{"title":"2013-2018 6.7L Cummins","description":"","products":[{"product_id":"cold-air-intake-for-2013-2018-dodge-ram-cummins-6-7l","title":"S\u0026B Filters Cold Air Intake 75-5068 | 2013-2018 Cummins 6.7L","description":"\u003cp\u003e\u003cstrong\u003eCold air intake system for 2013-2018 Ram Cummins 6.7L\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to increase airflow by approximately 54.6 percent compared to the factory intake. A fully enclosed airbox helps keep dirt out and reduces heat soak, and the inlet path is shaped to minimize restriction, allowing for smooth airflow to the turbocharger.\u003c\/p\u003e\n\u003cp\u003eAn integrated swing gate automatically adjusts the air source based on driving conditions. Under heavy load, high temperatures, or at higher elevations, the gate opens a front grille duct to feed cooler, less restrictive air. During normal operation or in harsh weather such as snow, rain, or ice, the system draws air from the wheelwell inlet to protect the filter. The gate is powered by the factory active-air motor for OEM integration without diagnostic codes.\u003c\/p\u003e\n\u003cp\u003eThe filters and couplers are made from high-strength silicone for reliable sealing and long service life. These components are rated for continuous temperatures up to 400°F and resist cracking or deformation. The non-oily, high-friction surface helps prevent connections from slipping under boost.\u003c\/p\u003e\n\u003cp\u003eFor maximum airflow, the intake can be configured to use both inlets at the same time by removing the dam on the gate arm. The swing gate remains functional in this configuration and is designed to avoid triggering an Active Air Box code.\u003c\/p\u003e\n\u003cp\u003eBenefits include improved turbocharger response, reduced intake air temperatures under load, and consistent protection against dirt and water intrusion. The kit installs as a direct fit and does not require tuning.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Dry Extendable","offer_id":50975784894747,"sku":"75-5068D","price":379.0,"currency_code":"USD","in_stock":true},{"title":"Cotton Cleanable","offer_id":50975784927515,"sku":"75-5068","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/75-5068Iso10167_1.jpg?v=1756308789"},{"product_id":"s-b-filters-wf-1037-filter-wrap","title":"S\u0026B Filters Filter Wrap WF-1037 | 2013-2018 Cummins 6.7L","description":"\u003cp\u003eThis S\u0026amp;B filter wrap is designed for S\u0026amp;B cold air intake systems. Built from a breathable, lightweight material, it helps extend the life of your air filter by blocking larger debris. The wrap is washable, reusable, and made to extend filter cleaning intervals while keeping your filter protected and performing at its best.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Default Title","offer_id":50984735506715,"sku":"WF-1037","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/pdp_WF-1037_1.jpg?v=1756587643"},{"product_id":"s-b-filters-kf-1037d-replacement-filter-dry-disposable","title":"S\u0026B Filters Replacement Filter (Dry Disposable) KF-1037D | 2013-2018 Cummins 6.7L","description":"\u003cp\u003eThe KF-1037D replacement filter is designed for S\u0026amp;B cold air intake systems. It features a full round inlet radius that creates a smooth transition into the intake while allowing for a larger filter with increased surface area. This design improves both airflow and filtration. The filter uses a larger inlet, is a disposable dry type, and has been tested to ISO 5011 filtration standards.\u003c\/p\u003e","brand":"S\u0026B Filters","offers":[{"title":"Default Title","offer_id":50984735605019,"sku":"KF-1037D","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/pdp_KF-1037D_1.jpg?v=1756587800"},{"product_id":"cheetah-turbocharger-for-2013-2018-6-7l-cummins","title":"Cheetah Turbocharger FPE-351-1317 | 2013-2018 Cummins 6.7L","description":"\u003cp\u003eFleece Performance Cheetah turbochargers are built for power, reliability, and stock-appearing simplicity. Designed as direct bolt-in replacements, they do not require expensive installation kits—just bolt on and go. Featuring the exclusive 63mm FMW compressor wheel and inconel turbine wheel technology, these turbos deliver smooth throttle response, strong mid-range, and big top-end power. Every unit comes with a brand new actuator, eliminating the need for calibration programming.\u003c\/p\u003e\n\n\u003cp\u003eThe Cheetah series retains full OEM functionality, including the factory exhaust brake and warm-up features, while supporting vehicle modifications up to 700 RWHP. Each turbocharger is backed by a 2-year limited warranty and carries EO#: D-834-2 for emissions compliance.\u003c\/p\u003e\n\n\u003cp\u003eIncluded with the turbocharger are an exhaust flange gasket, exhaust flange studs and nuts, a turbo oil drain gasket, and coolant banjo sealing washers. A speed sensor is not included. Core return paperwork and instructions are provided with the turbo, and the customer is responsible for return shipping costs.\u003c\/p\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":50984736096539,"sku":"FPE-351-1317","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/fpe-351-1317-f4_1.png?v=1760027606"},{"product_id":"2013-2018-6-7-cummins-industrial-injection-reman-turbo-w-actuator-he300vg","title":"Industrial Injection Reman Turbo W\/Actuator 5326058SE | 2013-2018 Cummins 6.7","description":"\u003cp\u003eThe Industrial Injection 5326058SE remanufactured turbocharger is a high-quality replacement for 2013–2018 Ram 6.7L diesel engines. Each unit is rebuilt in-house using brand-new parts to ensure reliability, performance, and long service life. Designed as a direct replacement, this turbocharger restores proper operation without the need for modifications.\u003c\/p\u003e\n\n\u003cp\u003eIt comes equipped with an actuator, is fully pre-calibrated with OEM software, and is built to meet factory specifications for seamless installation and dependable function.\u003c\/p\u003e","brand":"Industrial Injection","offers":[{"title":"Default Title","offer_id":50984736293147,"sku":"5326058SE","price":2399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6_1800x1800_1800x1800_cfeb5a12-6c85-47cf-b8f1-e0eb98d7cd7d.jpg?v=1766084276"},{"product_id":"turbo-install-kit-cummins-6-7l-isb","title":"Alliant Power Turbo Install Kit AP0186 | Cummins 6.7L ISB","description":"\u003cp\u003eThe Alliant Power turbo install kit is designed for 6.7L ISB Cummins applications equipped with Holset HE300VG or HE351VE variable geometry turbochargers. This includes Dodge Ram trucks from 2007–2018, as well as common medium-duty applications such as Blue Bird school buses and Freightliner box trucks. The kit is engineered with OE-grade components to ensure a proper turbocharger removal and re-install, using materials specifically chosen to withstand the extreme heat of turbo operation. Unlike lower-grade alternatives, the aerospace-grade hardware in this kit maintains tensile strength under high temperatures, ensuring reliable clamp load and preventing leaks.\u003c\/p\u003e\n\n\u003cp\u003eKey benefits include special aerospace-grade mounting studs and nuts, multilayer MLS turbo mounting gaskets, premium bonded sealing washers, and Alliant Power’s guarantee of engineered quality. Every component has been selected for durability and performance under demanding conditions.\u003c\/p\u003e\n\n\u003cp\u003eIncluded in the box are: one MLS turbo mounting gasket (HE Series OE# 5260648 \/ 68005334AB), four A286 treated high-temp mounting studs (OE# 4931642 \/ 68005214AA), four stainless turbo mounting nuts (OE# 4429825 \/ 3818824), six banjo Dowty washers (OE# 68014997AA \/ 5264568 \/ 68210185AA), one oil drain gasket (OE# 68049023AA \/ 518354AA \/ 3405382), two oil drain tube O-rings (OE# 68003277AA), two oil tube O-rings (OE# 5011921AA), two oil tube O-rings (OE# 5016648AA), and one compressor V-band O-ring for select mid-range applications (OE# 3883284).\u003c\/p\u003e","brand":"Alliant Power","offers":[{"title":"Default Title","offer_id":50984736391451,"sku":"AP0186","price":69.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/ALI-AP0186.jpg?v=1756589536"},{"product_id":"dtech-dt670005-fuel-injector-connector-tube-set","title":"DTech Fuel Injector Connector Tube Set DT670005 | 2007.5-2024 Cummins 6.7L","description":"\u003cp\u003eThe DTech DT670005 fuel injector connector tube set is a direct replacement for the factory tubes in Dodge Ram 6.7L diesel engines. Also referred to as supply tubes, high-pressure connectors, connecting tubes, or feed tubes, these components deliver fuel to the injectors under high pressure. It is recommended to replace the connector tubes whenever installing new injectors to prevent leaks and ensure proper sealing.\u003c\/p\u003e\n\n\u003cp\u003eThe spherical end of each connector tube and the injector body inlet passage form a critical high-pressure seal. Any leaks at this connection can cause excessive injector return volume, hard starting, or reduced performance. This kit includes a complete set of six tubes, offering a reliable stock replacement solution.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e 100% new construction, stock replacement design, and complete connector tube set.\u003c\/p\u003e","brand":"DTech","offers":[{"title":"Default Title","offer_id":50984736719131,"sku":"DT670005","price":152.