crf67-connecting-rod-set","title":"Wagler CRF6.7 Connecting Rod Set","description":"\u003cp\u003eStrengthen the foundation of your 2011–2016 Ford 6.7L Powerstroke engine with the Wagler CRF6.7 Connecting Rod Set. Designed for high-horsepower and high-torque applications, these connecting rods are engineered to deliver exceptional durability for demanding performance builds.\u003c\/p\u003e\n\u003cp\u003eForged in the USA by Trenton Forging from 4340ACQ certified material, these rods feature an updated H-beam design built to handle increased power levels. Enhancements such as added beam thickness, reinforcing ribs, 3D profiling, and larger radii help minimize stress concentrations and improve overall strength compared to earlier designs.\u003c\/p\u003e\n\u003cp\u003eEach connecting rod is honed to factory specifications and designed to work with factory pistons without the need for additional clearancing. Wagler’s advanced tongue-and-groove locator design ensures precise cap alignment, eliminates offset caps, and maintains a true bore. All engineering, machining, assembly, and quality control are completed in-house by Wagler Competition Products. The rods are finished with a standard shot-peened surface and include ARP L19 3\/8-inch fasteners.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 34mm Wrist Pin Applications\u003c\/li\u003e\n\u003cli\u003eUpdated H-Beam Design for Increased Strength\u003c\/li\u003e\n\u003cli\u003eForged from 4340ACQ Certified Material\u003c\/li\u003e\n\u003cli\u003eKnown to Handle 1,750+ Horsepower\u003c\/li\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBalanced to ±1 Gram Per Set\u003c\/li\u003e\n\u003cli\u003eIncludes ARP L19 3\/8\"; Fasteners\u003c\/li\u003e\n\u003cli\u003eStandard Shot Peened Finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wagler Competition Products","offers":[{"title":"Default Title","offer_id":51525598314779,"sku":"CRF6.7","price":4363.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.07.16PM.png?v=1766527641"},{"product_id":"powerstroke-products-loaded-67l-cylinder-head-hd-springs-right","title":"Powerstroke Products Loaded 6.7L Cylinder Head With HD Springs (Right)","description":"\u003cp\u003eUpgrade the valvetrain in your 2011–2016 Ford 6.7L Powerstroke by replacing worn factory cylinder heads with the Powerstroke Products Loaded Cylinder Head with Heavy-Duty Valve Springs (Right), part number PP-6.7FHhdvsRight. Rather than re-machining old components, this assembled replacement provides a stronger, more reliable foundation for performance-oriented engine builds.\u003c\/p\u003e\n\u003cp\u003eThis cylinder head is equipped with heavy-duty valve springs designed to deliver proper valvetrain control in high-performance applications. Factory valve springs often lack the seat pressure required for aftermarket turbochargers and aggressive tuning, which can lead to valve float and potential engine damage. Upgraded spring pressure helps maintain precise valve operation, supporting improved reliability and consistent engine performance.\u003c\/p\u003e\n\u003cp\u003eArriving fully assembled with valves, seals, and heavy-duty valve springs installed, this cylinder head is ready for installation on the right (passenger) side of the engine. It is backed by a one-year unlimited mileage warranty for added peace of mind.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoaded Cylinder Head Assembly\u003c\/li\u003e\n\u003cli\u003eDesigned for Right (Passenger) Side Installation\u003c\/li\u003e\n\u003cli\u003eIncludes Valves, Seals, and Heavy-Duty Valve Springs\u003c\/li\u003e\n\u003cli\u003eImproves Valvetrain Control for Performance Applications\u003c\/li\u003e\n\u003cli\u003e1-Year Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Powerstroke Products","offers":[{"title":"Default Title","offer_id":51525598347547,"sku":"PP-6.7FHhdvsRight","price":1302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.08.06PM.png?v=1766527692"},{"product_id":"powerstroke-products-loaded-67l-cylinder-head-hd-springs-left","title":"Powerstroke Products Loaded 6.7L Cylinder Head With HD Springs (Left)","description":"\u003cp\u003e\nRestore reliability and improve valvetrain control on your 2011–2016 Ford 6.7L Powerstroke with the Powerstroke Products Loaded Cylinder Head with Heavy-Duty Valve Springs (Left), part number PP-6.7FHhdvsLeft. This fully assembled replacement is designed to address damaged cylinder heads while providing a critical upgrade for performance-driven applications.