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/dipdt670005.jpg?v=1756589950"},{"product_id":"ppe-heavy-duty-cast-aluminum-flat-bottom-68rfe-transmission-pan","title":"PPE Heavy-Duty Cast Aluminum Flat Bottom 68RFE Transmission Pan 228052100\/228052110\/228052120 | 2007.5-2024 Cummins 6.7L","description":"\u003cp\u003eUpgrade the transmission in your 2007.5–2024 Dodge Ram 6.7L Diesel with the PPE heavy-duty cast aluminum flat bottom 68RFE transmission pan. Constructed from high-grade A356.0-T6 heat-treated cast aluminum alloy, this pan is built for strength and improved cooling. Internal heat sinks and external cooling fins work together with the increased fluid capacity to help lower transmission fluid temperatures, improve lubrication, and extend service life.\u003c\/p\u003e\n\u003cp\u003eThis transmission pan includes a one-inch Neodymium-magnet-equipped stainless steel drain plug to capture harmful ferrous particles from the fluid, along with dual NPT access ports for temperature probes. A new PPE 228052150 deep spin-on transmission filter is included, featuring 57% larger filtration media for maximum protection. Integrated filter supports ensure proper filter placement for consistent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Available in black, brushed, or raw finishes. Increases fluid capacity by 3 quarts. Compatible with OEM gasket and filter. Includes new deep spin-on filter (part #228052150). Features gusseted reinforcements for strength, one-inch internal baffles to reduce sloshing and improve heat dissipation, and 3\/4-inch external fins to further lower transmission fluid temperatures while increasing housing strength.\u003c\/p\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Raw","offer_id":51130875969819,"sku":"228052100","price":305.99,"currency_code":"USD","in_stock":true},{"title":"Brushed","offer_id":51130891731227,"sku":"228052110","price":325.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51130892976411,"sku":"228052120","price":325.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/68RFE-Transmission-Heavy-Duty-Cast-Aluminum-Transmission-Pan-Pacific-Performance-Engineering-765199.jpg?v=1756590408"},{"product_id":"valair-fp-68-b-billet-flex-plate","title":"Valair Billet Flex Plate FP-68-B | 2007.5–2018 Cummins 6.7L","description":"\u003cp\u003eThe Valair FP-68-B billet flex plate is a direct replacement for the factory flex plate in 2007.5–2018 Dodge Ram 6.7L diesel trucks. Built from billet steel, this flex plate is engineered for strength and durability, making it ideal for high-power applications. It is SFI approved and quality tested to ensure reliability under extreme conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e SFI approved, billet steel construction, and thoroughly quality tested for performance and safety.\u003c\/p\u003e","brand":"Valair","offers":[{"title":"Default Title","offer_id":50984736981275,"sku":"FP-68-B","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Untitled.jpg?v=1756591552"},{"product_id":"xdp-billet-tow-race-series-flex-plate-xd648","title":"XDP Billet Tow \u0026amp; Race Series Flex Plate XD648 | 2007.5-2018 Cummins 6.7L","description":"\u003cp\u003eThe XDP Billet Tow \u0026amp; Race Series Flex Plate XD648 is built to handle the extreme demands of modified Dodge Ram trucks. Whether used for racing, sled pulling, or hot shot towing, the increased power and stress placed on the drivetrain can quickly cause a factory flex plate to fail. Stock units are prone to developing heat spots from the torque converter, which can lead to cracks and even complete failure under repeated heat cycles. The XD648 flex plate eliminates these issues with superior strength and durability.\u003c\/p\u003e\n\u003cp\u003eConstructed from billet steel forgings, this flex plate is engineered to withstand up to 1,500 lbs. ft. of torque. It is precision-balanced for smooth operation and SFI 29.3 certified for use in high-performance diesel applications. A black oxide finish adds extra corrosion resistance, ensuring long service life even under harsh conditions. This makes it ideal for highly modified trucks used in competition or heavy-duty towing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e SFI 29.3 certified, rated for 1,500 lbs. ft. of torque, manufactured from billet steel forgings, black oxide finish for corrosion resistance, and backed by a 2-year\/unlimited mileage warranty. Designed with 152 teeth and internal balance. Note: Some trucks may use one or two shims or spacers with the OEM flex plate—these must be removed for installation of the XDP flex plate, as its thicker construction eliminates the need for them and ensures proper thread engagement of the bolts to the crankshaft.\u003c\/p\u003e","brand":"Extreme Diesel Performance","offers":[{"title":"Default Title","offer_id":50984737112347,"sku":"XD648","price":453.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-08-30at4.14.41PM.png?v=1756592161"},{"product_id":"xdp-flex-plate-bolt-kit-xd654","title":"XDP Flex Plate Bolt Kit XD654 | 2003-2007 Cummins 5.9L \u0026 2010-2018 Cummins 6.7L","description":"\u003cp\u003eThe XDP Flex Plate Bolt Kit XD654 provides a complete set of eight 12-point bolts designed to securely fasten your flex plate to the crankshaft in Dodge Ram applications. These high-strength bolts are rated at 190,000 PSI tensile strength and finished with black oxide coating for added durability and corrosion resistance. They are a direct-fit replacement and an essential upgrade when installing a new flex plate to ensure proper clamping force and reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Complete set of eight bolts, direct-fit replacement design, black oxide finish for protection, 190,000 PSI tensile strength, and backed by a 2-year\/unlimited mileage warranty. \u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Bolts must be torqued to 115 ft-lbs in a criss-cross pattern using blue thread locker with lubrication under the bolt head.\u003c\/p\u003e","brand":"Extreme Diesel Performance","offers":[{"title":"Default Title","offer_id":50984737210651,"sku":"XD654","price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-08-30at4.16.57PM.png?v=1756592284"},{"product_id":"ppe-225065000-transmission-fluid-thermal-bypass-valve","title":"PPE Transmission Fluid Thermal Bypass Valve 225065000 | 2013–2018 Cummins 6.7L \u0026 6.4L","description":"\u003cp\u003eThe PPE 225065000 transmission fluid thermal bypass valve is an upgraded replacement for 2013–2018 Ram 2500\/3500 trucks equipped with the 6.7L diesel or 6.4L V8 gas engine. The factory bypass valve can fail and restrict fluid from reaching the transmission cooler, while its narrow passageways limit flow. PPE’s design eliminates these drawbacks by increasing fluid flow to the cooler, helping to protect the transmission from overheating.\u003c\/p\u003e\n\u003cp\u003eThis bypass valve also includes a service plug equipped with a Neodymium magnet to capture ferrous material from the fluid. The plug can be removed to clean out debris, ensuring cleaner fluid and longer transmission life. Whether towing heavy loads or driving daily, this valve helps safeguard the transmission by maintaining proper cooling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Prevents overheating, increases fluid flow, includes Neodymium magnet service plug for debris collection, and backed by a 1-year warranty.\u003c\/p\u003e","brand":"Pacific Performance Engineering","offers":[{"title":"Default Title","offer_id":50984737276187,"sku":"225065000","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6.7L-Transmission-Fluid-Thermal-Bypass-Valve-Ram-Pacific-Performance-Engineering-727630.jpg?v=1756592349"},{"product_id":"mishimoto-mmtc-ram-15sl-transmission-cooler","title":"Mishimoto Transmission Cooler MMTC-RAM-15SL | 2015–2018 Cummins 6.7L","description":"\u003cp\u003eThe Mishimoto MMTC-RAM-15SL transmission cooler is designed to greatly improve transmission fluid cooling in 2015–2018 Dodge 6.7L diesel trucks. Built with a tube-and-fin core that includes internal fins, this cooler provides the ideal balance of fluid flow and heat dissipation. Compared to the stock cooler, it offers a 237% increase in fin area, a 226% increase in fluid capacity, and a 112% increase in core volume. The added surface area and internal fin design deliver superior cooling efficiency for demanding applications.\u003c\/p\u003e\n\u003cp\u003eInstallation is simple with no modifications required, and all necessary hardware is included for mounting. Backed by Mishimoto’s lifetime warranty with accident protection, this cooler is built to provide long-lasting reliability and performance for your transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Direct-fit replacement, 237% increase in fin area, 112% increase in core volume, 226% increase in fluid capacity, tube-and-fin core with internal fins, and lifetime warranty with accident protection.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":50984737341723,"sku":"MMTC-RAM-15SL","price":596.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/mmtc-ram-15_1_e6nvblb3pq07yh1s.jpg?v=1756592461"},{"product_id":"mishimoto-mmtc-ram-13sl-transmission-cooler","title":"Mishimoto Transmission Cooler MMTC-RAM-13SL | 2013–2014 Cummins 6.7L","description":"\u003cp\u003eThe Mishimoto MMTC-RAM-13SL transmission cooler is a direct-fit replacement designed to improve transmission cooling in 2013–2014 Ram 6.7L diesel 2500\/3500 trucks. Built with a tube-and-fin core and internal fins, this cooler equalizes fluid flow while increasing the cooling surface area. By allowing more fluid to contact the tube, the internal fins provide greater cooling efficiency and performance under load.