\n\u003c\/p\u003e\n\u003cp\u003e\nThis cylinder head comes equipped with Powerstroke Products heavy-duty valve springs, helping prevent valve float commonly introduced by aftermarket turbochargers and other engine modifications. Factory valve springs often lack sufficient seat pressure for increased boost and aggressive tuning, which can lead to serious engine damage. Proper spring pressure is essential for maintaining valvetrain stability and unlocking maximum performance.\n\u003c\/p\u003e\n\u003cp\u003e\nDelivered ready to install with valves, seals, and heavy-duty valve springs already in place, this cylinder head is intended for the left (driver) side of the engine. A one-year unlimited mileage warranty provides added confidence for both street and performance builds.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoaded Cylinder Head Assembly\u003c\/li\u003e\n\u003cli\u003eDesigned for Left (Driver) Side Installation\u003c\/li\u003e\n\u003cli\u003eIncludes Valves, Seals, and Heavy-Duty Valve Springs\u003c\/li\u003e\n\u003cli\u003eImproves Valvetrain Control for Modified Engines\u003c\/li\u003e\n\u003cli\u003e1-Year Unlimited Mileage Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Powerstroke Products","offers":[{"title":"Default Title","offer_id":51525598380315,"sku":"PP-6.7FHhdvsleft","price":1302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.10.03PM.png?v=1766527838"},{"product_id":"ppe-318034800-head-stud-kit","title":"PPE 318034800 Head Stud Kit","description":"\u003cp\u003eWhen maximum strength and precision matter, the PPE 318034800 Head Stud Kit is engineered to meet the demands of high-performance diesel engine builds. Designed for builders who expect more than factory hardware can provide, this stud kit delivers superior clamping force, durability, and long-term reliability in both stock and high-output applications.\u003c\/p\u003e\n\u003cp\u003eEach head stud is centerless ground for exceptional dimensional accuracy and thread rolled to Mil-S-8879 specifications. This manufacturing process improves thread strength while reducing stress concentrations, resulting in a fastener that outperforms OEM hardware. Independent testing has verified a tensile strength exceeding 231,900 PSI, making these studs well-suited for engines subjected to increased cylinder pressure.\u003c\/p\u003e\n\u003cp\u003eThe kit includes all necessary installation components, such as hardened parallel washers, nuts, and a specially formulated assembly lubricant to promote even load distribution and accurate torque readings. For best results, properly cleaned threads are critical during installation. XDP thread cleaning chasers are recommended to help ensure accurate torque values and long-term engine reliability.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from High-Strength Chromoly Alloy Steel\u003c\/li\u003e\n\u003cli\u003eTensile Strength Rated at Over 230,000 PSI\u003c\/li\u003e\n\u003cli\u003eSuitable for High-Performance and Stock Engine Applications\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Finish for Corrosion Resistance\u003c\/li\u003e\n\u003cli\u003ePrecision Thread Rolled for Reduced Stress and Increased Durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Default Title","offer_id":51525598413083,"sku":"318034800","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.11.05PM.png?v=1766527889"},{"product_id":"bd-diesel-exhaust-manifold-kit-gaskets-studs-1043007","title":"BD Diesel Exhaust Manifold Kit With Gaskets \u0026 Studs 1043007","description":"\u003cp\u003e\nAddress one of the most common failure points on the Ford 6.7L Powerstroke with the BD Diesel Exhaust Manifold Kit with Gaskets \u0026amp; Studs, part number 1043007. This complete manifold solution is engineered to improve durability and reliability in high-heat exhaust environments where factory manifolds are prone to cracking and warping.\n\u003c\/p\u003e\n\u003cp\u003e\nThese manifolds are cast from heavy-duty high-silicon ductile iron with a 0.275-inch thick wall design, making them approximately 75% thicker than stock. The increased material thickness helps retain heat, resist warping, and withstand extreme exhaust temperatures. Machined, reinforced mounting flanges further enhance strength and sealing integrity.\n\u003c\/p\u003e\n\u003cp\u003e\nThermal durability is improved through the use of longer exhaust studs and spacers, which allow for better expansion control during heat cycles. The manifolds are fully compatible with factory EGR systems and feature a high-temperature POR-15 black coating for corrosion resistance and long service life. This kit includes all required gaskets, studs, and spacers for installation, providing a comprehensive replacement solution.