\u003c\/p\u003e\n\u003cp\u003eCompared to the factory cooler, this unit delivers an 82% increase in core volume, 112% more external fin area, and a 1.34-quart fluid capacity for enhanced heat dissipation. Installation requires no cutting or modifications and includes everything needed for a straightforward fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Direct-fit replacement, 82% increase in core volume, 112% increase in fin area, 1.34-quart fluid capacity for improved cooling, and internal fins designed for efficient fluid distribution.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":50984737440027,"sku":"MMTC-RAM-13SL","price":596.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/mmtc-ram-13_1.jpg?v=1756592550"},{"product_id":"monster-ram-intake-and-killer-grid-heater-upgrade-2013-2018","title":"Banks Monster-Ram Intake \u0026 Killer Grid Heater Upgrade 4279 | 2013-2018 Cummins 6.7L","description":"\u003cp\u003eThe Banks Monster-Ram intake elbow improves throttle response, airflow, and fuel economy by eliminating restrictive factory components. By replacing the stock grid heater with a high-flow billet intake plate, it prevents potential engine damage while delivering greater airflow to the cylinders. Monster-Ram is the only 50-state emissions-compliant intake elbow for Ram Cummins trucks, designed to raise boost without increasing turbine drive pressure.\u003c\/p\u003e\n\n\u003cp\u003eWith a larger and less restrictive design than stock, the Monster-Ram delivers oxygen-rich air more efficiently for quicker throttle response, optimized air distribution, and improved overall performance. It outflows stock by more than 88.3%, featuring a 3-3\/8 inch inlet and four 1\/8 inch NPT ports for sensors. The system uses stock mounting points and includes a proprietary fuel line along with all required hardware. Available finishes include red powder-coated, black, or raw aluminum.\u003c\/p\u003e\n\n\u003cp\u003eWhen paired with Banks’ High-Flow Heater and Billet Intake Plate, airflow increases from 38.6 lbs\/min MAF (stock) to 72.7 lbs\/min MAF, nearly doubling efficiency. The high-flow vertical coil heater maintains cold-start performance while eliminating the restriction of the stock grid heater. This combination provides instant throttle response, stronger acceleration, and more power potential for higher horsepower applications.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped using advanced CFD, dyno testing, and on-road validation, the Monster-Ram is engineered as a direct-replacement aluminum casting. Banks redesigned the No. 1 fuel line to remove airflow obstructions caused by the stock elbow design, allowing greater flow and efficiency.\u003c\/p\u003e\n\n\u003cp\u003eExpandable with four 1\/8 inch NPT ports for sensors, the Monster-Ram is ideal for monitoring performance. Tested against competitors, it delivers more than twice the improvement of the closest alternative, making it a top choice for performance and reliability.\u003c\/p\u003e","brand":"Banks Power","offers":[{"title":"Natural","offer_id":51130933346587,"sku":"42798","price":718.0,"currency_code":"USD","in_stock":true},{"title":"Red Powder-Coated Finish (+$30)","offer_id":51130933379355,"sku":"42798-RPC","price":748.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder-Coated Finish (+$30)","offer_id":51130933412123,"sku":"42798-BPC","price":748.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Raw_Composite_PlateOnSide_C_c4fc92e9-4ddf-45b7-884f-7069bfd539dc.jpg?v=1756594170"},{"product_id":"6-7l-cummins-2007-5-2018-injector-set-s-and-s-diesel","title":"S\u0026S Diesel Injector SET 6.7C-SS-Set | 2007.5-2018 Cummins 6.7L","description":"\u003ch2\u003eS\u0026amp;S Diesel Motorsport® Injector Upgrades\u003c\/h2\u003e\n\n\u003ch3\u003eKey Benefits \u0026amp; Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProprietary nozzle honing process ensures clean and consistent holes\u003c\/li\u003e\n  \u003cli\u003eNozzles flow-matched to within \u003cstrong\u003e1% variance\u003c\/strong\u003e per set (OE standards)\u003c\/li\u003e\n  \u003cli\u003eTested to \u003cstrong\u003eViscor SAE-J967\u003c\/strong\u003e at \u003cstrong\u003e40°C \/ 100 bar\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eInjectors flow-matched to \u003cstrong\u003e3% variance\u003c\/strong\u003e per set (except TorqueMaster)\u003c\/li\u003e\n  \u003cli\u003eFlow tested at 4 different pressure\/energizing points per injector\u003c\/li\u003e\n  \u003cli\u003eInjection profiles (rate shape) aligned for consistent performance\u003c\/li\u003e\n  \u003cli\u003eInjector build spec custom-matched to nozzle flow rate for each size\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e200% (3600 cc\/min) and larger\u003c\/strong\u003e sizes feature internal body modifications\u003c\/li\u003e\n  \u003cli\u003eIncreased nozzle flow slows open\/close time for improved fueling control\u003c\/li\u003e\n  \u003cli\u003eBody modifications improve injection rate shape for smoother combustion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand new injector bodies only\u003c\/li\u003e\n  \u003cli\u003eNozzle flow rated by \u003cstrong\u003e% increase over stock\u003c\/strong\u003e (industry standard)\u003c\/li\u003e\n  \u003cli\u003eAvailable sizes:\n    \u003cul\u003e\n      \u003cli\u003eTorqueMaster\u003c\/li\u003e\n      \u003cli\u003e30% Over\u003c\/li\u003e\n      \u003cli\u003e45% Over\u003c\/li\u003e\n      \u003cli\u003e60% Over\u003c\/li\u003e\n      \u003cli\u003e80% Over\u003c\/li\u003e\n      \u003cli\u003e100% Over\u003c\/li\u003e\n      \u003cli\u003e150% Over\u003c\/li\u003e\n      \u003cli\u003e200% Over\u003c\/li\u003e\n      \u003cli\u003e250% Over\u003c\/li\u003e\n      \u003cli\u003e300% Over\u003c\/li\u003e\n      \u003cli\u003e350% Over\u003c\/li\u003e\n      \u003cli\u003e400% Over\u003c\/li\u003e\n      \u003cli\u003e450% Over\u003c\/li\u003e\n      \u003cli\u003e500% Over\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore returns required\u003c\/strong\u003e – $150 charge applies if no core is returned\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Choose an option","offer_id":51116966969627,"sku":"6.7C-SS-SET","price":2827.5,"currency_code":"USD","in_stock":true},{"title":"6.7C TorqueMaster Injector - New","offer_id":51116967002395,"sku":"6.7C-10SAC-SET","price":2827.5,"currency_code":"USD","in_stock":true},{"title":"30% over 6.7C injector - New","offer_id":51116967035163,"sku":"6.7C-30SAC-SET","price":3416.4,"currency_code":"USD","in_stock":true},{"title":"45% over 6.7C injector - New","offer_id":51116967067931,"sku":"6.7C-45SAC-SET","price":3502.2,"currency_code":"USD","in_stock":true},{"title":"60% over 6.7C injector - New","offer_id":51116967100699,"sku":"6.7C-60SAC-SET","price":3564.6,"currency_code":"USD","in_stock":true},{"title":"80% over 6.7C injector - New","offer_id":51116967133467,"sku":"6.7C-80SAC-SET","price":3658.2,"currency_code":"USD","in_stock":true},{"title":"100% over 6.7C injector - New","offer_id":51116967166235,"sku":"6.7C-100SAC-SET","price":3767.4,"currency_code":"USD","in_stock":true},{"title":"150% over 6.7C injector - New","offer_id":51116967199003,"sku":"6.7C-150SAC-SET","price":3876.6,"currency_code":"USD","in_stock":true},{"title":"200% over 6.7C injector - New","offer_id":51116967231771,"sku":"6.7C-200SAC-SET","price":4815.0,"currency_code":"USD","in_stock":true},{"title":"250% over 6.7C injector - New","offer_id":51116967264539,"sku":"6.7C-250SAC-SET","price":5115.0,"currency_code":"USD","in_stock":true},{"title":"300% over 6.7C injector - New","offer_id":51116967297307,"sku":"6.7C-300SAC-SET","price":5319.6,"currency_code":"USD","in_stock":true},{"title":"350% over 6.7C injector - New","offer_id":51116967330075,"sku":"6.7C-350SAC-SET","price":5631.6,"currency_code":"USD","in_stock":true},{"title":"400% over 6.7C injector - New","offer_id":51116967362843,"sku":"6.7C-400SAC-SET","price":5631.6,"currency_code":"USD","in_stock":true},{"title":"450% over 6.7C injector - New","offer_id":51116967395611,"sku":"6.7C-450SAC-SET","price":5865.6,"currency_code":"USD","in_stock":true},{"title":"500% over 6.7C injector - New","offer_id":51116967428379,"sku":"6.7C-500SAC-SET","price":5865.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/6.7C-SAC-SET.jpg?v=1759425466"},{"product_id":"cummins-high-pressure-pumps-s-and-s-diesel","title":"Cummins High Pressure Pumps S\u0026S Diesel","description":"\u003ch2\u003eCummins CP3 High-Performance Pumps\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins SuperSport CP3\u003c\/strong\u003e – New – Higher output above 3,500 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e10mm CP3 Options:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 10mm CP3\u003c\/strong\u003e – New – 1,325 mm³\/rev displacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 10mm High Speed CP3\u003c\/strong\u003e – New – 1,325 mm³\/rev displacement, high-speed optimized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e12mm CP3 Options:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 12mm CP3\u003c\/strong\u003e – New – 1,590 mm³\/rev displacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 12mm High Speed CP3\u003c\/strong\u003e – New – 1,590 mm³\/rev displacement, high-speed optimized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 12mm High Speed CP3 with SP3000 Supply Pump\u003c\/strong\u003e – New – 1,590 mm³\/rev displacement, paired with SP3000 supply pump (3,000 L\/hr)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e14mm CP3 Options:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 14mm CP3\u003c\/strong\u003e – New – 1,850 mm³\/rev displacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 14mm High Speed CP3\u003c\/strong\u003e – New – 1,850 mm³\/rev displacement, high-speed optimized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCummins 14mm High Speed CP3 with SP3000 Supply Pump\u003c\/strong\u003e – New – 1,850 mm³\/rev displacement, paired with SP3000 supply pump (3,000 L\/hr)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eReturn Policy: \u003c\/strong\u003eAll returns (not core returns) are subject to a 20% restocking fee. Refunds will only be issued once the item is received in new and unused condition.