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-Silicon Ductile Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eApproximately 75% Thicker Walls Than Stock\u003c\/li\u003e\n\u003cli\u003eMachined, Reinforced Mounting Flanges\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature POR-15 Black Coating\u003c\/li\u003e\n\u003cli\u003eLonger Exhaust Studs and Spacers for Improved Thermal Durability\u003c\/li\u003e\n\u003cli\u003eFully Compatible with Factory EGR Systems\u003c\/li\u003e\n\u003cli\u003eDesigned Using Computational Fluid Dynamics\u003c\/li\u003e\n\u003cli\u003eIncludes Exhaust Manifold, Crossover Tube, and EGR Port Gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes Long Stud and Spacer Kits for All 8 Cylinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Notes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits early model trucks equipped with the smaller GT32 turbo\u003c\/li\u003e\n\u003cli\u003e2015–2016 Cab \u0026amp; Chassis models must verify manifold style prior to ordering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51525598478619,"sku":"1043007","price":541.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.12.27PM.png?v=1766527966"},{"product_id":"bd-diesel-left-side-exhaust-manifold-kit-1043006","title":"BD Diesel Left Side Manifold With Gaskets \u0026 Studs 1043006","description":"\u003cp\u003eEliminate a common failure point on the Ford 6.7L Powerstroke by replacing the factory exhaust manifold with the BD Diesel Driver Side Exhaust Manifold, part number 1043006. Engineered as a heavy-duty upgrade, this manifold is designed to withstand extreme exhaust temperatures that often lead to cracking and warping in OEM components.\u003c\/p\u003e\n\u003cp\u003eThe manifold is cast from high-silicon ductile iron using a robust 0.275-inch thick wall design, making it approximately 75% thicker than the factory unit. This increased material thickness improves heat retention, resists deformation, and enhances long-term durability. Reinforced, machined mounting flanges further strengthen the sealing surface for dependable performance.\u003c\/p\u003e\n\u003cp\u003eThermal durability is improved through the use of longer exhaust studs and thick spacers that better manage expansion during heat cycles. Gasket-matched exhaust ports help maintain smooth exhaust flow, and the manifold is fully compatible with factory EGR systems. Finished with a high-temperature POR-15 black coating, this kit includes the left (driver side) manifold, studs, spacers, and required gaskets for a complete installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft (Driver Side) Exhaust Manifold\u003c\/li\u003e\n\u003cli\u003eHigh-Silicon Ductile Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eApproximately 75% Thicker Walls to Prevent Warping\u003c\/li\u003e\n\u003cli\u003eGasket-Matched Exhaust Ports\u003c\/li\u003e\n\u003cli\u003eMachined, Reinforced Mounting Flanges\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature POR-15 Black Coating\u003c\/li\u003e\n\u003cli\u003eLonger Exhaust Studs for Improved Thermal Durability\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Coated Thick Spacers\u003c\/li\u003e\n\u003cli\u003eDesigned Using Computational Fluid Dynamics\u003c\/li\u003e\n\u003cli\u003eIncludes Exhaust Manifold and Crossover Tube Gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes Long Stud and Spacer Kit for All 8 Cylinders\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51525598576923,"sku":"1043006","price":351.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.14.52PM.png?v=1766528104"},{"product_id":"bd-diesel-right-side-exhaust-manifold-kit-1043005","title":"BD Diesel Right Side Exhaust Manifold Kit With Gaskets \u0026 Studs 1043005","description":"\u003cp\u003e\nReplace the factory exhaust manifold on your 2011–2014 Ford 6.7L Powerstroke pickup or 2011–2016 cab \u0026amp; chassis with the BD Diesel Right Side Exhaust Manifold, part number 1043005. This heavy-duty replacement is engineered to address one of the most common failure points on the 6.7L platform—cracked and warped exhaust manifolds caused by extreme heat.\n\u003c\/p\u003e\n\u003cp\u003e\nConstructed from high-silicon ductile cast iron with a robust 0.275-inch thick wall design, this manifold is approximately 75% thicker than the OEM unit. The added material strength helps retain heat, reduce warping, and significantly improve durability under high exhaust temperatures. Reinforced, machined mounting flanges further enhance sealing strength and long-term reliability.