\u003c\/p\u003e","brand":"S\u0026S Diesel Motorsport","offers":[{"title":"Choose an option","offer_id":51116967690523,"sku":"CP3-SS-CUMMINS","price":950.0,"currency_code":"USD","in_stock":true},{"title":"Cummins CP3 - New 6.7L based - for use on dual CP3 kits, 5.9, etc - can't be sold as stock 6.7C","offer_id":51116967723291,"sku":"CP3-CU-6.7","price":950.0,"currency_code":"USD","in_stock":true},{"title":"Cummins SuperSport CP3 (higher output \u003e3500rpm) | New 6.7L-based","offer_id":51116967756059,"sku":"CP3-CU-SS","price":1130.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 10mm CP3 (1,325 mm3 \/rev displacement) | New 6.7L-based","offer_id":51116967788827,"sku":"CP3-CU-10","price":2000.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 10mm CP3 High Speed (1,325 mm3 \/rev displacement) | New 6.7L-based","offer_id":51116967821595,"sku":"CP3-CU-10-HS","price":2200.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 12mm CP3 (1,590 mm3 \/rev displacement) | New 6.7L-based","offer_id":51116967854363,"sku":"CP3-CU-12","price":2500.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 12mm CP3 High Speed (1,590 mm3 \/rev displacement) | New 6.7L-based","offer_id":51116967887131,"sku":"CP3-CU-12-HS","price":2600.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 12mm CP3 High Speed (1,590 mm3 \/rev displacement) | New 6.7L-based | with Gen2 SP3000 Mechanical Supply Pump","offer_id":51116967919899,"sku":"CP3-CU-12-HS-SP","price":3600.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 14mm CP3 (1,850 mm3 \/rev displacement) | New 6.7L-based","offer_id":51116967952667,"sku":"CP3-CU-14","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 14mm CP3 High Speed (1,850 mm3 \/rev displacement) | New 6.7L-based","offer_id":51116967985435,"sku":"CP3-CU-14-HS","price":2900.0,"currency_code":"USD","in_stock":true},{"title":"Cummins 14mm CP3 High Speed (1,850 mm3 \/rev displacement) | New 6.7L-based | with Gen2 SP3000 Mechanical Supply Pump","offer_id":51116968018203,"sku":"CP3-CU-14-HS-SP","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/CP3-CU.jpg?v=1759425581"},{"product_id":"turbo-drain-tube-kit-for-6-7l-cummins-vgt-turbochargers","title":"Turbo Drain Tube Kit For 6.7L Cummins","description":null,"brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51130875511067,"sku":"FPE-CTDT-VGT-KIT","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2025-12-17at5.50.15PM.png?v=1766019021"},{"product_id":"2013-2018-ram-6-7l-cummins-engine-tuning-by-ppei","title":"2013 - 2018 Ram 6.7L Cummins | Engine Tuning by PPEI","description":"\u003ch2\u003ePPEI Engine Calibration for 6.7L Cummins (CARB EO Pending)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGain 130+ HP over stock\u003c\/strong\u003e, tow your toys effortlessly, and experience faster acceleration with \u003cstrong\u003ePPEI’s 6.7L Cummins Engine Tuning\u003c\/strong\u003e. Each calibration is engineered for \u003cstrong\u003eoptimal efficiency\u003c\/strong\u003e, delivering the perfect balance of power, reliability, and drivability.\u003c\/p\u003e\n\u003ch3\u003ePower Levels\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel 1:\u003c\/strong\u003e +30 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel 2:\u003c\/strong\u003e +60 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel 3:\u003c\/strong\u003e +100 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel 4:\u003c\/strong\u003e +130 HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePPEI’s tuning improves throttle response, increases torque delivery, and minimizes turbo lag — resulting in smoother acceleration, confident towing, and improved fuel economy for your 6.7L Cummins.\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231855935771,"sku":"PP-CME-ET","price":356.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2013-2018Ram6.7LCummins_EngineTuningbyPPEI-769262_800x_08ad9395-f262-45d5-9155-ae734499613f.webp?v=1764700662"},{"product_id":"2013-2018-ram-6-7l-cummins-aisin-transmission-tuning-by-ppei","title":"2013 - 2018 Ram 6.7L Cummins Aisin | Transmission Tuning by PPEI","description":"\u003ch2\u003ePPEI Aisin Transmission Tuning for 2013–2018 6.7L Cummins Turbo Diesel\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eIntroducing the first-ever Aisin Transmission Tuning\u003c\/strong\u003e for 2013–2018 Ram 6.7L Cummins Turbo Diesel trucks. For owners seeking unmatched performance, control, and efficiency, PPEI delivers a groundbreaking tuning solution built from years of research and innovation. Designed specifically for towing, daily driving, and improved reliability, this is the next evolution in Cummins transmission performance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExclusive Offering:\u003c\/strong\u003e The first of its kind in the market, engineered for overall efficiency while improving shift points and torque converter lockup.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExpert Engineering:\u003c\/strong\u003e Backed by years of dedicated PPEI research and development to ensure industry-leading performance and dependability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved Shift Strategy:\u003c\/strong\u003e Experience smoother, more consistent gear transitions with an adaptive shift strategy tuned for real-world driving.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Shifts:\u003c\/strong\u003e Custom-tailored upshifts and downshifts based on throttle input for a more intuitive and responsive driving experience.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElimination of Gear Hunting:\u003c\/strong\u003e Stay in the right gear at the right time—no more unnecessary shifting. PPEI’s Aisin Tuning delivers precise power exactly when you need it most.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSupported Platforms\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEFILive:\u003c\/strong\u003e Requires AutoCal V2\/V3 or FlashScan V2\/V3 – \u003cem\u003ePass-through flashing only\u003c\/em\u003e.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEZ LYNK:\u003c\/strong\u003e Requires AutoAgent 2 or AutoAgent 3.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor use with EFILive \u0026amp; EZ LYNK ONLY.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231856132379,"sku":"PP-CME-TT-A","price":426.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2013-2018Ram6.7LCummins_AISINTRANSMISSIONTuningbyPPEI-507570_800x_8d8b542f-35fe-4a08-b6f9-2d9e9f3dd6c5.webp?v=1765331911"},{"product_id":"2013-2018-ram-6-7l-cummins-68rfe-transmission-tuning-by-ppei","title":"2013 - 2018 Ram 6.7L Cummins 68RFE | Transmission Tuning by PPEI","description":"\u003ch2\u003ePPEI Transmission Tuning for 2013–2018 Ram 6.7L Cummins 68RFE\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eExtend your transmission life and increase your fuel economy\u003c\/strong\u003e with PPEI Transmission Tuning! A \u003cstrong\u003emust-have for tuned trucks\u003c\/strong\u003e with additional torque and upgraded performance.\u003c\/p\u003e\n\n\u003cp\u003eThe refined shift points eliminate the low-RPM “lazy” feel these trucks are known for, removing the need to stab the throttle for a downshift – not cool and a fuel economy killer! For vehicles equipped with larger turbochargers, PPEI Transmission Tuning is essential to get the engine back into the proper RPM range to match the torque curve of the new turbo.\u003c\/p\u003e\n\n\u003cp\u003eAlong with improved shift points, \u003cstrong\u003ePPEI refines the torque converter lockup strategy\u003c\/strong\u003e to deliver power to the ground more efficiently. This improves fuel economy by eliminating unnecessary slip in the torque converter – which also reduces heat buildup in typical “unlocked” conditions.\u003c\/p\u003e\n\n\u003cp\u003eAt PPEI, we take pride in our work and craftsmanship. If there’s anything you’d like changed in your transmission calibration, our team will tailor it to fit your driving style — \u003cstrong\u003e“Custom Fit” performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDisclaimer for PPEI Transmission Tuning on 2013–2018 Ram 6.7L Cummins 68RFE\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e PPEI Transmission Tuning for the 2013–2018 Ram 6.7L Cummins 68RFE is a \u003cstrong\u003ecomplete flash process\u003c\/strong\u003e. When you install this transmission calibration, a \u003cstrong\u003estock engine calibration\u003c\/strong\u003e will also be installed unless PPEI Engine Tuning is already in place.\u003c\/p\u003e\n\n\u003cp\u003eIf you currently have engine tuning from another company, installing PPEI Transmission Calibration will overwrite any existing engine tuning with a stock engine calibration. This process is \u003cstrong\u003eirreversible with non-PPEI calibrations\u003c\/strong\u003e. Installing a different engine calibration after PPEI Transmission Calibration will overwrite the PPEI Transmission Calibration.\u003c\/p\u003e\n\n\u003cp\u003eUsers are advised to carefully consider compatibility before installation to avoid conflicts with other tuning modifications. This disclaimer is intended to ensure that you fully understand the integral changes that will occur to your vehicle’s calibrations upon installation of PPEI products.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Platforms:\u003c\/strong\u003e EFILive \u0026amp; EZ LYNK\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231856296219,"sku":"PP-CME-TT","price":284.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2013-2018Ram6.7LCummins_68RFETransmissionTuningbyPPEI_800x_da82b3aa-6141-402e-a0fd-5d726a725f94.webp?v=1765333422"},{"product_id":"cummins-csp5-switch","title":"Cummins CSP5 Switch","description":"\u003ch3\u003eCummins CSP5 Switch (CSP5-S)\u003c\/h3\u003e\n\u003cp\u003eUsed to control and switch tune power levels on 2013–2020 RAM Cummins 6.7L vehicles equipped with EFILive tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e EFILive only.\u003c\/p\u003e","brand":"EFILIVE","offers":[{"title":"Default Title","offer_id":51231857246491,"sku":"CSP5-S","price":74.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/EFILIVECUMMINSCSP5Switch_800x_31dbc709-bce1-4600-8a9d-33e094b033fd.webp?v=1764893619"},{"product_id":"ram-cummins-csp4-switch","title":"RAM Cummins CSP4 Switch","description":"\u003ch3\u003eRAM Cummins CSP4 Switch (CSP4-S)\u003c\/h3\u003e\n\u003cp\u003eUsed to control and switch tune power levels on 2013–2020 RAM Cummins 6.7L vehicles equipped with EFILive tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e EFILive only.\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231857279259,"sku":"CSP4-S","price":74.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/EFILIVECUMMINSCSP4Switch_800x_4b4ca2b9-e3d0-4c64-9bf7-bcf078714d3e.webp?v=1764893675"},{"product_id":"ram-cummins-dst-switch","title":"RAM Cummins DST Switch","description":"\u003ch3\u003eRAM Cummins DST Switch (PP-CDST-S)\u003c\/h3\u003e\n\u003cp\u003eUsed to control and switch tune power levels on RAM Cummins vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e For use with EZ LYNK only.\u003c\/p\u003e","brand":"PPEI Tuning","offers":[{"title":"Default Title","offer_id":51231857312027,"sku":"PP-CDST-S","price":54.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/CumminsDSTSwitch-248948_800x_a533df6c-409d-4e08-9bca-0be9e311fe34.webp?v=1764893705"},{"product_id":"cummins-cm-2350-diesel-switch-hp-tuners","title":"Cummins CM 2350 Diesel Switch | HP Tuners","description":"\u003ch3\u003eCummins CM2350 Diesel Switch | HP Tuners (H-M04-0)\u003c\/h3\u003e\n\u003cp\u003eHardware 6-position rotary switch designed for use with HP Tuners’ L5P and Cummins (CM2450 \u0026amp; CM2350) Switch-on-the-Fly Operating System.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e HP Tuners only.\u003c\/p\u003e","brand":"HP TUNERS","offers":[{"title":"Default Title","offer_id":51231857344795,"sku":"H-M04-00-CM2350","price":79.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/HPTunersDieselSwitch-663203_800x_1ac639c9-c311-4e4f-aa06-6245385b8e99.webp?v=1764893732"},{"product_id":"dogbone-exhaust-manifold-bolt-spacer-kit-1998-5-2018-5-9l-6-7l-cummins","title":"DogBone Exhaust Manifold Bolt \u0026 Spacer Kit for 1998.5-2018 5.9L\/6.7L Cummins","description":"\u003ch3\u003eDogBone Exhaust Manifold Bolt \u0026amp; Spacer Kit – Dodge 5.9L Cummins (2003–2007)\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDogBone Exhaust Manifold Bolt \u0026amp; Spacer Kit\u003c\/strong\u003e is built to replace broken or stripped factory hardware with high-strength \u003cstrong\u003eGrade 10.9 bolts\u003c\/strong\u003e and corrosion-resistant spacers. Designed for durability and performance, this complete kit provides everything needed for a secure and reliable exhaust manifold installation.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade 10.9 high-strength hardware\u003c\/strong\u003e for superior clamping force\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReplaces broken or stripped exhaust manifold bolts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable black oxide coating\u003c\/strong\u003e for long-lasting corrosion resistance\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware required for a full installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(12) Flange head exhaust bolts\u003c\/li\u003e\n\u003cli\u003e(12) Black oxide exhaust spacers\u003c\/li\u003e\n\u003cli\u003e(2) Stainless steel socket bolts\u003c\/li\u003e\n\u003cli\u003e(2) Stainless steel M10 washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment Guide:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2003–2007 Dodge 5.9L Cummins Diesel\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFactory heat shield must be removed prior to installation.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DogBone","offers":[{"title":"Default Title","offer_id":51313876730139,"sku":"DogBone-EXH-MBSK-5.9\/6.7L-CUMMINS","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198847619.png?v=1762902108"},{"product_id":"dogbone-head-stud-kit-1998-5-2024-5-9l-6-7l-cummins","title":"DogBone Head Stud Kit for 1998.5-2024 5.9L\/6.7L Cummins","description":"\u003ch3\u003eDogBone by UnderDog Diesel – Head Stud Kit for 1998.5–2024 Dodge Ram 5.9L \/ 6.7L Cummins Diesel\u003c\/h3\u003e\n\u003cp\u003eDogBone Head Studs are engineered to deliver exceptional strength and reliability for high-performance Cummins applications. Rated at \u003cstrong\u003e220,000 PSI tensile strength\u003c\/strong\u003e, these studs have been independently tested to average \u003cstrong\u003e228,000 PSI\u003c\/strong\u003e, ensuring unmatched durability under extreme boost, towing, and racing conditions.\u003c\/p\u003e\n\u003cp\u003eEach stud is \u003cstrong\u003ethread-rolled after heat treatment\u003c\/strong\u003e, providing a smoother, stronger thread profile that resists fatigue and maintains clamping force over time. Every stud also includes a \u003cstrong\u003ebroached Allen head\u003c\/strong\u003e for precise installation and accurate height adjustment.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003e8740 chromoly steel\u003c\/strong\u003e with a \u003cstrong\u003eblack oxide finish\u003c\/strong\u003e, DogBone Head Studs provide excellent corrosion resistance and are designed to perform in the toughest environments.\u003c\/p\u003e\n\u003ch4\u003eVehicle Fitment:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1998.5–2024 Dodge Ram 5.9L \/ 6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision parallel-ground washers\u003c\/li\u003e\n\u003cli\u003e12-point flange nuts\u003c\/li\u003e\n\u003cli\u003eBlack oxide corrosion-resistant finish\u003c\/li\u003e\n\u003cli\u003e220,000+ PSI 8740 chromoly construction\u003c\/li\u003e\n\u003cli\u003eBroached Allen heads for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKit Includes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStuds\u003c\/li\u003e\n\u003cli\u003eNuts\u003c\/li\u003e\n\u003cli\u003eWashers\u003c\/li\u003e\n\u003cli\u003eInstallation lube\u003c\/li\u003e\n\u003cli\u003eTorque specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DogBone","offers":[{"title":"Default Title","offer_id":51313876762907,"sku":"DogBone-HSK-5.9\/6.7-CUMMINS","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198847610.png?v=1762902302"},{"product_id":"dogbone-exhaust-manifold-stud-kit-1994-2018-5-9l-6-7l-cummins","title":"DogBone Exhaust Manifold Stud Kit for 1994-2018 5.9L\/6.7L Cummins","description":"\u003ch3\u003eDogBone Exhaust Manifold Stud Kit – Dodge Ram Cummins 5.9L \/ 6.7L (1994–2018)\u003c\/h3\u003e\n\n\u003cp\u003eUpgrade your factory exhaust manifold bolts with the \u003cstrong\u003eDogBone Exhaust Manifold Stud Kit\u003c\/strong\u003e, designed for superior strength, corrosion resistance, and a perfect leak-free seal. This complete kit includes all the hardware you need to replace your worn or broken OEM bolts with precision-fit studs and high-quality fasteners.\u003c\/p\u003e\n\n\u003cp\u003eEach stud features an \u003cstrong\u003eAllen head tip\u003c\/strong\u003e for easy thread-in installation and removal, while the \u003cstrong\u003edurable black oxide coating\u003c\/strong\u003e provides long-lasting protection against rust and corrosion. The 12-point nuts and hardened washers ensure a strong and secure seal between the manifold and cylinder head.\u003c\/p\u003e\n\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete hardware kit for secure, leak-free installation\u003c\/li\u003e\n  \u003cli\u003e(12) high-strength manifold studs with Allen head for easy installation\u003c\/li\u003e\n  \u003cli\u003e(12) 12-point nuts and (12) washers for a professional finish\u003c\/li\u003e\n  \u003cli\u003eBlack oxide coating for enhanced corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIdeal for performance builds, manifold upgrades, and factory replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eKit Includes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(12) Manifold studs\u003c\/li\u003e\n  \u003cli\u003e(12) Washers\u003c\/li\u003e\n  \u003cli\u003e(12) 12-point nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment Guide:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1994–1998 Dodge Ram 5.9L Cummins Diesel \u003cem\u003e(fits aftermarket exhaust manifolds only)\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e1998.5–2002 Dodge Ram 5.9L Cummins Diesel\u003c\/li\u003e\n  \u003cli\u003e2003–2007 Dodge Ram 5.9L Cummins Diesel \u003cem\u003e(requires removal of factory heat shield)\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003e2007.5–2018 Dodge Ram 6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DogBone","offers":[{"title":"Default Title","offer_id":51313876828443,"sku":"DogBone-EXH-MSK-5.9\/6.7L-CUMMINS","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/F198847617.png?v=1762902413"},{"product_id":"fleece-turbo-installation-kit-fpe-cumm-vgtinst-kit","title":"FLEECE TURBO INSTALLATION KIT FPE-CUMM-VGT-INST-KIT","description":"\u003cp\u003e\nThe Fleece Turbocharger Installation Kit FPE-CUMM-VGT-INST-KIT provides everything needed to properly install a VGT turbocharger on your engine. This kit is ideal for installing a new, remanufactured, or the existing turbo and ensures a proper seal and fitment during reassembly.