\n\u003c\/p\u003e\n\u003cp\u003e\nThermal performance is improved through the use of longer exhaust studs and thick spacers that better manage expansion during heat cycles. Finished with a high-temperature POR-15 black coating, this passenger-side manifold is fully compatible with factory EGR components and includes the necessary gaskets for a complete installation.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRight (Passenger) Side Exhaust Manifold\u003c\/li\u003e\n\u003cli\u003eHigh-Silicon Ductile Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eApproximately 75% Thicker Walls to Prevent Warping\u003c\/li\u003e\n\u003cli\u003eMachined, Reinforced Mounting Flanges\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature POR-15 Black Coating\u003c\/li\u003e\n\u003cli\u003eLonger Exhaust Studs for Improved Thermal Durability\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Coated Thick Spacers\u003c\/li\u003e\n\u003cli\u003eDesigned Using Computational Fluid Dynamics\u003c\/li\u003e\n\u003cli\u003eIncludes Exhaust Manifold, Crossover Tube, and EGR Port Gaskets\u003c\/li\u003e\n\u003cli\u003eIncludes Long Stud and Spacer Kit for All 8 Cylinders\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51525598609691,"sku":"1043005","price":304.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.15.25PM.png?v=1766528152"},{"product_id":"mahle-gs33703-fuel-injector-seal-kit","title":"MAHLE GS33703 Fuel Injector Seal Kit","description":"\u003cp\u003e\nThe MAHLE GS33703 Fuel Injector Seal Kit provides the essential sealing components needed to service four fuel injectors on Ford 6.7L Powerstroke engines. This kit is designed for injector maintenance or replacement where proper sealing is critical to engine performance and reliability.\n\u003c\/p\u003e\n\u003cp\u003e\nManufactured to original equipment standards, MAHLE OE gaskets and seals deliver factory-correct fitment, finish, and sealing performance. Each seal is produced using high-quality materials engineered to meet or exceed the durability of the original components, making MAHLE a trusted choice among professional technicians and engine builders.\n\u003c\/p\u003e\n\u003cp\u003e\nThis kit services four injectors; two kits are required to complete a full engine.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Injector Seal Kit\u003c\/li\u003e\n\u003cli\u003eServices (4) Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eOE-Quality Fit, Finish, and Performance\u003c\/li\u003e\n\u003cli\u003eTwo Kits Required Per Engine\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51525598707995,"sku":"GS33703","price":238.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.18.12PM.png?v=1766528296"},{"product_id":"fass-tsf17180f140g-titanium-signature-140gph-fuel-system","title":"FASS TSF17180F140G Titanium Signature Series 140GPH Fuel System","description":"\u003cp\u003e\nUpgrade the fuel delivery and filtration system on your 2011–2016 Ford F-250\/F-350 6.7L Powerstroke with the FASS Titanium Signature Series 140GPH Fuel System. Designed for stock to moderately modified trucks, this complete replacement system delivers consistent fuel pressure and volume to support aggressive tuning and fuel system upgrades up to 700 horsepower.\n\u003c\/p\u003e\n\u003cp\u003e\nRated at 140 gallons per hour and operating at high pressure, this system is engineered to provide clean, air-free fuel to protect sensitive injection components. Advanced filtration features include a 2-micron fuel filter, integrated water separation, and FASS’s patented air and vapor separation process, all working together to extend injector and injection system life.\n\u003c\/p\u003e\n\u003cp\u003e\nThis kit includes the FASS BHF-1005 bulkhead and suction tube assembly, machined from 6061 T6 billet aluminum. The bulkhead mounts directly to the factory fuel tank module, allowing the system to draw and return fuel efficiently while eliminating common 1\/4-tank and 1\/8-tank fuel starvation issues. The PTFE Teflon pickup tube can be trimmed to accommodate different tank depths, allowing safe operation down to near-empty when installed correctly.\n\u003c\/p\u003e\n\u003cp\u003e\nNoise reduction and flow efficiency are enhanced through FASS Whisper Technology, which significantly lowers operating sound while increasing fuel flow. Performance Radius Cuts inside the aluminum housing promote smooth fuel movement and prevent air reintroduction. Mass Flow Return technology continuously polishes fuel by maintaining positive pressure and returning unused, filtered fuel back to the tank. Bolt-on mounting brackets utilize factory bed bolts for a fast, drill-free installation.