\n\u003c\/p\u003e\n\n\u003cp\u003e\nWhile performing a turbo replacement, it’s recommended to inspect your oil feed line and oil drain tube (sold separately) and replace them if necessary to maintain optimal performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for stock VGT and stock-style VGT turbochargers\u003c\/li\u003e\n  \u003cli\u003eIncludes turbocharger exhaust inlet gasket\u003c\/li\u003e\n  \u003cli\u003eIncludes turbocharger oil drain gasket\u003c\/li\u003e\n  \u003cli\u003eTurbocharger cooling port 16mm sealing washers (4)\u003c\/li\u003e\n  \u003cli\u003eTurbocharger mounting studs (4) and nuts (4)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51589207982363,"sku":"FPE-CUMM-VGT-INST-KIT","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-05at2.15.11PM.png?v=1767647716"},{"product_id":"bd-diesel-exhaust-manifold-kit-with-gaskets-bolts-1046065","title":"BD DIESEL EXHAUST MANIFOLD KIT WITH GASKETS \u0026 BOLTS 1046065","description":"\u003cp\u003eThe BD Diesel 1046065 Exhaust Manifold With Gaskets \u0026amp; Bolts is designed to replace factory exhaust manifolds while restoring optimal exhaust flow. This fully divided pulse manifold is made from high-silicon ductile iron to endure extreme temperatures and vibrations. Precision slip joints allow for thermal expansion and contraction, reducing fatigue and increasing longevity.\u003c\/p\u003e\n\u003cp\u003eThe kit includes all necessary gaskets, bolts, and spacers for a convenient, drop-in installation. Fully EGR-compatible, this manifold ensures reliable performance and durability for your Ford 6.7L Powerstroke.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-silicon ductile iron construction for extreme temperature cycling\u003c\/li\u003e\n\u003cli\u003eThick-walled casting and slip joint prevent cracking and exhaust leaks\u003c\/li\u003e\n\u003cli\u003eIncludes EGR port, exhaust port, and turbo mount gaskets\u003c\/li\u003e\n\u003cli\u003eGrade 10.9, black oxide-coated bolts and spacers included\u003c\/li\u003e\n\u003cli\u003eFully EGR-compatible\u003c\/li\u003e\n\u003cli\u003ePre-drilled for pyrometer probes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD Diesel","offers":[{"title":"Default Title","offer_id":51589213520155,"sku":"1046065","price":731.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-05at2.17.58PM.png?v=1767652054"},{"product_id":"mopar-68rfe-transmission-oil-pan-gasket-68425659aa","title":"MOPAR 68RFE TRANSMISSION OIL PAN GASKET 68425659AA","description":"\u003cp\u003e\nPrevent transmission fluid leaks and messy driveway stains with the Mopar 68425659AA 68RFE Transmission Oil Pan Gasket. This genuine OEM replacement restores factory-level sealing for smooth and reliable operation.\n\u003c\/p\u003e\n\n\u003cp\u003e\nDesigned for Dodge Ram 2500\/3500 6.7L diesel trucks equipped with the 68RFE transmission.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect OEM Replacement\u003c\/li\u003e\n  \u003cli\u003eDurable Construction\u003c\/li\u003e\n  \u003cli\u003ePrevents Fluid Leaks\u003c\/li\u003e\n  \u003cli\u003eHelps Maintain Transmission Efficiency\u003c\/li\u003e\n  \u003cli\u003eEssential for Routine Transmission Maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":51593724231963,"sku":"68425659AA","price":41.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-06at3.21.12PM.png?v=1767738078"},{"product_id":"mopar-5179267ad-68rfe-spin-on-transmission-filter","title":"MOPAR 5179267AD 68RFE SPIN-ON TRANSMISSION FILTER","description":"\u003cp\u003e\nProtect your Dodge Ram 2500\/3500 6.7L diesel transmission with the Mopar 5179267AD 68RFE Spin-On Transmission Filter. This OEM replacement keeps transmission fluid clean, ensuring smooth shifting and long-term performance.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGenuine Mopar Part\u003c\/li\u003e\n  \u003cli\u003eDirect Spin-On Installation\u003c\/li\u003e\n  \u003cli\u003eMaintains Clean Transmission Fluid\u003c\/li\u003e\n  \u003cli\u003eHelps Extend Transmission Life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":51593731342619,"sku":"05179267AD","price":62.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-06at3.25.04PM.png?v=1767738342"},{"product_id":"mopar-5013470ae-68rfe-transmission-filter","title":"MOPAR 5013470AE 68RFE TRANSMISSION FILTER","description":"\u003cp\u003e\nEnsure your 68RFE transmission operates at peak performance with the Mopar 5013470AE Transmission Filter. This OEM replacement filter protects your transmission from harmful contaminants and debris.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGenuine Mopar Part\u003c\/li\u003e\n  \u003cli\u003eDirect-Fit Installation\u003c\/li\u003e\n  \u003cli\u003eEssential for Routine Maintenance\u003c\/li\u003e\n  \u003cli\u003eProtects Transmission From Contaminants\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":51593733144859,"sku":"05013470AE","price":74.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-06at3.28.41PM.png?v=1767738565"},{"product_id":"2007-5-2018-ram-2500-3500-tier-one-900hp-stage-3-68rfe-transmission","title":"2007.5-2018 Ram 2500 \u0026 3500 Tier One 900HP Stage 3 68RFE Transmission","description":"\u003cp\u003eTier One's Stage 3 68RFE transmission is built for 2007.5-2018 Ram 2500\/3500 6.7L Cummins trucks and designed to handle extreme power and torque applications. Rated for up to 900 horsepower, this transmission is ideal for drag racing, sled pulling, high-powered towing, or competition builds. Each unit is fully rebuilt with high-strength billet components and a performance rebuild kit to fix common 68RFE issues while increasing reliability and durability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet triple-disc torque converter\u003c\/li\u003e\n\u003cli\u003eBillet maraging steel input shaft\u003c\/li\u003e\n\u003cli\u003eBillet input clutch drum, outer drum, and center support\u003c\/li\u003e\n\u003cli\u003eBillet OD clutch hub\u003c\/li\u003e\n\u003cli\u003eBillet 4C piston and spring retainer, billet 2C piston\u003c\/li\u003e\n\u003cli\u003eBillet high-pressure valve body with accumulators and bonded separator plate\u003c\/li\u003e\n\u003cli\u003eDeep transmission pan for increased fluid capacity\u003c\/li\u003e\n\u003cli\u003ePerformance rebuild kit with new clutches, seals, and gaskets\u003c\/li\u003e\n\u003cli\u003eOEM line sensor and solenoids included\u003c\/li\u003e\n\u003cli\u003eBlack finish for a clean look under the truck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach Stage 3 transmission is inspected, cleaned, and tested for flawless operation. Valve bodies are dyno-tested, and the entire transmission is air-checked for leaks prior to shipping. Optional upgrades include bypass valve deletions and auxiliary cooler kits. Recommended for use with factory tuning, with proper break-in and relearn procedures to maintain warranty coverage. Core charge ($2,500 USD) and freight shipping apply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eVehicle fitment: 2007.5-2018 Ram 2500\/3500 6.7L Cummins\u003cbr\u003eTransmission Type: Chrysler 68RFE\u003cbr\u003ePower Rating: up to 900hp\u003cbr\u003eClutches: Borg Warner, additional overdrive, 2C \u0026amp; 4C clutch packs\u003cbr\u003eFlex Plate: OEM (upgraded billet recommended beyond 600 crank HP)\u003cbr\u003eWarranty: 2-year, unlimited mileage\u003c\/p\u003e","brand":"Tier One Transmissions","offers":[{"title":"Default Title","offer_id":51601235935515,"sku":"TODT1-68-ST3-0718-X","price":12999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-08at11.08.47AM.png?v=1767895840"},{"product_id":"2007-5-2018-ram-2500-3500-tier-one-1000hp-competition-all-out-68rfe-transmission","title":"2007.5-2018 Ram 2500 \u0026 3500 Tier One +1000HP Competition All Out 68RFE Transmission","description":"\u003cp\u003eTier One's Competition All Out 68RFE Transmission is a fully built 68RFE transmission designed for high-powered competition builds, capable of handling over 1000 horsepower for drag racing, dyno, or sled pull applications. This transmission includes a billet triple-disc torque converter, billet flex plate, billet maraging steel input shaft, Revmax billet XR clutch drum, Revmax billet center support, billet OD clutch hub, billet 4C spring retainer, billet 4C piston, billet 2C piston, billet high-pressure valve body, deep transmission pan, and performance rebuild kit.\u003c\/p\u003e\n\u003cp\u003eThe Competition All Out 68RFE fixes common stock 68RFE issues while prepping your 6.7L Cummins Ram for extreme horsepower and torque. Black finish provides a clean look under your truck, and valve bodies are both leak-checked and dyno-tested before installation. This unit is backed by a 2-year, limited warranty. An additional core charge and freight shipping are required.