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e140 GPH Fuel Flow Rating\u003c\/li\u003e\n\u003cli\u003ePreset 60–65 PSI Fuel Pressure\u003c\/li\u003e\n\u003cli\u003eComplete Replacement Fuel System\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration with Water Separation\u003c\/li\u003e\n\u003cli\u003eFASS Whisper Technology for Reduced Noise\u003c\/li\u003e\n\u003cli\u003eMass Flow Return Technology for Constant Fuel Polishing\u003c\/li\u003e\n\u003cli\u003ePerformance Radius Cuts for Improved Fuel Flow\u003c\/li\u003e\n\u003cli\u003e1\/2\"; Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starting and Fuel Economy\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle and Increased Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Heater and Fuel Pressure Gauge Ports\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Rated Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eBolt-On Bracket Installation Using Factory Bed Bolts\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air, Vapor, and Debris from Diesel Fuel\u003c\/li\u003e\n\u003cli\u003eHelps Protect and Extend Injector Life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":51525598740763,"sku":"TSF17180F140G","price":759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.18.40PM.png?v=1766528335"},{"product_id":"fleece-sureflo-fuel-tank-sending-unit-fpe-sf-fmc-1116-lb","title":"Fleece SureFlo Performance Fuel Tank Sending Unit FPE-SF-FMC-1116-LB","description":"\u003cp\u003e\nThe Fleece SureFlo Performance Sending Unit (FPE-SF-FMC-1116-LB) is designed to integrate seamlessly with aftermarket lift pumps on long bed 2011–2016 Ford F-250 and F-350 6.7L Powerstroke trucks. This solution eliminates the need for fuel tank drilling, sumps, or draw straws—common modifications that can introduce air into the fuel system and lead to cavitation or persistent 1\/4-tank fuel issues.\n\u003c\/p\u003e\n\u003cp\u003e\nEngineered to install directly into the factory sending unit location, the SureFlo utilizes OE-style quick-disconnect fittings to adapt factory fuel lines at the tank. Fuel is both drawn from and returned to the internal bucket assembly, ensuring the lift pump always receives a steady fuel supply rather than air. Integrated one-way check valves allow fuel to enter the bucket even at low fuel levels, maintaining consistent delivery and eliminating fuel starvation.\n\u003c\/p\u003e\n\u003cp\u003e\nThis performance sending unit is also an excellent option for replacing a failing factory sender or for builders planning to run custom fuel lines directly to the tank. Featuring a heavy-duty billet aluminum cap, updated fuel level electronics, and universal -8 AN ports, the SureFlo provides a clean, professional fuel system upgrade without compromising reliability.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM-Style Fitment with No Tank Cutting or Drilling Required\u003c\/li\u003e\n\u003cli\u003eDesigned for Use with Aftermarket Lift Pumps\u003c\/li\u003e\n\u003cli\u003eEliminates Common 1\/4 Tank Fuel Starvation Issues\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Billet Aluminum Cap\u003c\/li\u003e\n\u003cli\u003eNew Fuel Level Electronics and Fuel Float\u003c\/li\u003e\n\u003cli\u003eUniversal -8 AN Ports for Custom Fuel Plumbing\u003c\/li\u003e\n\u003cli\u003eIncludes New O-Ring or Flange Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with cab and chassis applications\u003c\/li\u003e\n\u003cli\u003eConfirmed fitment with Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51525598773531,"sku":"FPE-SF-FMC-1116-LB","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.19.44PM.png?v=1766528410"},{"product_id":"fass-ndtsf17250f220g-no-drop-titanium-220gph-fuel-system","title":"FASS NDTSF17250F220G No-Drop Kit Titanium Series 220GPH Fuel System \u0026 Sump","description":"\u003cp\u003eEquip your 2011–2016 Ford F-250\/F-350 6.7L Powerstroke with extreme fueling capability using the FASS Titanium Signature Series No-Drop 220GPH Fuel System \u0026amp; Sump Kit. Designed for super extreme performance applications, this complete system delivers the volume, pressure, and filtration required to support aggressive tuning and high-horsepower fuel system upgrades in the 900–1200 HP range.\u003c\/p\u003e\n\u003cp\u003eRated at 220 gallons per hour and operating at high pressure, this Titanium Signature Series system provides consistent, air-free fuel delivery while protecting critical injection components. Advanced filtration includes a fine micron fuel filter, integrated water separation, and FASS’s patented air and vapor removal process to help extend injector and injection system life.\u003c\/p\u003e\n\u003cp\u003eThis no-drop kit includes the FASS BHF-1005 bulkhead and suction tube assembly, precision machined from 6061-T6 billet aluminum. The bulkhead mounts directly to the factory fuel tank module, allowing fuel to be drawn from and returned to the tank without removing it. The PTFE Teflon pickup tube can be trimmed to match varying tank depths, effectively eliminating common 1\/4-tank and 1\/8-tank fuel starvation issues.\u003c\/p\u003e\n\u003cp\u003eNoise reduction and efficiency are enhanced through FASS Whisper Technology and advanced Performance Radius Cuts, which improve fuel flow while preventing air reintroduction. Mass Flow Return technology continuously polishes fuel by maintaining positive pressure and returning unused, filtered fuel back to the tank. Bolt-on mounting brackets utilize factory bed bolts for a fast, drill-free installation, while the included fuel sump provides a stable fuel reservoir during demanding driving conditions.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e220 GPH High-Flow Fuel System\u003c\/li\u003e\n\u003cli\u003eExtra-Deep Fuel Tank Sump Included\u003c\/li\u003e\n\u003cli\u003eSupports 900–1200 HP Performance Builds\u003c\/li\u003e\n\u003cli\u003eFASS Whisper Technology for Reduced Noise\u003c\/li\u003e\n\u003cli\u003eAdvanced Air and Vapor Separation\u003c\/li\u003e\n\u003cli\u003eMass Flow Return Technology for Constant Fuel Polishing\u003c\/li\u003e\n\u003cli\u003e1\/2\"; Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eFine Micron Filtration with Water Separation\u003c\/li\u003e\n\u003cli\u003eImproves Cold Weather Starting\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eBolt-On Bracket Installation Using Factory Bed Bolts\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater and Fuel Pressure Gauge Ports\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air, Vapor, and Debris from Diesel Fuel\u003c\/li\u003e\n\u003cli\u003eImproves Efficiency, Performance, and Idle Quality\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":51525598806299,"sku":"NDTSF17250F220G","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.22.41PM.png?v=1766528584"},{"product_id":"fass-ndtspf17180f140g-no-drop-titanium-plus-140gph-fuel-system","title":"FASS NDTSPF17180F140G No-Drop Kit Titanium Series Plus 140GPH Fuel System \u0026 Sump","description":"\u003cp\u003e\nIncrease fuel delivery and reliability on your Ford F-250\/F-350 6.7L Powerstroke with the FASS Titanium Signature Series Plus No-Drop 140GPH Fuel System \u0026amp; Sump Kit. Designed for stock to high-performance applications, this complete fueling solution delivers consistent pressure and volume to support aggressive tuning and fuel system upgrades up to 700 horsepower.\n\u003c\/p\u003e\n\u003cp\u003e\nRated at 140 gallons per hour and operating at high pressure, this Titanium Signature Series Plus system provides clean, air-free fuel to protect sensitive injection components. Advanced filtration includes a fine 2-micron rating, integrated water separation, and FASS’s patented air and vapor removal process, all working together to extend injector and fuel system life.\n\u003c\/p\u003e\n\u003cp\u003e\nThis no-drop kit includes the FASS BHF-1005 bulkhead and suction tube assembly, machined from 6061-T6 billet aluminum. The bulkhead mounts directly to the factory fuel tank module, allowing fuel to be drawn from and returned to the tank without removing it. The PTFE Teflon pickup tube can be trimmed to match various tank depths, effectively eliminating common 1\/4-tank and 1\/8-tank fuel starvation issues when installed correctly.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Titanium Signature Series Plus system features upgraded ORB (O-ring boss) fittings, black anodized 6061 aluminum fittings, and black fuel line for a clean, professional installation. Noise is minimized through FASS Silencing Technology, while Performance Radius Cuts improve fuel flow and prevent air reintroduction. Mass Flow Return technology continuously polishes fuel by maintaining positive pressure and returning unused, filtered fuel back to the tank. Bolt-on mounting brackets utilize factory bed bolts for a fast, drill-free installation, and the included fuel sump provides a stable fuel reservoir under demanding conditions.