\u003c\/p\u003e\n\u003cp\u003eBuilt from the ground up, this transmission features fully overhauled internals with high-strength billet components for maximum durability. Key components include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet triple-disc torque converter\u003c\/li\u003e\n\u003cli\u003eBillet steel flex plate\u003c\/li\u003e\n\u003cli\u003eBillet maraging steel input shaft\u003c\/li\u003e\n\u003cli\u003eRevmax billet XR clutch drum\u003c\/li\u003e\n\u003cli\u003eRevmax billet center support\u003c\/li\u003e\n\u003cli\u003eBillet OD clutch hub\u003c\/li\u003e\n\u003cli\u003eBillet 4C spring retainer\u003c\/li\u003e\n\u003cli\u003eBillet 4C piston \u0026amp; 2C piston\u003c\/li\u003e\n\u003cli\u003eBillet high pressure valve body with billet accumulators and bonded separator plate\u003c\/li\u003e\n\u003cli\u003eDeep transmission pan with increased fluid capacity\u003c\/li\u003e\n\u003cli\u003ePerformance rebuild kit with 20 overdrive clutches, 5 2C clutches, and 5 4C clutches\u003c\/li\u003e\n\u003cli\u003eNew OEM line sensor and solenoids\u003c\/li\u003e\n\u003cli\u003eAll new gaskets and seals are air-checked for leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery Tier One Competition All Out transmission is fully disassembled, cleaned, and inspected. Planetary gear trains are checked, original pumps are flat-sanded and vacuum-tested, valve bodies are precision-tested, and TIG-welded planetary pinions are installed to ensure reliability. This transmission is designed to maintain smooth operation at extremely high horsepower levels.\u003c\/p\u003e\n\u003cp\u003eRecommended gearing for tire sizes to maintain warranty:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35\" Tire: 4.10 gears or higher\u003c\/li\u003e\n\u003cli\u003e37\" Tire: 4.30 gears or higher\u003c\/li\u003e\n\u003cli\u003e38\"+ Tire: 4.56 gears or higher\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTransmission break-in is required: 300-mile break-in with 100-mile relearn. Core charge: $2,500, refundable upon inspection of your stock transmission. Freight shipping required; inspect shipment before signing Bill of Lading.\u003c\/p\u003e","brand":"Tier One Transmissions","offers":[{"title":"Default Title","offer_id":51602897436955,"sku":"TODT1-68-C-0718-X","price":15999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-08at4.52.28PM.png?v=1767916519"},{"product_id":"bod-engineering-2018-ram-hs-security-gate-diagnostics-cable","title":"BOD Engineering 2018+ RAM HS Security Gate Diagnostics Cable","description":"\u003cp\u003e\nThe Cummins Unlock Cable is required for all 2018 and newer Ram Cummins trucks when using EFILive. This essential cable ensures proper connection and allows you to safely perform tuning or diagnostics with EFILive.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired for 2018+ Ram Cummins\u003c\/li\u003e\n  \u003cli\u003eEnables EFILive tuning and diagnostics\u003c\/li\u003e\n  \u003cli\u003eReliable and durable construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BOD Engineering","offers":[{"title":"Default Title","offer_id":51614695293211,"sku":"BOD-C-SWG-C","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot_2025-06-27_at_10.45.53_AM_800x_d30730f3-442a-4851-86c0-e5b5e0a39509.webp?v=1768246602"},{"product_id":"fish-tuning-csp5-switch-06-12-dodge-5-positions-13-21-dodge-4-positions","title":"Fish Tuning CSP5 Switch - 06-12 Dodge (5 Positions) 13-21 Dodge (4 Positions)","description":"\u003cp\u003e\nThe CSP5 Switch mounts inside your 2006-2018 Dodge 6.7L Cummins and allows you to switch your EFI Live CSP5 Tuning \"on-the-fly\". By adding the CSP5 switch to your EFI Live tuned Cummins, you can change tunes instantly without reflashing the computer through the OBD2 port. Changing tunes is as easy as turning a knob!\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5-Positions for 2006-2012 Dodge Cummins\u003c\/li\u003e\n  \u003cli\u003e4-Positions for 2013-2018 Dodge Cummins\u003c\/li\u003e\n  \u003cli\u003e\"On-The-Fly\" Tune Change\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCSP5 Installation:\u003c\/h3\u003e\n\u003cp\u003e\nYour CSP5 Switch has a nut and two washers. The bottom smooth washer must remain on the bottom with the tab located in hole number five. If it falls out, turn the switch fully counterclockwise and place the washer back with the pin in hole five. Ensure the switch moves exactly four clicks clockwise. If not, adjust accordingly.\n\u003c\/p\u003e\n\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDetachable switch with wire and OBDII pass-through connector\u003c\/li\u003e\n  \u003cli\u003eBlack aluminum knurled knob\u003c\/li\u003e\n  \u003cli\u003eNumbered 1-5 Decal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\nNote: The tune in the PCM must be configured for the CSP maps. If you have tunes from another tuner, you will need to contact them to properly set up your tunes. These are the UPDATED switches that work with ALL 2006-2007 5.9's and 2007.5-2019 6.7's.\n\u003c\/p\u003e","brand":"Fish Tuning","offers":[{"title":"Default Title","offer_id":51625108701467,"sku":"FISFTCSP5","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/csp5-450-1.jpg?v=1768328009"},{"product_id":"68rfe-transmission-solenoid-pack","title":"68RFE TRANSMISSION SOLENOID PACK","description":"\u003cp\u003eReplace the solenoid pack in your 68RFE transmission with the OEM 68RFE Solenoid Pack Assembly. This is a recommended upgrade whenever you change the valve body, especially on high-mileage transmissions. Solenoid packs can fail over time due to extreme operating temperatures, debris, and general wear. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew OEM Solenoid Pack Assembly\u003c\/li\u003e\n\u003cli\u003eRecommended replacement when changing the valve body\u003c\/li\u003e\n\u003cli\u003eWhite solenoid packs fit all 2007.5-2018 68RFE transmissions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RevMax","offers":[{"title":"Default Title","offer_id":51633750442267,"sku":"68RFE-801","price":431.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-15at10.08.46AM.png?v=1768496960"},{"product_id":"dorman-938-163-front-driveshaft-assembly","title":"DORMAN 938-163 FRONT DRIVESHAFT ASSEMBLY","description":"\u003cp\u003e\nThe Dorman 938-163 Front Driveshaft Assembly is a complete replacement for your vehicle, designed to maintain factory function. This pre-balanced assembly arrives ready to install and features 100% new yokes, tubes, and universal joints. Engineered to meet original equipment specifications, it provides a reliable direct-fit replacement that is serviceable for future maintenance. Installation is quick and simple, ensuring dependable performance and durability.\n\u003c\/p\u003e\n","brand":"Dorman","offers":[{"title":"Default Title","offer_id":51634300780827,"sku":"938-163","price":447.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-15at3.17.57PM.png?v=1768515489"},{"product_id":"mahle-vs50419-rocker-box-gasket","title":"MAHLE VS50419 ROCKER BOX GASKET","description":"\u003cp\u003eReplace the rocker box gasket on your Dodge Ram 5.9L\/6.7L Diesel with the MAHLE VS50419. This gasket is a direct-fit replacement, designed to meet or exceed factory specifications and provide a reliable seal for your engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n  \u003cli\u003eMeets Or Exceeds OE Specs\u003c\/li\u003e\n  \u003cli\u003eGasket Material: Molded Rubber\u003c\/li\u003e\n  \u003cli\u003eItem Grade: OEM Standard\u003c\/li\u003e\n  \u003cli\u003ePCV Valve Grommet: Not Included\u003c\/li\u003e\n  \u003cli\u003ePackage Quantity: 1\u003c\/li\u003e\n  \u003cli\u003eThickness: 0.25\" \/ 6.30 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51637238137115,"sku":"VS50419","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-16at8.40.41AM.png?v=1768578046"},{"product_id":"2007-5-2018-ram-2500-3500-tier-one-750hp-stage-2-68rfe-transmission","title":"2007.5-2018 Ram 2500 \u0026 3500 Tier One 750HP Stage 2 68RFE Transmission","description":"\u003cp\u003eThe Tier One Stage 2 68RFE Transmission is a fully built transmission designed for aggressive tuning, turbo upgrades, heavy towing, sled pulls, and drag strip use. It can handle up to 750 horsepower from Cummins tuning, upgraded turbos, larger injectors, and other bolt-on modifications. This drop-in transmission for 2007.5-2018 Ram 6.7L Cummins trucks includes a billet triple-disc torque converter, billet input shaft, billet input clutch drum, billet 4C retainer, billet 2C piston, billet high-pressure valve body, deep transmission pan, and a performance rebuild kit.\u003c\/p\u003e\n\n\u003cp\u003eThe Stage 2 68RFE fixes common transmission issues while allowing the truck to handle serious power for aggressive towing, off-roading, or racing applications. Valve bodies are leak-checked and dyno-tested before installation, and the transmission comes with a black finish for a clean look. Each transmission is backed by a 2-year, unlimited mileage warranty.\u003c\/p\u003e\n\n\u003cp\u003eDuring assembly, all components are disassembled, cleaned, and inspected. High-strength billet components are used throughout including the torque converter, Sonnax 300M billet input shaft, billet steel input clutch drum, billet 4C spring retainer, billet 2C piston, and the Tier One Billet High Pressure Valve Body with deep worm tracks and a bonded separator plate. A high-performance rebuild kit with 14 overdrive clutches, 4 2C clutches, and 4 4C clutches is included along with a new OEM solenoid pack and line sensor. The transmission is topped off with new seals and gaskets and air-checked for leaks before shipping.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\nVehicle Fitment: 2007.5-2018 Ram 2500 or 3500 6.7L Cummins\u003cbr\u003e\nTransmission Type: Chrysler 68RFE\u003cbr\u003e\nPower Rating: Up to 750hp\u003cbr\u003e\nTorque Converter: Billet triple-disc\u003cbr\u003e\nFlex Plate: OEM\u003cbr\u003e\nInput Shaft: Sonnax 300M Billet Steel\u003cbr\u003e\nTransmission Pan: Deep pan with increased capacity\u003cbr\u003e\nValve Body: Billet High-Pressure\u003cbr\u003e\nIntermediate Shaft: OEM\u003cbr\u003e\nClutches: Borg Warner, Additional Overdrive, 2C, \u0026amp; 4C Clutch Packs\u003cbr\u003e\nClutch Drum: Billet Steel\u003cbr\u003e\nOutput Shaft: OEM\u003cbr\u003e\nGeartrain: OEM\u003cbr\u003e\nSpring Retainers: Billet 4C\/OEM\u003cbr\u003e\nPistons: Billet 2C\/OEM\u003cbr\u003e\nSprag: OEM\u003cbr\u003e\nClutch Hub: OEM\u003c\/p\u003e\n\n\u003cp\u003eFlex Plate is strongly recommended for trucks pushing beyond 600 crankshaft horsepower. Recommended gearing: 35\" tires 4.10+, 37\" tires 4.30+, 38\"+ tires 4.56+. Transmission requires a 300-mile break-in and 100-mile relearn to maintain warranty. Core charge applies. Freight shipping is required; inspect upon delivery.\u003c\/p\u003e","brand":"Tier One Transmissions","offers":[{"title":"Default Title","offer_id":51637413839131,"sku":"TODT1-68-ST2-0718-X","price":9999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-16at10.40.24AM.png?v=1768585298"},{"product_id":"sun-coast-68-lds-locking-transmission-fluid-dipstick","title":"SUN COAST 68-LDS LOCKING TRANSMISSION FLUID DIPSTICK","description":"\u003cp\u003e\nThe Sun Coast 68-LDS Locking Transmission Fluid Dipstick replaces broken or missing dipsticks on 68RFE-equipped Dodge Ram 6.7L diesel trucks. This dipstick locks securely onto the dipstick tube and will not blow out due to internal transmission pressure.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuality Materials\u003c\/li\u003e\n  \u003cli\u003eAccurate Fluid Level Indication\u003c\/li\u003e\n  \u003cli\u003eSecure Locking Design Prevents Blow-Out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Suncoast Diesel","offers":[{"title":"Default Title","offer_id":51638001598747,"sku":"SUN68-LDS","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at8.53.45AM.png?v=1768838030"},{"product_id":"fleece-replacement-heater-core-hose-fitting-fpe-cumm-hcl-0324","title":"FLEECE REPLACEMENT HEATER CORE HOSE \u0026 FITTING FPE-CUMM-HCL-0324","description":"\u003cp\u003eEliminate leaky heater core hoses on your Dodge Ram with the Fleece Replacement Heater Core Hose \u0026amp; Fitting FPE-CUMM-HCL-0324. This direct-fit replacement features a stainless-steel barbed riser that won’t crack like the factory unit, and a high-temperature silicone hose that resists degradation over time. The kit includes thread sealant and two new hose clamps for a complete, reliable repair solution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eIncludes Thread Sealant\u003c\/li\u003e\n\u003cli\u003eStainless Steel Barbed Riser\u003c\/li\u003e\n\u003cli\u003eHigh-Temperature Silicone Hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece Performance Engineering","offers":[{"title":"Default Title","offer_id":51638001664283,"sku":"FPE-CUMM-HCL-0324","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at8.54.24AM.png?v=1768838521"},{"product_id":"edge-products-38602-cs2-cts2-cts3-display-mount","title":"EDGE PRODUCTS 38602 CS2\/CTS2\/CTS3 DISPLAY MOUNT","description":"\u003cp\u003e\nThe Edge Products 38602 CS2\/CTS2\/CTS3 Display Mount offers a durable and OEM-style installation for your Edge Insight, Evolution, or Attitude monitor in 2009-2018 Ram 1500 and 2010-2018 Ram 1500\/2500\/3500 trucks. This cast aluminum mount provides a rigid, vehicle-specific attachment while keeping your monitor positioned without obstructing your view. Installation is simple using the factory A-pillar grab handle—no drilling required. The universal uni-ball and dual T-slot design allows compatibility with various third-party phone and GPS mounts.\n\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLocates monitor for optimum viewing\u003c\/li\u003e\n  \u003cli\u003eCustom molded for vehicle-specific fit\u003c\/li\u003e\n  \u003cli\u003eMatte black coating for sleek, clean look\u003c\/li\u003e\n  \u003cli\u003eHardware and dual T-slot mount included\u003c\/li\u003e\n  \u003cli\u003eCast aluminum construction for rigidity and durability\u003c\/li\u003e\n  \u003cli\u003eWorks with all CTS3, CS2, and older CTS2 devices\u003c\/li\u003e\n  \u003cli\u003ePaintable finish for complete end-user customization\u003c\/li\u003e\n  \u003cli\u003eNo drilling required, mounts using existing A-pillar grab handle bolt hole\u003c\/li\u003e\n  \u003cli\u003eCompatible with some aftermarket mounts using similar uni-ball construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Edge Products","offers":[{"title":"Default Title","offer_id":51638001926427,"sku":"38602","price":63.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at9.08.20AM.png?v=1768838913"},{"product_id":"mahle-f32482-egr-cooler-gasket","title":"MAHLE F32482 EGR COOLER GASKET","description":"\u003cp\u003e\nReplace the faulty EGR Cooler gasket on a 2007.5-2018 Dodge 6.7L Diesel with the MAHLE F32482 EGR Cooler Gasket. Designed to meet OE specifications, this gasket can handle high temperatures and maintain factory-level performance. Constructed from steel, it fits between the exhaust manifold and bypass valve to ensure reliable operation.\n\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51638002155803,"sku":"F32482","price":11.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at9.10.39AM.png?v=1768839044"},{"product_id":"mahle-g32480-egr-cooler-to-manifold-gasket","title":"MAHLE G32480 EGR COOLER TO MANIFOLD GASKET","description":"\u003cp\u003e\nThe MAHLE G32480 EGR Cooler To Manifold Gasket provides a tight seal for 2007.5-2018 Dodge 6.7L Diesel engines. Made from OE quality materials, this multi-layered steel gasket ensures factory-level performance and durability. Designed specifically for the cooler mounting location, it installs between the EGR cooler and the manifold.\n\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51638002286875,"sku":"G32480","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at9.11.11AM.png?v=1768839075"},{"product_id":"mahle-g32463-turbocharger-mounting-gasket","title":"MAHLE G32463 TURBOCHARGER MOUNTING GASKET","description":"\u003cp\u003eThe MAHLE G32463 Turbocharger Mounting Gasket is constructed from multi-layer steel to provide a solid, OEM-quality seal for 2007.5-2018 Dodge 6.7L Diesel engines. Designed to meet factory specifications, this gasket ensures reliable turbocharger mounting while maintaining stock performance.\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51638002352411,"sku":"G32463","price":12.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at9.11.58AM.png?v=1768839124"},{"product_id":"mahle-ms19225-exhaust-manifold-gasket-set","title":"MAHLE MS19225 EXHAUST MANIFOLD GASKET SET","description":"\u003cp\u003eThe MAHLE MS19225 Exhaust Manifold Gasket Set provides a direct OE-style replacement for 5.9L and 6.7L Dodge Diesel engines. This set includes six gaskets designed for the exhaust manifold to cylinder head mating surfaces, ensuring a reliable seal and maintaining factory performance. (Turbocharger mounting gasket not included.)\u003c\/p\u003e","brand":"MAHLE","offers":[{"title":"Default Title","offer_id":51638002417947,"sku":"MS19225","price":16.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at9.12.45AM.png?v=1768839310"},{"product_id":"cummins-4945701-genuine-bell-housing-adapter-cam-seal","title":"CUMMINS 4945701 GENUINE BELL HOUSING ADAPTER CAM SEAL (PLATE TO BLOCK)","description":"\u003cp\u003e\nThe Cummins 4945701 Bell Housing Adapter Cam Seal (Plate to Block) is a genuine OEM replacement designed for Dodge\/RAM 5.9L and 6.7L diesel engines. This seal fits between the engine block and the bell housing, sealing the cam port effectively. It is recommended to replace this seal whenever the bell housing is removed to ensure a proper seal and prevent leaks.\n\u003c\/p\u003e","brand":"Cummins","offers":[{"title":"Default Title","offer_id":51638002516251,"sku":"4945701","price":6.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/Screenshot2026-01-19at9.15.44AM.png?v=1768839359"},{"product_id":"mopar-68005256aa-throttle-body-gasket","title":"Throttle Body Gasket - Mopar (68005256AA)","description":"\u003cp\u003e\nThis Intake Throttle Valve is a brand-new replacement component compatible with 6.7L I6 Cummins Turbo Diesel engines. It fits all manual transmissions, including the 6-speed G56, as well as 6-speed automatic Aisin transmissions (AS69RC, AS68RC), and the 68RFE automatic transmission. Designed for direct-fit installation, it restores proper airflow and throttle response for your engine.\n\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":51638002581787,"sku":"68005256AA","price":24.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5757\/3147\/files\/2cd353214af3e3e820668aff59d3ed34.jpg?v=1768839601"}],"url":"https:\/\/wwmperformance.com\/collections\/2010-2012-6-7l-cummins-copy-1.oembed","provider":"WWM Performance","version":"1.0","type":"link"}