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e140 GPH Fuel Flow Rating at High Pressure\u003c\/li\u003e\n\u003cli\u003eSupports Stock to 700 HP Applications\u003c\/li\u003e\n\u003cli\u003eIncludes FASS Fuel Tank Sump Kit\u003c\/li\u003e\n\u003cli\u003eNo-Drop Design for Simplified Installation\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration with Water Separation\u003c\/li\u003e\n\u003cli\u003eFASS Whisper \/ Silencing Technology for Reduced Noise\u003c\/li\u003e\n\u003cli\u003ePerformance Radius Cuts for Improved Fuel Flow\u003c\/li\u003e\n\u003cli\u003eMass Flow Return Technology for Constant Fuel Polishing\u003c\/li\u003e\n\u003cli\u003e1\/2\"; Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starting\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater and Fuel Pressure Gauge Ports\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air, and Debris from Diesel Fuel\u003c\/li\u003e\n\u003cli\u003eImproves Efficiency, Performance, and Idle Quality\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FASS Fuel Systems","offers":[{"title":"Default Title","offer_id":51525598839067,"sku":"NDTSPF17180F140G","price":869.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.23.27PM.png?v=1766528626"},{"product_id":"fleece-powerflo-in-tank-lift-pump-fpe-pf-fmc-1116-sb","title":"Fleece PowerFlo In-Tank Fuel Lift Pump FPE-PF-FMC-1116-SB","description":"\u003cp\u003e\nUpgrade the fuel delivery system on your 6.7L Powerstroke with the Fleece PowerFlo In-Tank Lift Pump Kit (FPE-PF-FMC-1116-SB). Designed as a complete, plug-and-play solution, this system replaces the factory in-tank sending unit while also upgrading the frame-mounted fuel filtration to deliver improved flow, quieter operation, and increased reliability.\n\u003c\/p\u003e\n\u003cp\u003e\nThis kit includes a new in-tank PowerFlo lift pump assembly and a frame-mounted filter base equipped with a Donaldson fuel filter to replace the factory pump and filter housing. Installation is straightforward and requires no cutting, splicing, or modification of factory fuel lines, wiring, or the fuel tank. The upgraded filter base mounts directly in the OE filter housing location and retains factory diagnostics, including the water-in-fuel sensor.\n\u003c\/p\u003e\n\u003cp\u003e\nAt the core of the system are dual ultra-quiet gerotor pumps that work together to provide increased flow capacity while maintaining smooth, consistent fuel delivery. This design allows the PowerFlo system to support engines producing up to 800 horsepower. An integrated active fill bucket eliminates the need for tank sumps or draw straws and helps prevent common fuel starvation issues. For custom fuel plumbing, the pump outlet and return ports are threaded to accept -8 O-ring fittings.\n\u003c\/p\u003e\n\u003cp\u003e\nFor maximum performance, this system can be paired with the optional Fleece under-hood filter base and fuel heater to create a comprehensive fuel delivery upgrade for your Powerstroke.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect In-Tank Lift Pump Replacement\u003c\/li\u003e\n\u003cli\u003eDual Ultra-Quiet Gerotor Pump Design\u003c\/li\u003e\n\u003cli\u003eSupports Applications Up to 800 Horsepower\u003c\/li\u003e\n\u003cli\u003eNo Cutting, Splicing, or Tank Modification Required\u003c\/li\u003e\n\u003cli\u003eRetains Factory Fuel Lines and Water-in-Fuel Sensor\u003c\/li\u003e\n\u003cli\u003eActive Fill Bucket Eliminates Need for Sumps or Draw Straws\u003c\/li\u003e\n\u003cli\u003eThreaded Outlet and Return Ports for -8 O-Ring Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowerFlo Lift Pump with Integrated Fuel Level Sender\u003c\/li\u003e\n\u003cli\u003eFrame-Mounted Filter Base with Donaldson Fuel Filter\u003c\/li\u003e\n\u003cli\u003eWater-in-Fuel Sensor\u003c\/li\u003e\n\u003cli\u003eChassis Wiring Harness and WIF Sensor Extension\u003c\/li\u003e\n\u003cli\u003eFuel Sending Unit Tank O-Ring\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Notes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating pressure: 65–70 PSI at idle\u003c\/li\u003e\n\u003cli\u003eCompatible with S\u0026amp;S Diesel Motorsport DCR conversion kits\u003c\/li\u003e\n\u003cli\u003eCompatible with S\u0026amp;S Diesel Motorsport CP4 Disaster Prevention Kits\u003c\/li\u003e\n\u003cli\u003eConfirmed fitment with Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51525598871835,"sku":"FPE-PF-FMC-1116-SB","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-23at3.24.10PM.png?v=1766528705"}],"url":"https:\/\/wwmperformance.com\/collections\/2011-2014-6-7l-powerstroke.oembed","provider":"WWM Performance","version":"1.0","type":"link"}